- Computers & electronics
- Audio & home theatre
- TV set-top boxes
- Motorola
- DCT6412 DUAL-TUNER DVR AND HD SET-TOP - MICROSOFT FOUNDATION
- User manual
CAUTION. Arris DCT6412 DUAL-TUNER DVR AND HD SET-TOP - MICROSOFT FOUNDATION, DCT 6400, DCT6412, DCT6400 Series 44 Pages
CAUTION. Arris DCT6412 DUAL-TUNER DVR AND HD SET-TOP - MICROSOFT FOUNDATION, DCT 6400, DCT6412, DCT6400 Series
Add to My manuals44 Pages
advertisement
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Graphical symbols and supplemental warning marking locations on bottom of terminal.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION
TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
REPAIRS
If you find the unit in need of repair, call Motorola Support at 1-866-668-2271 or 1-866-MOT-BCS1.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close as possible to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING
Electric service equipment
Ground clamp
Antenna lead in wire
Antenna discharge unit
(NEC Section 810-20)
Grounding clamps
Grounding conductors
(NEC Section 810-21)
Power service grounding electrode system
(NEC Article 250, Part H)
NEC=NATIONAL ELECTRICAL CODE
advertisement
Related manuals
advertisement
Table of contents
- 1 Front Cover
- 2 CAUTION
- 3 IMPORTANT SAFETY INSTRUCTIONS
- 6 Software License
- 8 CONTENTS
- 10 INTRODUCTION
- 13 OPERATION
- 14 DIGITAL VIDEO RECORDER (DVR)
- 16 OPTIMIZING YOUR DCT* FOR HIGH DEFINITION TV
- 18 User Settings
- 21 ON-SCREEN GRAPHICS
- 22 CONNECTING YOUR DCT*
- 23 Video Connection Options
- 24 Important Safety Considerations
- 25 CONNECTING YOUR DCT* TO A HDTV – VIDEO ONLY
- 27 CONNECTING YOUR DCT* TO A HDTV – AUDIO ONLY
- 29 CONNECTING YOUR DCT* TO AN A/V RECEIVER – AUDIO ONLY
- 31 CONNECTING YOUR DCT* TO A STEREO TV
- 33 CONNECTING YOUR DCT* TO A STEREO TV AND STEREO VCR
- 35 CONNECTING YOUR DCT* TO AN A/V RECEIVER, TV, AND VCR
- 37 RECORDING YOUR CONNECTIONS
- 38 DATA DEVICES
- 39 TROUBLESHOOTING
- 44 Back Cover