CONNECTING YOUR DCT* TO A HDTV – VIDEO ONLY. Arris DCT6412 DUAL-TUNER DVR AND HD SET-TOP - MICROSOFT FOUNDATION, DCT 6400, DCT6412, DCT6400 Series

CONNECTING YOUR DCT* TO A HDTV – VIDEO ONLY

DVI connection

Component video connection

IEEE 1394 connection

CABLE

IN

IR

ETHERNET

USB

R AUDIO IN L

SPDIF IN

VIDEO

OUT

DVI-D OUT

TV

Pass Card

AUDIO OUT Y Pb

Pr

S-VIDEO

OPTICAL

SPDIF

IEEE 1394

DCT6400 Series

Cable in

Either / or

CABLE/

ANTENNA IN

DVI-HDTV

IEEE 1394

HDTV

Component

Video Input

Y

Pb

Pr

18

DCT6400 Series User Guide

Connecting HDTV – Video Only

Component Video (YPbPr)

1

Connect an RF coaxial cable to the cable wall outlet and the

CABLE IN

connector on the DCT*.

2

Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and DCT*.

This connection supports only the high-definition video connection between the DCT* and the HDTV. To connect the audio connections for your HDTV, proceed to the following page. To connect your audio connections for an A/V receiver, go to “Connecting Your DCT* to an A/V

Receiver – Audio Only.”

IEEE 1394

If your HDTV has an IEEE 1394 connector, you can use the IEEE 1394 for both your video and audio connection:

•

Connect an IEEE 1394 cable to the

HDTV and DCT*.

IEEE

1394

connector on your

On-screen graphics will not be displayed when you are using the

IEEE 1394 connection on the rear panel of the DCT*.

DVI

If your TV has a DVI input, use the DVI connection for your video:

•

Connect a DVI cable to the

DVI

-

D OUT

the

DVI

-

HDTV

connector on your TV.

connector on the DCT* and

This connection supports only the high-definition video connection between the DCT* and the HDTV. To connect the audio connections for your HDTV, proceed to the following page. To connect your audio connections for an A/V receiver, go to “Connecting Your DCT* to an A/V

Receiver – Audio Only.”

For information on configuring your DCT* settings, see “Optimizing Your

DCT* for High Definition TV.”

19