Identifying parts. Sony DSC-H3, cyber shot dsc h3b, cyber shot dsc h3s

Add to My manuals
123 Pages

advertisement

Identifying parts. Sony DSC-H3, cyber shot dsc h3b, cyber shot dsc h3s | Manualzz

14

Identifying parts

See the pages in parentheses for details of operation.

6

1

2

3

4

5

6

2

3

4

5

A POWER button

B POWER lamp

C Mode dial (23)

D Shutter button (24)

E Microphone

F Flash (26)

G AF illuminator (70)/Self-timer lamp

(27)

H Hook for shoulder strap

I Lens

7

8

9 qd qs qa qj qh qg qf

A For shooting: W/T (Zoom) button (25)

For viewing: / (Playback zoom) button/

(Index) button (33, 34)

B

(Playback) button (33)

C LCD screen (21)

D MENU button (39)

E HOME button (37)

F Hook for shoulder strap

G Jack cover

H Multi connector

Used in the following situations:

• Making a USB connection between the camera and the computer.

• Making a connection to audio/video input jacks on a TV.

• Making a connection to a PictBridge compliant printer.

7

8

9

0

Identifying parts

I DC IN jack

When using an AC-LS5K AC Adaptor (not supplied)

1

To DC IN jack v mark

2

To wall outlet

• You cannot charge the battery pack by connecting the camera to the AC-LS5K AC

Adaptor. Use the battery charger (supplied) to charge the battery pack.

J Control button

Menu on: v/V/b/B/z (39)

Menu off: DISP/ /

/ (21, 26)

When the mode dial is set to M:

Shutter Speed/Aperture (31)

K Speaker (bottom)

L Battery/“Memory Stick Duo” cover

(bottom)

M Tripod receptacle (bottom)

• Use a tripod with a screw less than 5.5 mm

(7/32 inch) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

N Battery insertion slot

O Battery eject lever

P “Memory Stick Duo” slot

Q Access lamp

15

16

Identifying parts

Lens hood/Adaptor ring

A Lens hood

B Adaptor ring

Attaching the lens hood

When you shoot in bright lighting conditions, such as outdoors, we recommend that you use the lens hood to reduce the image quality deterioration caused by unnecessary light.

1

Attach the adaptor ring while the power is off.

• You can attach the lens cap with the lens hood attached.

• When using the lens hood, be careful that the following:

– The AF illuminator light may be blocked.

– The flash light may be blocked, causing the shadow to appear when using the built-in flash.

Storing the lens hood

The lens hood can be attached in the reverse direction to store it with the camera when it is not in use.

Position the lens hood as shown below and turn the lens hood clockwise until it clicks.

2

Position the lens hood as shown below and turn the lens hood clockwise until it clicks.

Attaching a conversion lens (not supplied)

When you want to do enhanced wide-angle shots or zoom-in shots on distant objects, attach a conversion lens.

1 Attach the adaptor ring.

2 Attach a conversion lens.

• When shooting with the conversion lens, go through the settings of [Conversion Lens]

(page 72).

• Refer also to the operating instructions supplied with your conversion lens.

advertisement

Key Features

  • Bridge camera 8.1 MP CCD Black
  • Image sensor size: 1/2.5"
  • Optical zoom: 10x Digital zoom: 20x
  • ± 2EV (1/3EV step)
  • Video recording 640 x 480 pixels
  • Built-in microphone Voice recording PictBridge
  • Lithium-Ion (Li-Ion)

Related manuals

Download PDF

advertisement

Table of contents