3. Software Device Driver & Application Utility Installation. OvisLink AirLive AirTV-1000U v2

3. Software Device Driver & Application Utility

Installation

This chapter describes how to install the Device Driver and Software Utilities.

1) After installing the DVB-T Receiver in your PC or Notebook, the system will find a new hardware device and Windows of “Found New Hardware Wizard” will appear. Please click “Cancel” to exit the Wizard.

2) Please insert the Installation CD into your CD drive, the CD will auto-run and show the main installation screen as below:

AirLive AirTV-1000U v2 User’s Manual

7

Install Driver: Click Install Driver to start device driver installation process.

ArcSoft TotalMedia: Click this option to install ArcSoft TotalMedia software.

Microsoft DirectX9: Click this option to install DirectX 9 utility.

Windows Media Player 9: Click this option to install Media Player 9 software.

User’s Manual: Click this option to read user’s manual and specification

Acrobat® Reader: Click this option to install Acrobat Reader

Attention: It is highly recommended to install Microsoft DirectX9 & Windows Media Play 9 IN THE

BEGINNING if your system hasn’t had those components yet.

3.1 Install Microsoft DirectX9

Before installing device driver, it is necessary to install DirectX 9 or higher for your Operating System. If your system already has DirectX 9 or higher version, you can skip this part of installation and go to 3.2

Install Windows Driver for device driver installation.

Step 1: Click “Microsoft DirectX9” to start installing DirectX9.

8

AirLive AirTV-1000U v2 User’s Manual

Step 2: In “Installing Microsoft® DirectX®” window, select “I accept the agreement”, and then click

“Next” to continue.

Step 3: Click “Next” to continue installation.

AirLive AirTV-1000U v2 User’s Manual

9

Step 4: Waiting for the operating system finishes installing DirectX 9 components.

Note: If your system had already been installed DirectX9 or higher version before, the “Installation

Complete” window below will appear. Click “Finish” and the components are ready to use. Then, please go to 3.2 “Install Windows Driver” for device driver installation.

10

AirLive AirTV-1000U v2 User’s Manual

Step 5: After operating system completes DirectX9 installation, the “Restart Computer” window below will appear. Click “Finish” to restart your system.

Step 6: Once the computer is rebooted, your system will find the DTV hardware device which are not installed yet. When the below Wizard window is shown, please click “Cancel” to continue.

After you finish those steps, please run the Installation CD again and click “Install Driver” to install the Device Drivers. (Please refer to the next section “3.2 Install Driver”)

AirLive AirTV-1000U v2 User’s Manual

11

3.2 Install Windows Driver (Windows 2000, XP and Vista)

Attention: Your Operating System MUST has DirectX9 or higher version before you install the driver. If your system is not installed yet, please refer to “3.1 Install DirectX9” and begin the installation.

Step 1: Click “Install Driver” from the manual that appears to install the device driver.

Step 2: The Welcome wizard below will appear. Click “Next” to continue.

12

AirLive AirTV-1000U v2 User’s Manual

Step 3: Click “Next” to continue.

Step 4: Please wait for while during device driver is installing.

AirLive AirTV-1000U v2 User’s Manual

13

Step 5: Before using the device, it is recommend that restarting the computer for device complete the setting. Choose “Yes, I want to restart my computer now” and click “Finish” to restart.

Step 6: To check if the driver is properly installed:

[For Windows 2000]

Start Æ Settings Æ Control Panel Æ System Æ “Hardware” tab Æ choose

“Device Manager”

14

AirLive AirTV-1000U v2 User’s Manual

[For Windows XP]

Click Start Æ Settings Æ Control Panel Æ System Æ “Hardware” tab Æ choose

“Device Manager”.

[For Windows Vista]

Click Start Æ Control Panel Æ choose “Device Manager”.

AirLive AirTV-1000U v2 User’s Manual

15

3.3 Install Windows Media Player 9

Before installing ArcSoft TotalMedia application program, it is necessary to install Media Player 9 or higher for your Operating System. If your system already has Media Player 9, you can skip this part of installation and go to 3.4 Install ArcSoft TotalMedia software for ArcSoft TotalMedia software installation.

Step 1: Click “Windows Media Player 9” button from setup program of the installation CD.

Step 2: Select the language version which you want to install and click “OK” to continue.

16

AirLive AirTV-1000U v2 User’s Manual

Step 3: Click “I Accept” to continue the next step.

Step 4: Please wait for a few seconds for Installing.

AirLive AirTV-1000U v2 User’s Manual

17

Step 5: Click “Next” to continue.

Step 6: Select your Privacy Options in this step and click “Next” to continue.

18

AirLive AirTV-1000U v2 User’s Manual

Step 7: Configure your desktop and Windows Media Player 9 Series default settings, and then click “Finish” to exit the wizard.

3.4 Install ArcSoft TotalMedia Software

Attention: To execute TotalMedia application, your system must has Media Player 9.0 or higher

version. If your system doesn’t have Media Player 9.0 or higher version, please refer to “3.3

Install Windows Media Player 9” section and install Media Player 9 to your computer.

Step 1: Run the Installation CD and click “ArcSoft TotalMedia” for ArcSoft TotalMedia software installation.

AirLive AirTV-1000U v2 User’s Manual

19

Step 2: Select the languages for this installation from the choices below, and then click

“OK” to next step.

Step 3: The Welcome wizard below will appear. Click “Next” to continue.

20

AirLive AirTV-1000U v2 User’s Manual

Step 4: Please read the following license agreement carefully. To install TotalMedia, you must accept this agreement and click “Yes”.

Step 5: Select folder where Setup will install files, and then click “Next”.

AirLive AirTV-1000U v2 User’s Manual

21

Step 6: Select Program Folder and click “Next” to continue.

Step 7: Please wait for while for setup procedure.

22

AirLive AirTV-1000U v2 User’s Manual

Step 8: After Wizard has successfully installed TotalMedia, click “Finish” to exit the Wizard.

Step 9: There will be 1 desktop icon shown after the installation:

AirLive AirTV-1000U v2 User’s Manual

23