4.8.2 Capturing Video. OvisLink AirLive AirTV-1000U v2

4.8.2 Capturing Video

This device does NOT support Video Capture function. When you click “Capture” button on the

Video section, the window below will be shown. Please click OK to leave this section.

4.9 Setup

This area lets you configure the basic settings for each module of the program:

4.9.1 General

This screen enables you to view and edit basic program settings:

AirLive AirTV-1000U v2 User’s Manual

53

(1) PRINTER: Choose your default printer.

(2) Frame Storage: Here you can set the save location and file type for captured

screenshots.

(3) VIDEO RECORDING STORAGE: Select the location on your computer where all of your recorded TV programs will be saved. You can also set the quality (HQÆ High

Quality; SP Æ Standard Play; LP Æ Long Play; EP Æ Extended Play).

54

AirLive AirTV-1000U v2 User’s Manual

(4) Display Settings: Modify the settings for how the program displays on different type of hardware.

Hardware Acceleration should be set to On for most system that meet the system requirements, but in the case of a low performance video card, turning Hardware

Acceleration Off can improve performance.

The Aspect Ratio of the monitor or television may vary (4:3 or 16:9). Set it to match your hardware, or select “Auto” to let the program choose the aspect ratio automatically.

When using a television as a display, set “Deinterlace” to Off. When using a computer monitor, set it to On.

Choose only be a fade transition when switching between screens. 3D mean there will be a zoom and fade transition. Using the 2D Display Effect can improve performance on system that are near the minimums listed in the system requirements.

(5) ABOUT TOTALMEDIA: Get information about ArcSoft TotalMedia and access tools for registering your product and searching for program updates and patches.

AirLive AirTV-1000U v2 User’s Manual

55