Toshiba RemotEye

Add to my manuals
135 Pages

advertisement

Toshiba RemotEye | Manualzz

Installation

System Compatibility

The RemotEye III supports the 1600XP Toshiba UPS system family:

Installing RemotEye III

Follow these steps to install the RemotEye III card.

1.

2.

3.

Turn the UPS off using the proper shutdown procedure as explained in the UPS manual.

Slide the RemotEye III printed circuit board into the extension option slot of the UPS.

Secure the printed circuit board using the UPS supplied screws.(See Figure 2: RemotEye III)

Figure 2: RemotEye III in 1600XP UPS

17

Making the Network Connection

Each Ethernet network is different. Therefore, the following steps should be used as an outline for connecting the

RemotEye III to a network:

1.

2.

3.

Connect one end of a Category 5 cable to the NETWORK RJ45 receptacle of RemotEye III.

Connect the other end of the Category 5 cable to a designated network switch or hub. A network administrator will allocate an available port.

Verify a network link has been established. Confirm the left-most green LED is illuminated.

18

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents