NS-Series Programmable Terminals HOST CONNECTION MANUAL

NS-Series Programmable Terminals HOST CONNECTION MANUAL

Terminology

The following terminology is used in this manual.

PT

NS Series

PLC

In this manual, indicates an NS-series Programmable Terminal.

Indicates products in the OMRON NS

[ ] [ ] Series of Programmable Terminals.

Indicates a Programmable Controller in the OMRON SYSMAC CS/CJ, C, or

CVM1/CV Series of Programmable Controllers.

CS/CJ Series Indicates Programmable Controllers in the OMRON SYSMAC CS/CJ Series of

Programmable Controllers: CS1G, CS1H, CS1G-H, CS1H-H, CJ1G, CJ1M, CJ2H,

CJ2M.

C Series

CVM1/CV Series

In this manual, “CJ1H-H” indicates the CJ1H-CPU[][]H-R and CJ1H-CPU[][]H

CPU Units. “CJ1H-H-R” is used to indicate only the CJ1H-CPU [][]H-R CPU

Units.

Indicates products in the OMRON SYSMAC C Series of Programmable Controllers:

C200HS, C200HX(-Z), C200HG(-Z), C200HE(-Z), CQM1, CQM1H, CPM1A,

CPM2A, CPM2C.

Indicates products in the OMRON SYSMAC CVM1/ CV Series of Programmable

Controllers: CV500, CV1000, CV2000, CVM1

Serial Communications Unit Indicates a Serial Communications Unit for an OMRON CS/CJ-series PLC.

Serial Communications Board Indicates a Serial Communications Board for an OMRON CS-series or CQM1H

PLC.

Communications Board Indicates a Communications Board for an OMRON C200HX/HG/HE(-Z) PLC.

CPU Unit

CX-Designer

Host

Programming Manual

Indicates a CPU Unit in the OMRON SYSMAC CS/CJ, C, or CVM1/CV Series of

Programmable Controllers.

Indicates the OMRON CX-Designer (NS-CXDC1-V

[ ] ).

Indicates the PLC, IBM PC/AT or compatible computer, or personal computer functioning as the control device and interfaced with the NS-series PT.

Indicates the NS Series Programming Manual (V073-E1-

[]).

5

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents