General Information. FLIR MV/MU Series
Below you will find brief information for maritime thermal and visible-light camera MV/MU-Series. This document provides users with detailed instructions for installing and configuring the MV/MU-Series maritime thermal and visible-light camera system, which features advanced thermal imaging for enhanced nighttime visibility and situational awareness. With its gyro-stabilization system and video tracking capabilities, the MV/MU-Series offers excellent long-range viewing and object tracking. This installation guide covers topics such as mounting options, electrical connections, and maintenance procedures, along with reference information.
Advertisement
Advertisement
Advertisement
Key features
- Pan/Tilt with 360° pan and +/- 90° tilt
- Active gyro-stabilization
- Video tracking
- Picture-in-Picture (PIP) mode
- IP66-rated camera body
- PoE standard compliant
- Digital video over Ethernet
- Multiple JCU support
- Multiple camera support
Frequently asked questions
The magnetic compass safe distance for the camera is 20 cm (7.9 in).
The magnetic compass safe distance from the JCU is 55 cm (21.7 in).
The cable gland seal is designed for use with double-shielded category 5 Ethernet cable.
For MV/MU-Series, the recommended fuse size is 10 amp.
Rinse the camera housing and optics with low pressure fresh water to remove any salt deposits and to keep it clean. If the front window of the camera gets water spots, wipe it with a clean soft cotton cloth dampened with fresh water. If the window requires further cleaning, use a soft moist cotton-based cloth with isopropyl alcohol or dish soap.