Registration (Pairing). Motorola SCOUT2360, FOCUS360, Focus 360

2.5

Registration (Pairing)

The Indoor and Outdoor Camera Units are pre-registered to your Monitor Unit.

You do not need to register it again unless the Indoor Camera Unit loses its link with the Monitor Unit.

To re-register your Indoor Camera Unit, or register a new Indoor Camera Unit, follow the procedure below:

1.

Press the

M

button of the Monitor unit and the menu bar will pop up.

2.

Press the

<

LEFT button or

>

RIGHT button until is highlighted, and the / /

3.

Press the

/ menu will pop up.

+

UP button or

-

DOWN button to select , and press the OK

4.

button to confirm.

1 / 2 / 3 / 4 will pop up, press the

+

UP button or

-

DOWN button to select the desired CAM and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching.

5.

Press the OK button to confirm.

6.

Press and hold the PAIR button underneath the Indoor Camera Unit until the Monitor unit finds the camera, beeps and the video from the camera appears.

NOTE

If a particular Indoor Camera Unit was registered previously, registering this current Indoor Camera Unit again will overwrite the previous registration.

2.6

View Video Through TV

Connect a suitable AV cable into the AV OUT socket on the side of the Monitor

Unit and into the AV input of the TV. Scroll through the AV inputs on the TV menu until the Indoor Camera Unit picture is visible.

An AV cable is an optional accessory available for purchase separately.

NOTE

The Indoor Camera Unit's power button must be turned ON and CAM preselected before connecting the AV cable. Once the AV cable is connected, the

Indoor Camera Unit's controls cannot be activated.

Getting Started 17