Alarm. Motorola SCOUT2360, FOCUS360, Focus 360

4.5

Alarm

1.

Press the

M

button and the menu bar will pop up.

2.

Press the

<

LEFT button or

>

RIGHT button until is highlighted.

3.

Press the

+

UP button or

-

DOWN button to select the alarm time

(

6h

,

4h

,

2h

). (The default setting is Alarm OFF.)

If an alarm time is selected, the Monitor unit will beep for about

45 seconds after every 6, 4 or 2 hour period, and the alarm icon will flash red.

4.6

Camera Control

4.6.1

Add (pair) a camera

1.

Press the

M

button and the menu bar will pop up.

2.

Press the

<

LEFT button or

>

RIGHT button until is highlighted, and the / /

3.

Press the

/ menu will pop up.

+

UP button or

-

DOWN button to select , and press the OK

4.

button to confirm.

1 / 2 / 3 / 4 will pop up, press the

+

UP button or

-

DOWN button to select the desired CAM, and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching.

5.

Press and hold the PAIR button underneath the Indoor Camera Unit until the Monitor unit finds the camera, beeps and the picture from the camera appears.

NOTE

A camera can only be registered to one Monitor unit at any one time.

4.6.2

View a camera

1.

Press the

M

button and the menu bar will pop up.

2.

Press the

<

LEFT button or

>

RIGHT button until is highlighted and the / /

3.

Press the

/ menu pops up.

+

UP button or

-

DOWN button to select , and press the

4.

OK button to confirm.

1 / 2 / 3 / 4 will pop up, press the

+

UP button or

-

DOWN button to select desired CAM, and press the OK button to view the picture from that camera.

Monitor Unit Menu Options 21