Contents. Fujitsu MHV2040AH - Mobile - Hard Drive, MHV2100AH, MHV2080AH, MHV2040AH, MHV2060AH

Add to My manuals
280 Pages

advertisement

Contents. Fujitsu MHV2040AH - Mobile - Hard Drive, MHV2100AH, MHV2080AH, MHV2040AH, MHV2060AH | Manualzz

Contents

CHAPTER 1 Device Overview ....................................................................... 1-1

1.1 Features ......................................................................................................... 1-2

1.1.1 Functions and performance .................................................................. 1-2

1.1.2 Adaptability......................................................................................... 1-2

1.1.3 Interface .............................................................................................. 1-3

1.2 Device Specifications ..................................................................................... 1-4

1.2.1 Specifications summary ....................................................................... 1-4

1.2.2 Model and product number .................................................................. 1-5

1.3 Power Requirements ...................................................................................... 1-6

1.4 Environmental Specifications ......................................................................... 1-8

1.5 Acoustic Noise............................................................................................... 1-9

1.6 Shock and Vibration....................................................................................... 1-9

1.7 Reliability .................................................................................................... 1-10

1.8 Error Rate .................................................................................................... 1-11

1.9 Media Defects .............................................................................................. 1-11

1.10 Load/Unload Function................................................................................ 1-11

1.11 Advanced Power Management ................................................................... 1-12

CHAPTER 2 Device Configuration................................................................ 2-1

2.1 Device Configuration ..................................................................................... 2-2

2.2 System Configuration..................................................................................... 2-3

2.2.1 ATA interface...................................................................................... 2-3

2.2.2 1 drive connection ............................................................................... 2-3

2.2.3 2 drives connection.............................................................................. 2-4

C141-E217 ix

Contents

CHAPTER 3 Installation Conditions ............................................................. 3-1

3.1 Dimensions.................................................................................................... 3-2

3.2 Mounting ....................................................................................................... 3-3

3.3 Cable Connections ......................................................................................... 3-9

3.3.1 Device connector ................................................................................. 3-9

3.3.2 Cable connector specifications........................................................... 3-10

3.3.3 Device connection ............................................................................. 3-10

3.3.4 Power supply connector (CN1) .......................................................... 3-11

3.4 Jumper Settings............................................................................................ 3-11

3.4.1 Location of setting jumpers ............................................................... 3-11

3.4.2 Factory default setting ....................................................................... 3-12

3.4.3 Master drive-slave drive setting ......................................................... 3-12

3.4.4 CSEL setting ..................................................................................... 3-13

3.4.5 Power up in standby setting ............................................................... 3-14

CHAPTER 4 Theory of Device Operation ..................................................... 4-1

4.1 Outline........................................................................................................... 4-2

4.2 Subassemblies................................................................................................ 4-2

4.2.1 Disk .................................................................................................... 4-2

4.2.2 Spindle ................................................................................................ 4-2

4.2.3 Actuator .............................................................................................. 4-2

4.2.4 Air filter .............................................................................................. 4-3

4.3 Circuit Configuration ..................................................................................... 4-3

4.4 Power-on Sequence........................................................................................ 4-6

4.5 Self-calibration .............................................................................................. 4-7

4.5.1 Self-calibration contents ...................................................................... 4-7

4.5.2 Execution timing of self-calibration..................................................... 4-8

4.5.3 Command processing during self-calibration ....................................... 4-8

4.6 Read/write Circuit.......................................................................................... 4-9 x C141-E217

Contents

4.6.1 Read/write preamplifier (PreAMP) ...................................................... 4-9

4.6.2 Write circuit ........................................................................................ 4-9

4.6.3 Read circuit ....................................................................................... 4-10

4.6.4 Digital PLL circuit............................................................................. 4-11

4.7 Servo Control............................................................................................... 4-12

4.7.1 Servo control circuit .......................................................................... 4-12

4.7.2 Data-surface servo format .................................................................. 4-15

4.7.3 Servo frame format ............................................................................ 4-17

4.7.4 Actuator motor control....................................................................... 4-18

4.7.5 Spindle motor control ........................................................................ 4-19

CHAPTER 5 Interface..................................................................................... 5-1

5.1 Physical Interface ........................................................................................... 5-2

5.1.1 Interface signals................................................................................... 5-2

5.1.2 Signal assignment on the connector ..................................................... 5-3

5.2 Logical Interface ............................................................................................ 5-6

5.2.1 I/O registers......................................................................................... 5-7

5.2.2 Command block registers .................................................................... 5-8

5.2.3 Control block registers....................................................................... 5-13

5.3 Host Commands........................................................................................... 5-14

5.3.1 Command code and parameters.......................................................... 5-14

5.3.2 Command descriptions ...................................................................... 5-18

(1) RECALIBRATE (X’10’ to X’1F’) ...............................................5-20

(2) READ SECTOR(S) (X’20’ or X’21’) ...........................................5-21

(3) WRITE SECTOR(S) (X’30’ or X’31’) .........................................5-23

(4) WRITE VERIFY (X’3C’).............................................................5-25

(5) READ VERIFY SECTOR(S) (X’40’ or X’41’) ............................5-26

(6) SEEK (X’70’ to X’7F’) ................................................................5-27

(7) EXECUTE DEVICE DIAGNOSTIC (X’90’) ...............................5-28

(8) INITIALIZE DEVICE PARAMETERS (X’91’)...........................5-30

(9) DOWNLOAD MICROCODE (X’92’)..........................................5-31

(10) STANDBY IMMEDIATE (X’94’ or X’E0’)...............................5-33

C141-E217 xi

Contents

xii

(11) IDLE IMMEDIATE (X’95’ or X’E1’) / UNLOAD

IMMEDIATE (X’95’ or X’E1’)..................................................5-34

(12) STANDBY (X’96’ or X’E2’) .....................................................5-36

(13) IDLE (X’97’ or X’E3’)...............................................................5-37

(14) CHECK POWER MODE (X’98’ or X’E5’)................................5-39

(15) SLEEP (X’99’ or X’E6’) ............................................................5-40

(16) SMART (X’B0) .........................................................................5-41

(17) DEVICE CONFIGURATION (X'B1') ........................................5-58

(18) READ MULTIPLE (X’C4’) .......................................................5-63

(19) WRITE MULTIPLE (X’C5’) .....................................................5-65

(20) SET MULTIPLE MODE (X’C6’) ..............................................5-67

(21) READ DMA (X’C8’ or X’C9’) ..................................................5-69

(22) WRITE DMA (X’CA’ or X’CB’) ...............................................5-71

(23) READ BUFFER (X’E4’)............................................................5-73

(24) FLUSH CACHE (X’E7’) ...........................................................5-74

(25) WRITE BUFFER (X’E8’) ..........................................................5-75

(26) IDENTIFY DEVICE (X’EC’) ....................................................5-76

(27) IDENTIFY DEVICE DMA (X’EE’)...........................................5-77

(28) SET FEATURES (X’EF’) ..........................................................5-89

(29) SECURITY SET PASSWORD (X’F1’) .....................................5-93

(30) SECURITY UNLOCK(X’F2’) ...................................................5-95

(31) SECURITY ERASE PREPARE (X’F3’) ....................................5-97

(32) SECURITY ERASE UNIT (X’F4’)............................................5-98

(33) SECURITY FREEZE LOCK (X’F5’).........................................5-99

(34) SECURITY DISABLE PASSWORD (X’F6’) ..........................5-101

(35) READ NATIVE MAX ADDRESS (X’F8’)..............................5-103

(36) SET MAX (X’F9’) ...................................................................5-104

(37) READ SECTOR(S) EXT (X’24’): Option (customizing).........5-110

(38) READ DMA EXT (X’25’): Option (customizing) ...................5-111

(39) READ NATIVE MAX ADDRESS EXT (X’27’): Option

(customizing) ............................................................................5-112

(40) READ MULTIPLE EXT (X’29’): Option (customizing) .........5-113

(41) READ LOG EXT (X'2F') [Optional command

(Customize)] .............................................................................5-114

(42) WRITE SECTOR(S) EXT (X’34’): Option (customizing) .......5-116

(43) WRITE DMA EXT (X’35’): Option (customizing)..................5-117

C141-E217

C141-E217

Contents

(44) SET MAX ADDRESS EXT (X’37’): Option

(customizing) ...........................................................................5-118

(45) WRITE MULTIPLE EXT (X’39’): Option (customizing)........5-120

(46) WRITE DMA FUA EXT (X’3D’): Option (customizing) ........5-121

(47) WRITE LOG EXT (X’3F’) [Optional command

(Customize)] ............................................................................5-122

(48) READ VERIFY SECTOR(S) EXT (X’42): Option

(customizing) ...........................................................................5-124

(49) WRITE MULTIPLE FUA EXT (X’CE’): Option

(customizing) ...........................................................................5-125

(50) FLUSH CACHE EXT (X’EA’): Option

(customizing) ............................................................................5-126

5.3.3 Error posting.................................................................................... 5-127

5.4 Command Protocol .................................................................................... 5-129

5.4.1 PIO Data transferring commands from device to host ...................... 5-129

5.4.2 PIO Data transferring commands from host to device ...................... 5-132

5.4.3 Commands without data transfer...................................................... 5-134

5.4.4 Other commands.............................................................................. 5-135

5.4.5 DMA data transfer commands ......................................................... 5-135

5.5 Ultra DMA Feature Set .............................................................................. 5-137

5.5.1 Overview......................................................................................... 5-137

5.5.2 Phases of operation.......................................................................... 5-138

5.5.3 Ultra DMA data in commands ......................................................... 5-138

5.5.3.1 Initiating an Ultra DMA data in burst.................................... 5-138

5.5.3.2 The data in transfer ............................................................... 5-139

5.5.3.3 Pausing an Ultra DMA data in burst ..................................... 5-139

5.5.3.4 Terminating an Ultra DMA data in burst............................... 5-140

5.5.4 Ultra DMA data out commands ....................................................... 5-143

5.5.4.1 Initiating an Ultra DMA data out burst.................................. 5-143

5.5.4.2 The data out transfer ............................................................. 5-144

5.5.4.3 Pausing an Ultra DMA data out burst.................................... 5-144

5.5.4.4 Terminating an Ultra DMA data out burst............................. 5-145

5.5.5 Ultra DMA CRC rules ..................................................................... 5-147

5.5.6 Series termination required for Ultra DMA ...................................... 5-148

5.6 Timing ....................................................................................................... 5-149 xiii

Contents

5.6.1 PIO data transfer...............................................................................5-149

5.6.2 Multiword data transfer ....................................................................5-150

5.6.3 Ultra DMA data transfer ...................................................................5-151

5.6.3.1 Initiating an Ultra DMA data in burst ....................................5-151

5.6.3.2 Ultra DMA data burst timing requirements ............................5-152

5.6.3.3 Sustained Ultra DMA data in burst ........................................5-155

5.6.3.4 Host pausing an Ultra DMA data in burst ..............................5-156

5.6.3.5 Device terminating an Ultra DMA data in burst .....................5-157

5.6.3.6 Host terminating an Ultra DMA data in burst.........................5-158

5.6.3.7 Initiating an Ultra DMA data out burst ..................................5-159

5.6.3.8 Sustained Ultra DMA data out burst ......................................5-160

5.6.3.9 Device pausing an Ultra DMA data out burst .........................5-161

5.6.3.10 Host terminating an Ultra DMA data out burst.....................5-162

5.6.3.11 Device terminating an Ultra DMA data out burst .................5-163

5.6.4 Power-on and reset ...........................................................................5-164

CHAPTER 6 Operations ................................................................................. 6-1

6.1 Device Response to the Reset......................................................................... 6-2

6.1.1 Response to power-on ......................................................................... 6-2

6.1.2 Response to hardware reset.................................................................. 6-3

6.1.3 Response to software reset................................................................... 6-5

6.1.4 Response to diagnostic command ........................................................ 6-6

6.2 Power Save .................................................................................................... 6-7

6.2.1 Power save mode................................................................................. 6-7

6.2.2 Power commands ................................................................................ 6-9

6.3 Defect Processing........................................................................................... 6-9

6.3.1 Spare area............................................................................................ 6-9

6.3.2 Alternating processing for defective sectors ....................................... 6-10

6.4 Read-ahead Cache........................................................................................ 6-12

6.4.1 DATA buffer structure....................................................................... 6-12

6.4.2 Caching operation.............................................................................. 6-13

6.4.3 Using the read segment buffer ........................................................... 6-15 xiv C141-E217

Contents

6.4.3.1 Miss-hit .................................................................................. 6-15

6.4.3.2 Sequential hit.......................................................................... 6-16

6.4.3.3 Full hit.................................................................................... 6-17

6.4.3.4 Partial hit ................................................................................ 6-18

6.5 Write Cache ................................................................................................. 6-19

6.5.1 Cache operation ................................................................................. 6-19

Glossary........................................................................................................... GL-1

Acronyms and Abbreviations ........................................................................ AB-1

Index .................................................................................................................. IN-1

C141-E217 xv

Contents

Illustrations

Figures

Figure 1.1 Negative voltage at +5 V when power is turned off........................... 1-6

Figure 1.2 Current fluctuation (Typ.) at +5 V when power is turned on ........................................................................................ 1-8

Figure 2.1 Disk drive outer view........................................................................ 2-2

Figure 2.2 1 drive system configuration............................................................. 2-3

Figure 2.3 2 drives configuration ....................................................................... 2-4

Figure 3.1 Dimensions....................................................................................... 3-2

Figure 3.2 Orientation ....................................................................................... 3-3

Figure 3.3 Mounting frame structure.................................................................. 3-4

Figure 3.4 Location of breather.......................................................................... 3-5

Figure 3.5 Surface temperature measurement points .......................................... 3-6

Figure 3.6 Service area ...................................................................................... 3-7

Figure 3.7 Handling cautions............................................................................. 3-8

Figure 3.8 Connector locations .......................................................................... 3-9

Figure 3.9 Cable connections........................................................................... 3-10

Figure 3.10 Power supply connector pins (CN1).............................................. 3-11

Figure 3.11 Jumper location ............................................................................ 3-11

Figure 3.12 Factory default setting .................................................................. 3-12

Figure 3.13 Jumper setting of master or slave drive ......................................... 3-12

Figure 3.14 CSEL setting ................................................................................ 3-13

Figure 3.15 Example (1) of cable select ........................................................... 3-13

Figure 3.16 Example (2) of cable select ........................................................... 3-14

Figure 4.1 Power supply configuration .............................................................. 4-4

Figure 4.2 Circuit configuration......................................................................... 4-5

Figure 4.3 Power-on operation sequence............................................................ 4-6

Figure 4.4 Read/write circuit block diagram ...................................................... 4-9

Figure 4.5 Frequency characteristic of programmable filter.............................. 4-10

Figure 4.6 Block diagram of servo control circuit ............................................ 4-12

Figure 4.7 Physical sector servo configuration on disk surface......................... 4-16

Figure 4.8 Servo frame format ......................................................................... 4-17

Figure 5.1 Interface signals................................................................................ 5-2 xvi C141-E217

Contents

Figure 5.2 Execution example of READ MULTIPLE command ...................... 5-63

Figure 5.3 READ SECTOR(S) COMMAND protocol ................................... 5-130

Figure 5.4 Protocol for command abort.......................................................... 5-131

Figure 5.5 WRITE SECTOR(S) command protocol....................................... 5-133

Figure 5.6 Protocol for the command execution without data transfer ....................................................................................... 5-135

Figure 5.7 Normal DMA data transfer............................................................ 5-136

Figure 5.8 Ultra DMA termination with pull-up or pull-down........................ 5-148

Figure 5.9 PIO data transfer timing................................................................ 5-149

Figure 5.10 Multiword DMA data transfer timing (mode 2)........................... 5-150

Figure 5.11 Initiating an Ultra DMA data in burst.......................................... 5-151

Figure 5.12 Sustained Ultra DMA data in burst ............................................. 5-155

Figure 5.13 Host pausing an Ultra DMA data in burst.................................... 5-156

Figure 5.14 Device terminating an Ultra DMA data in burst .......................... 5-157

Figure 5.15 Host terminating an Ultra DMA data in burst .............................. 5-158

Figure 5.16 Initiating an Ultra DMA data out burst........................................ 5-159

Figure 5.17 Sustained Ultra DMA data out burst............................................ 5-160

Figure 5.18 Device pausing an Ultra DMA data out burst .............................. 5-161

Figure 5.19 Host terminating an Ultra DMA data out burst ............................ 5-162

Figure 5.20 Device terminating an Ultra DMA data out burst ........................ 5-163

Figure 5.21 Power-on reset timing ................................................................. 5-164

Figure 6.1 Response to power-on....................................................................... 6-3

Figure 6.2 Response to hardware reset ............................................................... 6-4

Figure 6.3 Response to software reset ................................................................ 6-5

Figure 6.4 Response to diagnostic command...................................................... 6-6

Figure 6.5 Sector slip processing ..................................................................... 6-10

Figure 6.6 Automatic alternating processing .................................................... 6-11

Figure 6.7 Data buffer structure ....................................................................... 6-12

C141-E217 xvii

Contents

Tables

xviii

Table 1.1 Specifications..................................................................................... 1-4

Table 1.2 Examples of model names and product numbers ................................ 1-5

Table 1.3 Current and power dissipation............................................................ 1-7

Table 1.4 Environmental specifications ............................................................. 1-8

Table 1.5 Acoustic noise specification ............................................................... 1-9

Table 1.6 Shock and vibration specification....................................................... 1-9

Table 1.7 Advanced Power Management ......................................................... 1-13

Table 3.1 Surface temperature measurement points and standard values................................................................................................ 3-6

Table 3.2 Cable connector specifications ......................................................... 3-10

Table 5.1 Signal assignment on the interface connector ..................................... 5-3

Table 5.2 I/O registers ....................................................................................... 5-7

Table 5.3 Command code and parameters........................................................ 5-15

Table 5.4 Diagnostic code ................................................................................ 5-28

Table 5.5 Operation of DOWNLOAD MICROCODE ..................................... 5-32

Table 5.6 Example of rewriting procedure of data 512 KBytes

(40000h Bytes) of microcode........................................................... 5-32

Table 5.7 Features register values (subcommands) and functions .................... 5-42

Table 5.8 Format of device attribute value data................................................ 5-46

Table 5.9 Format of insurance failure threshold value data............................... 5-46

Table 5.10 Off-line data collection status......................................................... 5-49

Table 5.11 Self-test execution status ................................................................ 5-49

Table 5.12 Off-line data collection capability................................................... 5-50

Table 5.13 Failure prediction capability flag .................................................... 5-50

Table 5.14 Error logging capability ................................................................. 5-51

Table 5.15 Log directory data format ............................................................... 5-51

Table 5.16 Data format of SMART Summary Error Log ................................. 5-53

Table 5.17 Data format of SMART Comprehensive Error Log ........................ 5-54

Table 5.18 SMART self-test log data format.................................................... 5-55

Table 5.19 Selective self-test log data structure................................................ 5-56

Table 5.20 Selective self-test feature flags ....................................................... 5-57

Table 5.21 DEVICE CONFIGURATION IDENTIFY data structure................ 5-61

Table 5.22 Information to be read by IDENTIFY DEVICE command ....................................................................................... 5-78

Table 5.23 Features register values and settable modes .................................... 5-89

Table 5.24 Contents of SECURITY SET PASSWORD data............................ 5-93

Table 5.25 Relationship between combination of Identifier and

Security level, and operation of the lock function ........................... 5-93

C141-E217

Contents

Table 5.26 Contents of security password ...................................................... 5-101

Table 5.27 Command code and parameters ................................................... 5-127

Table 5.28 Recommended series termination for Ultra DMA ......................... 5-148

Table 5.29 Ultra DMA data burst timing requirements ................................... 5-152

Table 5.30 Ultra DMA sender and recipient timing requirements ................... 5-154

C141-E217 xix

This page is intentionally left blank.

advertisement

Key Features

  • 60 GB 2.5" 5400 RPM Ultra-ATA/100
  • HDD
  • Storage drive buffer size: 8 MB
  • 101 g

Related manuals

Frequently Answers and Questions

What is the interface type of the Fujitsu MHV2060AH?
The Fujitsu MHV2060AH utilizes an ATA interface, ensuring compatibility with a wide range of systems and motherboards.
Is the Fujitsu MHV2060AH suitable for use in NAS (Network Attached Storage) devices?
While the Fujitsu MHV2060AH can be used in NAS devices, it is primarily designed for use in laptops, desktops, and external storage applications. For optimal performance and reliability in NAS environments, consider using hard disk drives specifically designed for NAS applications.
What is the rotational speed of the Fujitsu MHV2060AH?
The rotational speed of the Fujitsu MHV2060AH is not explicitly mentioned in the provided manual.

advertisement

Table of contents