HVR-DR60 Manual

HVR-DR60 Manual

Playback the image from the camcorder

To play back video data recorded on this unit, you need to connect this unit to a playback device via an i.LINK cable.

Playback (POWER switch to VIDEO)

The playback method is as follows.

• Standard playback

• Trick playback

• Repeat playback

Trick playback

When the playback file is output to i.LINK, the file is played at triple the normal speed.

To play back at triple the normal speed

Keep pressing the . or > button during playback.

To play back in the forward direction, hold the > button down. To play back in the backward direction, hold the .

button down.

To select the playback format

Select PLAY MODE on the menu screen and select the desired setting, AUTO, HDV or DV.

For details on selecting the menu, see page 10.

– AUTO

Automatically switch the HDV/DV format signal during playback.

– HDV

Only play back the part recorded in HDV format.

– DV

Only play back the part recorded in DVCAM (DV) format.

Standard playback

In this mode, the recorded file in this unit is output to the i.LINK depending on the type of file.

To play back normally

Display the desired folder name on the LCD screen by

pressing . or >.

Play back the image by pressing the H button on this

unit.

Repeat playback

This unit can automatically repeat playback of all or one folder in this unit.

To set repeat mode

Display or on the LCD screen by pressing the

REPEAT button on this unit.

– REPEAT 1

The recorded image in the desired folder is repeatedly playback.

– ALL REPEAT

ALL REPEAT plays back all recorded images in this unit to the last folder then goes back to the first folder and repeats playback.

– OFF

When recorded images in the desired folder are played back to the end, playback stops.

OFF

REPEAT mode

REPEAT 1 REPEAT ALL Folder name

Folder-A

File name

File A-1

File A-2

File A-3

Folder-B File B-1

File B-2

File B-3

Folder-C File C-1

File C-2

File C-3

15

Useful functions in combination with HVR- V1U/V1N/V1E/V1P

Tapeless external REC control

You can start or stop recording video data on this unit by pressing the REC START/STOP button of the HVR-V1U/

V1N/V1E/V1P without a tape in the HVR-V1U/V1N/V1E/

V1P.

Set the EXT REC CTRL setting of the HVR-V1U/V1N/

V1E/V1P as follows.

• REC CTL MODE ........ SYNCHRONUS or RELAY

• STBY COMMAND ..... Desired setting

* For details, refer to the operating instructions for the external REC control of the HVR-V1U/V1N/V1E/V1P.

Set this unit as follows

• CAM LINK SEL .......... SYNCHRO

• Press the CAM LINK button to set to CAM LINK [ON].

You can record the time code of the HVR-V1U/V1N/V1E/

V1P without a tape in the HVR-V1U/V1N/V1E/V1P.

If you want to record video using the time code of the HVR- V1U/V1N/V1E/V1P, set the time code setting of the HVR- V1U/V1N/V1E/V1P as follows.

Time code value always advances.

• TC MAKE ........ PRESET

• TC RUN ........... FREE RUN

Time code value only advances during recording.

• TC MAKE ........ PRESET

• TC RUN ........... REC RUN

In combination with the time code settings of the HVR-V1U/

V1N/V1E/V1P, this unit operates as follows.

TC MAKE

REGENERATE

PRESET

TC RUN

Time code of this unit with a tape in the HVR-V1U/

V1N/V1E/V1P

Time code of this unit without a tape in the HVR-V1U/

V1N/V1E/V1P

When starting recording on a tape, video is recorded using the time code of the tape base.

If the time code of the tape base can not be read, the time code starts from

00:00:00:00.

The internal time code of this unit runs automatically.

REC RUN

When starting recording on a tape or this unit, the time code value advances from the preset time code of the HVR-

V1U/V1N/V1E/

V1P.

When starting recording on this unit, the time code value advances from the preset time code of the HVR-

V1U/V1N/V1E/

V1P.

FREE RUN

The preset time code value advances constantly and data is recorded using the data code.

The preset time code value advances constantly and data is recorded using the data code.

16

Display the operational status of this unit on the HVR-V1U/V1N/V1E/V1P LCD screen

CAMERA mode

– Indicators

• The following information can be displayed on the LCD screen of the HVR-V1U/V1N/V1E/V1P.

– Status check indicator

• The following information can be displayed on the status check indicator (CAMERA mode) of the HVR-V1U/V1N/

V1E/V1P.

1

2

3

1

HDD connecting status

This icon is displayed when connecting this unit to the

HVR-V1U/V1N/V1E/V1P.

This icon blinks when an error occurs in this unit.

2

HDD mode

The same icon as the mode icon of this unit is displayed.

HDD mode Mode icon x STANDBY

PLAY

N

M FF

REW

PLAY PAUSE

REC m u z

3

3G sensor status

The following icon is displayed depending on the status of the 3G sensor of this unit.

When drop detection is not operating: Icon is off.

During drop detection: icon blinks.

When drop detection function is OFF: icon is displayed.

REC FORMAT

Displays the recording format of this unit.

STATUS

Displays the status (recording, playback etc.)

TIME CODE

Displays the time code during recording.

FOLDER

Displays the folder name during recording.

CAM LINK

Displays the CAM LINK status of this unit.

(When CAM LINK [OFF] is set, you cannot record from the

HVR-V1U/V1N/V1E/V1P.)

HDD REMAIN

Displays the HDD remaining recording time.

REMAIN

Displays the battery level.

(When connected to an AC adaptor/charger, “AC” is displayed.)

17

VCR mode

– Indicators

• The following information can be displayed on the LCD screen of the HVR-V1U/V1N/V1E/V1P.

2 3

1

4

– Status check indicator

• The following information can be displayed on the status check indicator (VCR mode) of the HVR-V1U/V1N/V1E/

V1P.

5

1

HDD connecting status

This icon is displayed when this unit is connected to the

HVR-V1U/V1N/V1E/V1P.

This icon blinks when an error occurs in this unit.

2

HDD mode

The same icon as the mode icon of this unit is displayed.

HDD mode Mode icon

STANDBY x

N PLAY

FF M

REW

PLAY PAUSE

REC m u z

3

3G sensor status

The following icon is displayed depending on the status of the 3G sensor of this unit.

When drop detection is not operating: Icon is off.

During drop detection: icon blinks.

When drop detection function is OFF: icon is displayed.

4

Time code of the playback signal of this unit

This time code is displayed during playback of a video recorded by this unit.

5

Data code

This data code is displayed during playback of a video recorded by this unit.

PB FORMAT

Displays the playback format of this unit.

STATUS

Displays the status (recording, playback etc.)

FOLDER

Displays the folder name during playback.

REPEAT MODE

Displays the playback mode. (“1” means “repeat 1 folder,”

“ALL” means “repeat all folders.”)

HDD REMAIN

Displays the HDD remaining recording time.

REMAIN

Displays the battery level.

(When this unit is connected to an AC adaptor/charger,

“AC” is displayed.)

18

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project