Chapter 1. Overview
The POWER GXT135P Graphics PCI Adapter is a high-performance, 2-D, PCI graphics adapter that accelerates and enhances your system unit video. POWER GXT135P
Graphics PCI Adapter has no hardware switches to set. Mode selection is made through the software. Connection to the video monitor is made through a high-density
15-pin D-shell connector.
Important: Retain your proof of purchase for warranty service.
Specific Hardware Characteristics
POWER GXT135P Graphics PCI Adapter
v 16 MB SDRAM v 32-bit Universal PCI bus interface v 8-bit or 24-bit color support v One or two monitors (identical image) supported at resolutions:
– 640 x 480 at 60 Hz
– 1024 x 768 at 60 - 85 Hz
– 1280 x 1024 at 60 - 85 Hz v One monitor supported at resolutions:
– 1600 x 1200 at 75 - 85 Hz
– 2048 x 1536 at 60 - 75 Hz
Display Power Management
The POWER GXT135P Graphics PCI Adapter supports Video Electronics Standards
Association (VESA), Display Power Management Signalling (DPMS).
1
Software Requirements
The POWER GXT135P Graphics PCI Adapter is supported on AIX 4.3 with service package 4330-10, or AIX 5.1 with service package 5110-01. If support is required on another AIX release, ensure that this adapter is supported on that release prior to installation. Contact your support representative for assistance.
2
Installation and Using Guide
