FEATURES. Analog Devices AD9204, AD9258, AD9269, AD6659, AD9231, AD9650, AD9251, AD9204 Evaluation Board AD9204-40EBZ, AD9268 40 Pages
FEATURES. Analog Devices AD9204, AD9258, AD9269, AD6659, AD9231, AD9650, AD9251, AD9204 Evaluation Board AD9204-40EBZ, AD9268
Add to My manuals40 Pages
advertisement
Evaluation Board User Guide
UG-003
One Technology Way • P.O.
Box 9106 • Norwood, MA 02062-9106, U.S.A.
• Tel: 781.329.4700
• Fax: 781.461.3113
• www.analog.com
Evaluating the AD9650/AD9268/AD9258/AD9251/AD9231/AD9204/
AD9269/AD6659 Analog-to-Digital Converters
FEATURES
Full featured evaluation board for the AD9650/AD9268/
AD9258/AD9251/AD9231/AD9204/AD9269/AD6659
SPI interface for setup and control
External, on-board oscillator, or AD9517 clocking options
Balun/transformer or amplifier input drive options
LDO regulator or switching power supply options
VisualAnalog® and SPI controller software interfaces
EQUIPMENT NEEDED
Analog signal source and antialiasing filter
Sample clock source (if not using the on-board oscillator)
2 switching power supplies (6.0 V, 2.5 A),
CUI EPS060250UH-PHP-SZ, provided
PC running Windows® 98 (2nd ed.), Windows 2000,
Windows ME, or Windows XP
USB 2.0 port, recommended (USB 1.1 compatible)
AD9650, AD9268, AD9258, AD9251, AD9231, AD9204, AD9269, or AD6659 board
HSC-ADC-EVALCZ FPGA-based data capture kit
SOFTWARE NEEDED
VisualAnalog
SPI controller
DOCUMENTS NEEDED
AD9650 , AD9268 , AD9258 , AD9251 , AD9231 , AD9204,
AD9269 , or AD6659 data sheet
HSC-ADC-EVALCZ data sheet
AN-905 Application Note, VisualAnalog Converter Evaluation
Tool Version 1.0 User Manual
AN-878 Application Note, High Speed ADC SPI Control Software
AN-877 Application Note, Interfacing to High Speed ADCs via SPI
AN-835 Application Note, Understanding ADC Testing and
Evaluation
GENERAL DESCRIPTION
This document describes the AD9650, AD9268, AD9258, AD9251,
AD9231, AD9204, AD9269, and AD6659 evaluation board, which provides all of the support circuitry required to operate these parts in their various modes and configurations. The application software used to interface with the devices is also described.
The AD9650, AD9268, AD9258, AD9251, AD9231, AD9204,
AD9269, and AD6659 data sheets provide additional information and should be consulted when using the evaluation board. All documents and software tools are available at www.analog.com/fifo .
For additional information or questions, send an email to [email protected]
.
TYPICAL MEASUREMENT SETUP
Figure 1. AD9268 and AD9269 Family Evaluation Board and HSC-ADC-EVALCZ Data Capture Board
Please see the last page for an important warning and disclaimers.
Rev. A | Page 1 of 40
advertisement
Related manuals
advertisement
Table of contents
- 1 FEATURES
- 1 EQUIPMENT NEEDED
- 1 SOFTWARE NEEDED
- 1 DOCUMENTS NEEDED
- 1 GENERAL DESCRIPTION
- 1 TYPICAL MEASUREMENT SETUP
- 2 TABLE OF CONTENTS
- 2 REVISION HISTORY
- 3 EVALUATION BOARD HARDWARE
- 3 POWER SUPPLIES
- 3 INPUT SIGNALS
- 3 OUTPUT SIGNALS
- 5 DEFAULT OPERATION AND JUMPER SELECTION SETTINGS
- 5 Power Circuitry
- 5 Analog Input
- 5 AD9650 Family
- 5 AD9268 Family
- 5 AD9269 Family
- 6 VREF
- 6 RBIAS
- 6 Clock Circuitry for the AD9269 Family
- 6 Clock Circuitry for the AD9650 and the AD9268 Family
- 6 PDWN
- 6 Non-SPI Mode
- 7 Switching Power Supply
- 8 EVALUATION BOARD SOFTWARE QUICK START PROCEDURES
- 8 CONFIGURING THE BOARD
- 8 USING THE SOFTWARE FOR TESTING
- 8 Setting Up the ADC Data Capture
- 9 Setting Up the SPI Controller Software
- 10 Adjusting the Amplitude of the Input Signal
- 11 Troubleshooting Tips
- 12 EVALUATION BOARD SCHEMATICS AND ARTWORK
- 27 ORDERING INFORMATION
- 27 BILL OF MATERIALS