Nikon COOLPIX P530 Camera User Guide

Nikon COOLPIX P530 Camera User Guide

Using ViewNX 2

Install ViewNX 2 to upload, view, edit, and share photos and movies.

Your Imaging Toolbox

ViewNX 2™

Installing ViewNX 2

An Internet connection is required. For system requirements and other information, see the Nikon website for your region.

1

Download the ViewNX 2 installer.

Start the computer and download the installer from:

http://nikonimglib.com/nvnx/

2

Double-click the downloaded file.

3

Follow the on-screen instructions.

4

Exit the installer.

Click Yes (Windows) or OK (Mac).

95

Transferring Images to the Computer

1

Choose how images will be copied to the computer.

Choose one of the following methods:

• Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the USB cable. The camera automatically turns on.

To transfer images that are saved in the camera’s internal memory, remove the memory card from the camera before connecting it to the computer.

96

• SD card slot: If your computer is equipped with an SD card slot, the card can be inserted directly in the slot.

• SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card.

If a message is displayed prompting you to choose a program, select Nikon

Transfer 2.

• When using Windows 7

If the dialog shown at right is displayed, follow the steps below to select Nikon Transfer

2.

1 Under Import pictures

and videos, click Change

program. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK.

2 Double-click Import File.

If the memory card contains a large number of images, it may take a while for

Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.

B

Connecting the USB Cable

The connection may not be recognized if the camera is connected to the computer via a USB hub.

2

Transfer images to the computer.

Click Start Transfer.

Start Transfer

At default settings, all the images on the memory card will be copied to the computer.

3

Terminate the connection.

If the camera is connected to the computer, turn the camera off and disconnect the USB cable.

If you are using a card reader or card slot, choose the appropriate option in the computer operating system to eject the removable disk corresponding to the memory card and then remove the card from the card reader or card slot.

Viewing Images

Start ViewNX 2.

Images are displayed in ViewNX 2 when transfer is complete.

Consult online help for more information on using ViewNX 2.

C

Starting ViewNX 2 Manually

• Windows: Double-click the ViewNX 2 shortcut on the desktop.

• Mac: Click the ViewNX 2 icon in the Dock.

97

98

Technical Notes and Index

Caring for the Products ...................................

F2

The Camera.............................................................................................

F2

The Battery..............................................................................................

F3

Charging AC Adapter ..........................................................................

F4

Memory Cards........................................................................................

F5

Caring for the Camera .....................................

F6

Cleaning...................................................................................................

F6

Storage .....................................................................................................

F7

Troubleshooting..............................................

F8

Specifications.................................................

F16

Index ...............................................................

F22

F

1

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents