Installation. Hill-Rom CP 50 Resting Electrocardiograph, CP 150 Resting Electrocardiograph

2

Installation

Spot LXi and VSM 6000 Series

Before you install the Welch Allyn Connex CSK software do the following:

• Verify that the connectivity settings in the device software are properly configured.

For details, see the device’s directions for use.

• When using a client/server configuration, please install the server software on the database server before installing the clients.

• If using wireless communications, check the device’s settings. Verify that these settings match the access point settings.

• Verify that you have administrator rights for the PC.

• Close all programs before starting the installation.

• If “Device driver signing” appears, select either “Yes” or “Continue.”

To install the Welch Allyn Connex CSK software

1.

Insert the Connex CSK CD. This screen appears:

9

If this screen does not appear, open Connectivity Install on the CD.

10

Installation

2.

Select SPOT LXi or VSM6000. This screen appears:

Welch Allyn Connex CSK software

3.

Select SPOT LXi or VSM6000. This screen appears:

4.

Choose either Server or Client based on your configuration.

For illustrations, see

“Spot LXi and VSM 6000 Series configuration examples” on page 4.

5.

Follow the instructions on the screen.

Note

If using the removable media transfer option, make sure you transfer at least one complete test record via USB or Network.

Installation guide

To uninstall the Welch Allyn Connex CSK software

1.

Insert the Welch Allyn Connex CSK CD. This screen appears:

Installation

11

2.

Select the Uninstall button.

3.

Follow the prompts.

12

Installation Welch Allyn Connex CSK software

CP 50, CP 100, CP 150, or CP 200

Before you install the Welch Allyn Connex CSK software do the following:

• If connecting to a CardioPerfect Workstation, do the following:

• Verify that the CardioPerfect Workstation software and database have both been upgraded to version 1.6.0 or higher. If necessary, upgrade the software and database now.

• When using a stand-alone CardioPerfect Workstation system, please install the server software on the stand-alone CardioPerfect Workstation system

• When using a client/server configuration, please install the server software on the

CardioPerfect Workstation database server before installing the clients.

• Verify that the connectivity settings in the software are properly configured. For details, see the electrocardiograph directions for use.

• If using a CP 200 electrocardiograph in a wireless configuration, do the following.

• Verify that the electrocardiograph software product version is 2.4.0 or later.

• Verify that the Wireless Settings item is available on the Connectivity Settings menu. If not, a hardware upgrade is needed. Contact your Welch Allyn service representative.

• Check the electrocardiograph’s network and wireless settings. Verify that these settings match the access point settings.

For details, see the electrocardiograph directions for use.

• Verify that you have administrator rights for the CardioPerfect Workstation software and for the PC.

• Close all programs before starting the installation.

• If “Device driver signing” appears, select either “Yes” or “Continue.”

Installation guide

To install the Welch Allyn Connex CSK software

1.

Insert the Connex CSK CD. This screen appears:

Installation

13

If this screen does not appear, open Connectivity Install on the CD.

2.

Select CP50/100/150/200. This screen appears:

14

Installation

3.

Select CP50/100/150/200. This screen appears:

Welch Allyn Connex CSK software

4.

Choose either Server or Client based on your configuration.

For illustrations, see

“CP 50, CP 100, CP 150 and CP 200 configuration examples” on page 6

.

5.

Follow the instructions on the screen.

Note

If using the removable media transfer option, make sure you transfer at least one complete test record via USB or Network.

To uninstall the Welch Allyn Connex CSK software

1.

Insert the Welch Allyn Connex CSK CD. This screen appears:

2.

Select the Uninstall button.

3.

Follow the prompts.