smt-i3105 user guide

smt-i3105_combined_user_guide.qxp 4/26/2010 2:11 PM Page 14

CONFIGURATION MENU STRUCTURE

The Configuration Menu options are as follows:

1. EASY INSTALL

This option will guide you through setting up all required parameters for connecting the SMT keyset to your system.

2. PHONE INFO

1. Version Info: Provides boot rom, software, DSP, and hardware version information and date.

2. Network Info: Displays network mode, IP address of phone, network

(DNS1, DNS2), Gateway Information, Subnet Mask, MAC Address, LAN

(HUB), LAN (PC), PC Client, and Registered State.

3. MAC Address

3. NETWORK

Displays Static IP, Dynamic IP, PPPoE, NAT, 802.1x, VLAN (LAN), and VLAN (PC).

Set to Use or Not Use.

4. EXT. LOGIN

Allows the user to choose the option of permitting the phone either login/logout from idle mode or only register to the server on power up. Once the phone is placed into Extension Login mode, a display will show up to allow you to enter any valid User ID and password. This function is also referred to as hot desking (idle login). Set to Use or Not Use. Default password is 1234.

5. SERVER

1. Primary System: The main processor’s IP address.

2. System 1~3: Up to 4 server IPs can be set.

6. S/W UPGRADE

1. TFTP Server: The IP address of the TFTP server containing the IP software.

2. Upgrade: Starts the IP software upgrade process.

7. FACTORY RESET

This option resets the SMT-i3105 to factory default settings.

8. PHONE RESTART

This option reboots the SMT-i3105 phone.

smt-i3105_combined_user_guide.qxp 4/26/2010 2:11 PM Page 15

Home Page Table of Contents SMT-i3105

SECTION 3.

FREQUENTLY USED FEATURE

OPERATION

14 15