Section 4

Appendix

Feature Guide 279

4.1 Capacity of System Resources

4.1

Capacity of System Resources

4.1.1

Capacity of System Resources

System

Dialling

Category

Automatic Route Selection

(ARS)

Item

Outside (CO) Line Group

Extension Group

Absent Message

Message Waiting

Number of Characters of Name

Extension Number Digits

Call Park Zone

Conference (5-party)

Account Code

Host PBX Access Code

Station Message Detail Recording

(SMDR)

Call Log Printout for Each Extension

Intercom Call

Outgoing Message (OGM) for DISA/

UCD

Emergency Call

Quick Dialling

System Speed Dialling

Personal Speed Dialling

One-touch Dialling

Hot Line

Redial

Leading Number Table

Leading Number Exception Table

ARS Carrier

KX-TES824/KX-TEM824

8

8

6 × 16 characters

8/extn.

10

2 or 3

10

1

4 digits, 50 entries

1 or 2 digits, 8 entries

64 calls (10 000 calls with optional message expansion card)

500 calls (10 000 calls with optional message expansion card)

4

32 resources/PBX (8 resources for Direct Inward

System Access [DISA]/

Uniform Call Distribution

[UCD], 24 resources for 3-level

Automated Attendant [AA])

24 digits, 5 entries

10 digits, 10 entries

32 digits, 100 entries

24 digits, 10 entries/extn.

24 digits

32 digits

64 digits

7 digits, 80 entries

7 digits, 80 entries

4

280 Feature Guide

Category

Toll Restriction (TRS)

Call Log

Password

Item

Class of Service (COS)

Denied Code Table

Exception Code Table

Incoming Call Log

System Password

Extension Password

Voice Message Access Code

4.1 Capacity of System Resources

KX-TES824/KX-TEM824

5

11 digits, 80 entries

11 digits, 80 entries

20 entries/extn.,

300 entries/PBX

125 voice messages/Built-in

Voice Message (BV) resource

4–7 digits

4 digits

4–10 digits

Feature Guide 281

4.2 Tones/Ring Tones

4.2

Tones/Ring Tones

4.2.1

Tones/Ring Tones

Tone Patterns

Dial Tone 1

Normal

1 s

[Brazil only]

1 s

Dial Tone 2

Any of the following features is set:

1 s

• Absent Message

• Background Music

(BGM) (proprietary telephone [PT] only)

• Call Forwarding

(FWD)

• Call Pickup Deny

[Brazil only]

1 s

• Data Line Security

• Do Not Disturb

(DND)

• Extension Lock

• Hot Line (single line telephone [SLT] only)

[Czech Republic only]

1 s

• Message Waiting

(PT only)

• Remote Extension

Lock

• Timed Reminder

Dial Tone 3

• When going off-hook with an SLT that has messages waiting

• When Account Code

Entry is performed

• When answering a call from Timed

Reminder

1 s

282 Feature Guide

Dial Tone 4

A new voice message has been recorded (Built-in Voice

Message [BV]).

1 s

[Brazil only]

1 s

Dial Tone 5

1 s

The remaining voice message recording time is less than 5 minutes or 125 voice messages have been recorded (Built-in Voice

Message [BV]).

[Brazil only]

1 s

Busy Tones

1 s

[Australia/New Zealand only]

1 s

[Brazil only]

1 s

[Czech Republic only]

1 s

4.2 Tones/Ring Tones

Feature Guide 283

4.2 Tones/Ring Tones

Reorder Tones

The outside (CO) line you tried to seize is not assigned or was denied.

1 s

[Brazil only]

1 s

[Czech Republic only]

1 s

Ringback Tones

Single (3-s interval)

Double (3-s interval)

Single (5-s interval)

Double (5-s interval)

DND Tone

The dialled extension is refusing incoming calls.

Call Waiting Tone 1

[Malaysia only]

1 s

1 s

1 s

1 s

1 s

1 s

15 s

284 Feature Guide

Call Waiting Tone 2

Single

Double

1 s

1 s

Triple

1 s

Hold Alarm Tone

A call has been on hold for longer than the specified time.

Warning Tone (Outside

(CO) Line Call Limitation)

This tone is sent 15 seconds before the specified time for disconnection.

Confirmation Tone 1

The feature was set successfully, or the Extension

Lock feature was set or cancelled.

Confirmation Tone 2

The new feature setting was the same as the previous setting, or certain features were successfully performed or accessed (e.g., Call Hold,

Automatic Callback Busy).

Confirmation Tone 3

Before the following features activate:

• Retrieving a held call

• Picking up another call

• Establishing a conference call

• Paging/Answering a paging announcement

1 s

1 s

1 s

1 s

15 s

4.2 Tones/Ring Tones

Feature Guide 285

4.2 Tones/Ring Tones

Ring Tone Patterns

Ring Tone Patterns

The following ring tone patterns can be assigned to incoming call types (outside (CO) line, intercom, or doorphone calls), or are fixed for certain features (Hold Recall [outside (CO) line calls/intercom calls], Timed

Reminder, or Camp-on Recall).

Single

• Selectable: outside (CO) line calls, intercom calls, doorphone calls

• Fixed: Hold Recall

[outside (CO) line calls]

Double

• Selectable: outside (CO) line calls, intercom calls, doorphone calls

• Fixed: Hold Recall

[intercom calls]

Triple

• Selectable: outside (CO) line calls, intercom calls, doorphone calls

• Fixed: Timed Reminder

S-Double

• Selectable: doorphone calls

• Fixed: Camp-on Recall

1 s

1 s

1 s

1 s

Ring Tone Patterns Sent from the Telephone Company (New Zealand only)

The following ring tone patterns sent from the telephone company can be detected for each outside (CO) line.

Pattern 1

1 s

Pattern 2

1 s

Pattern 3

1 s

286 Feature Guide

4.2 Tones/Ring Tones

Pattern 4

1 s

Doorphone Chime Patterns

The following doorphone chime patterns can be assigned to each doorphone when doorbells and door chimes are connected to the PBX.

Pattern 1*

1 s

Pattern 2*

1 s

Pattern 3*

1 s

Pattern 4*

1 s

Pattern 5

1 s

Pattern 6

1 s

Pattern 7

1 s

Pattern 8

1 s

* Chime patterns 1 to 4 are played only one time during the doorphone ringing time.

Feature Guide 287

4.3 Revision History

4.3

Revision History

4.3.1

Version 2.0

New Contents

•

1.5.2.6 CO Busy Out

•

1.8.3 Budget Management

•

1.20.2 Call Charge Calculation

•

3.3.2 Programming Procedures

CO Busy Out [154]

CO Busy Out Check Time [155]

Call Charge Calculation—Registering Leading Numbers [161]

Call Charge Calculation—Time Table 1/2/3/4 [162/169/176/183]

Call Charge Table 1/2/3/4—Peak Flat Charge and Duration [163/170/177/184]

Call Charge Table 1/2/3/4—Peak Unit Charge and Duration [164/171/178/185]

Call Charge Table 1/2/3/4—Off Peak Flat Charge and Duration [165/172/179/186]

Call Charge Table 1/2/3/4—Off Peak Unit Charge and Duration [166/173/180/187]

Call Charge Table 1/2/3/4—Economy Flat Charge and Duration [167/174/181/188]

Call Charge Table 1/2/3/4—Economy Unit Charge and Duration [168/175/182/189]

Decimal Places [190]

Call Charge Calculation [441]

Call Charge Table Assignment [442]

LCD Display Mode [630]

Currency [921]

Call Charge Information SMDR Format 1 [922]

Call Charge Information SMDR Format 2 [923]

Secret Printing [924]

Budget Management [925]

Budget Limit Selection [926]

Changed Contents

•

1.5.2.2 Emergency Call

•

1.10.8 Outside (CO) Line Call Limitation

•

1.18.4 Display Information

•

1.20.1 Station Message Detail Recording Feature

1.20.1.1 Station Message Detail Recording (SMDR)

288 Feature Guide

1.20.1.2 Call Log Printout for Each Extension

•

2.2.4 Operator/Manager Features

•

2.3.2 PT Programming

•

3.3.1 Programming Instructions

•

4.1.1 Capacity of System Resources

•

4.2.1 Tones/Ring Tones

4.3 Revision History

Feature Guide 289

4.3 Revision History

290 Feature Guide