Projector Installation. Epson G5150NL - PowerLite Pro XGA LCD Projector, PowerLite Pro G5350NL, PowerLite Pro G5200W, PowerLite Pro G5200WNL, PowerLite Pro G5350, PowerLite Pro G5150NL, PowerLite Pro G5150


Add to my manuals
177 Pages

advertisement

Projector Installation. Epson G5150NL - PowerLite Pro XGA LCD Projector, PowerLite Pro G5350NL, PowerLite Pro G5200W, PowerLite Pro G5200WNL, PowerLite Pro G5350, PowerLite Pro G5150NL, PowerLite Pro G5150 | Manualzz

A

Projector Installation

T his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room.

A

Installation Guidelines

The projector can be installed for four different viewing setups: front projection, ceiling projection, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown:

Front projection Rear projection

Ceiling projection Rear/ceiling projection

To project from overhead, you’ll need the optional ceiling mounting

hardware (see page 12). You’ll also need to select the appropriate

Projection

setting in the projector’s Extended menu to flip the image

upside-down (see page 107).

149

If you’re mounting the projector on the ceiling and you place it above screen level, you’ll have to tilt the projector down to position the image on the screen. This causes the image to lose its square shape.

You can correct the image using the projector’s

Quick Corner

and/or

Keystone

functions, as described on page 47.

Security Features

The projector includes security features to prevent its theft when installed or used in public locations:

Security cable attachment

. You can attach a commercially available security cable as shown below to secure the projector to a table or ceiling mount.

150

Projector Installation

Security cable attachment

■ Kensington security slot.

The security slot (located above the power inlet) is compatible with the MicroSaver security systems manufactured by Kensington. You can purchase this lock from

Epson (see page 12).

■ Lens theft deterrent screw.

You can lock the lens with the supplied screw, so that the lens cannot be removed.

In addition, the projector includes several menu-operated security

features. See page 102.

Installing the Cable Cover

Install the rear cable cover to enhance the appearance of the projector and prevent any cables from being loosened or removed. To install the cover, insert its tabs into the slots as shown, then push the cover against the projector and tighten the screws at the bottom of the cover.

Projector Installation

151

To remove the cover (when connecting or disconnecting cables), loosen the screws on the bottom of the cover, pull the bottom of the cover away from the projector as shown.

note

Only install or remove the lens when necessary. If dust enters the projector, projection quality may deteriorate and/or the projector may malfunction.

Do not install or remove the lens when the projector’s lens insertion section is facing up. Dust could enter the projector.

Do not touch the lens with your hand or fingers. If fingerprints or oils are left on the surface of the lens, projection quality will deteriorate.

Installing and Removing the Lens

Installing the Lens

1. Turn off the projector and unplug the power cord.

2. Turn the focus ring clockwise until it stops moving.

152

Projector Installation

3. Make sure the white dot on the lens is facing up. Insert the lens straight into the projector, then turn clockwise until you hear it click into place.

white dot

4. If necessary, attach the lens theft deterrent screw (see page 151).

Removing the Lens

1. Turn off the projector and unplug the power cord.

2. If you’ve attached the lens theft deterrent screw, remove it (see

page 151).

3. Hold down the lens removal button and turn the lens counterclockwise until you hear it click.

4. Remove the lens by pulling it straight out.

Projector Installation

153

154

Projector Installation

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement

Table of contents