14DLV75 14-inch LCD TV/DVD COMBINATION SERVICE MANUAL

Add to my manuals
71 Pages

advertisement

14DLV75 14-inch LCD TV/DVD COMBINATION SERVICE MANUAL | Manualzz

Connections

Power source

Power connection

To DC input jack

2

1

AC adapter

(supplied)

3

AC 120V,

60Hz

AC cord

(supplied)

TO USE AC POWER

1. Connect the AC cord to the AC adapter.

2. Connect the AC adapter plug into the TV/DVD’s DC input jack.

3. Connect the AC cord into a wall outlet.

Notes:

• Make sure to insert the plug of each cord securely.

• During use the AC adapter becomes warm. This is not a malfunction.

WARNING:

• DO NOT CONNECT THIS UNIT TO THE POWER USING

ANY DEVICE OTHER THAN THE SUPPLIED AC ADAPTER

OR POWER CORD. THIS COULD CAUSE FIRE, ELECTRIC

SHOCK, OR DAMAGE.

• DO NOT USE WITH A VOLTAGE OTHER THAN THE

POWER VOLTAGE DISPLAYED. THIS COULD CAUSE

FIRE, ELECTRIC SHOCK, OR DAMAGE.

CAUTION:

• DO NOT USE THE AC ADAPTER IF IT IS COVERED BY A

CLOTH ETC., OR PRESSED INTO A NARROW AREA.

THIS RESULTS IN POOR DISSIPATION OF HEAT AND

MAY CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.

• WHEN THIS UNIT IS NOT USED FOR A LONG TIME,

(E.G., AWAY ON A TRIP) IN THE INTEREST OF SAFETY,

BE SURE TO UNPLUG IT FROM THE WALL OUTLET.

• DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS

ARE WET. THIS MAY CAUSE ELECTRIC SHOCK.

• IF YOU NEED TO REPLACE THE SUPPLIED AC

ADAPTER OR AC CORD, THE SPECIFIED AC ADAPTER

AND AC CORD MUST BE USED. CONTACT THE DEALER

THAT YOU PURCHASED THE UNIT FROM.

20

Basic setup

To memorize channels

This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/

DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE selection to the TV position. When shipped from the factory, this selection is in the CABLE position.

0–9

/ / /

CH +/–

MENU

Automatic memory tuning TV/CABLE selection

1 Press MENU in the TV mode, then press or to select option.

Press or to select the “AUTO CH MEMORY”, then press .

The TV will begin memorizing all the channels available in your area.

TV/CABLE

AUTO CH MEMORY

ADD/ DELETE

CABLE

TV/CABLE

AUTO CH MEMORY

ADD/DELETE

CABLE

/ / / / MENU

2 Press or to select “TV/CABLE”.

TV/CABLE

AUTO CH MEMORY

ADD/ DELETE

CABLE

/ / / MENU

To ADD/DELETE channels

1

Press or to select “ADD/DELETE”, then press .

/ / / / MENU

3 Press or to select “TV” or “CABLE”.

TV - VHF/UHF channels

CABLE - Cable TV channels

TV/CABLE

AUTO CH MEMORY

ADD/DELETE

CABLE

TV/CABLE

AUTO CH MEMORY

ADD/ DELETE

TV

/ / / MENU

2 Select the desired channel to be added or deleted using Direct channel selection (0–9) or

CH +/–.

/ / / / MENU

4

Press MENU repeatedly until the menu screen is cleared.

Cable TV chart

The chart below is typical of many cable system channel allocations.

3

Press or to select “ADD” or “DELETE”, whichever function you want to perform.

ADD CH 001

22

0-9 / / / / / MENU

Basic setup

Setting the language

This TV/DVD can display the on screen language in English, Spanish or French in the TV mode.

Select the language you prefer first, then proceed with the other menu options.

Setting the language

1 To turn on the TV/DVD, press POWER.

The Power indicator on the front of the main unit will light.

POWER

ENTER

/ / /

MENU

2

Press MENU, then press or to select option.

LANGUAGE/IDIOMA/LANGUE

ENGLISH

ESPAÑOL

FRANCAIS

/MENU

3 Press or to select the desired language:

English (ENGLISH), Spanish (ESPAÑOL) or

French (FRANCAIS), then press ENTER.

LANGUAGE/IDIOMA/LANGUE

ENGLISH

ESPAÑOL

FRANCAIS

/ / ENTER/MENU

4

Press MENU repeatedly until the menu screen is cleared.

Notes:

If the unit does not operate properly, or No key operation

(by the unit and/or the remote control): Static electricity, etc., may affect the TV/DVD’s operation. In such case, disconnect the AC cord once, then connect it again.

• The TV section has its own menu and also DVD section has its own menu 43 .

21

TV operation

TV operation

POWER

0–9

VOL +/–

TV operation

1

2 Adjust the volume level by pressing VOL + or –.

The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases.

3

To turn on the TV/DVD, press POWER.

The Power indicator on the front of the main unit will light.

VOLUME 32

Set the TV/CABLE selection to the appropriate position.

22

TV - VHF/UHF channels

CABLE - Cable TV channels

Auto power off

If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

4

Press direct channel selection (0–9) to select the channel.

TV mode direct channel selection

When the TV/CABLE selection is in the TV position, all channels can be instantly selected by using two buttons. (for example, to select channel

2, press “0”, then “2”.

If you press only “2”, channel selection will be delayed for a few

CH 02 seconds.) For channels 10 and above, press the 2 digits in order.

CABLE mode direct channel selection

When the TV/CABLE selection is in the CABLE position, channels can be selected as follows:

TO SELECT CABLE TV CHANNELS:

1-9: Press “0” twice, then 1-9 as needed.

10-12:

Example, to select channel 2, press

002”.

Press “0”, then the remaining 2 digits.

Example, to select channel 12, press

13-99:

012”.

Press the 2 digits in order. Example, to select channel 36, press “36”.

100-125: Press the 3 digits in order. Example, to select channel 120, press “120”.

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel will be selected in 2 seconds.

TV

VHF

2-13

UHF

14-69

CATV

VHF

2-13

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-1)

100-125

(100) (125)

01

(5A)

Note:

If a channel with no broadcast is selected, the sound will automatically be muted.

23

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals