14DLV75 14-inch LCD TV/DVD COMBINATION SERVICE MANUAL

Add to my manuals
71 Pages

advertisement

14DLV75 14-inch LCD TV/DVD COMBINATION SERVICE MANUAL | Manualzz

Basic playback

Playing a disc (continued)

To obtain a higher quality picture

Occasionally, some picture noise may appear on the TV screen while playing a

DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the SHARPNESS with the Picture control adjustment menu (see page 28).

About

DVD VCD CD

The

DVD VCD CD

icons on the heading bar show the playable discs for the function described under that heading.

: You can use this function with DVD video discs.

VCD

CD

: You can use this function with Video CDs.

: You can use this function with Audio CDs and CD-R/RW CDs.

DVD

VCD

CD

Basic playback

To pause playback (still mode)

Press PAUSE during playback.

To resume normal playback, press

PLAY.

• The sound is muted during still mode.

To stop playback

Press STOP.

POWER

TV/DVD

EJECT

VOL +/–

ENTER

/ / /

PAUSE

PLAY

STOP

To remove the disc

Press EJECT.

Remove the disc after the disc comes out.

Notes:

If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen according to the type of loaded disc. In this case, check your disc again (see pages 8 and 45).

Some discs may take a minute or so to start playback.

When you set a single-faced disc label downwards (ie. the wrong way up), “Reading” will appear on the display for 30 seconds and then “Incorrect Disc” will continue to be displayed.

Some discs may not work the resuming facility.

Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 39.

Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

Do not move the unit during playback. Doing so may damage the disc.

Use the EJECT button to unload and eject the disc. Do not push the disc while it is moving. Doing so may cause the unit to malfunction.

Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.

There may be a slight delay between you pressing the button and the function activating.

32

Advanced playback

34

Zooming/Locating desired scene

0–9

ZOOM

JUMP

CANCEL

ENTER

/ / /

RECALL

DVD

VCD

Zooming

This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame.

1 Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the

ZOOM 1 (x 1.3), 2 (x 1.5) and 3

(x 2.0).

DVD

VCD

CD

Locating desired scene

Use the title, chapter and time recorded on the DVD disc to locate the desired point to play back. In the case of VCD/CD discs, time and track are used to locate the desired point to play back.

To check the title, chapter and time, press RECALL.

1 Press JUMP during playback or stop mode.

Jump Time

Title

Chapter

/Enter/0 9/Cancel/Jump

• Time only works in resume stop mode.

1

2 Press or to select the “Time”, “Title” or

“Chapter”.

Jump Time

Title

Chapter

/Enter/0 9/Cancel/Jump

2

Press / / / to view a different part of the frame.

3

You may move the frame from the center position to UP, DOWN,

LEFT or RIGHT direction.

In the zoom mode press ZOOM repeatedly to return to a 1:1 view ( Off).

3 Press Number buttons (0–9) to change the number.

Jump Time

Title

Chapter

/Enter/0 9/Cancel/Jump

12

• If you input a wrong number, press

CANCEL.

• Refer to the package supplied with the disc to check the numbers.

Notes:

• You can select the Pause, Slow or Search playback in the zoom mode.

• Some discs may not respond to zoom feature.

4 Press ENTER. Playback starts.

• When you change the title, playback starts from Chapter 1 of the selected title.

• Some discs may not work in the above operation.

Note:

In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page 39 .

REV

PLAY

PAUSE

FWD

SKIP

/

SLOW

/

DVD

VCD

CD

Playing in fast reverse or fast forward directions

Press REV or FWD during playback.

To resume normal playback

Press PLAY.

REV: Fast reverse playback

FWD: Fast forward playback

Each time you press REV or FWD button, the playback speed changes.

Notes:

• The TV/DVD mutes sound and subtitles during reverse and forward scan of DVD video discs. However, the TV/

DVD plays sound during fast forward or fast reverse play of audio CDs.

• The playback speed may differ depending on the disc.

DVD

VCD

Playing frame by frame

Press PAUSE during still playback.

Each time you press PAUSE, the picture advances one frame.

To resume normal playback

Press PLAY.

Note:

The sound is muted during frame by frame playback.

DVD

VCD

Playing in slow-motion

To resume normal playback

Press PLAY.

Press SLOW (REVERSE) or (FORWARD) during playback.

Each time you press the button, the slow-motion speed changes.

Notes:

• The sound is muted during slow-motion playback.

• The Video CD cannot play Reverse Slow.

DVD

VCD

CD

Locating a chapter or track

Press SKIP or repeatedly to display the chapter or track number you want.

Playback starts from the selected chapter or track.

To locate succeeding chapters or tracks.

Playback starts from the beginning of the current chapter or track.

When you press twice in quick successions, playback starts from the beginning of the preceding chapter or track.

Note:

A “Prohibition” symbol may appear at the upper left of the screen. This symbol means either the feature you tried is not available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD.

33

Repeat playback/A-B Repeat playback

PLAY MODE

/ /

ENTER

PLAY

REPEAT A-B

DVD

VCD

CD

Repeat playback

1

Press PLAY MODE during playback or stop mode.

DVD

VCD

CD

A-B Repeat playback

A-B repeat playback allows you to repeat material between two selected points.

1

Press REPEAT A-B during playback.

The start point is selected.

A

2 [DVD]

Press / or ENTER once or twice to select

“Chapter” or “Title”.

The unit automatically starts repeat playback after finishing the current title or chapter.

Repeat

/Enter/Play Mode

Off

2 Press REPEAT A-B again.

The end point is selected. Playback starts at the point that you selected.

Playback stops at the end point, returns to Point A automatically, then starts again.

[Audio CD, Video CD]

Press to select “Repeat”.

Press / or ENTER once or twice to select

“Track” or “All”.

The unit automatically starts repeat playback after finishing the current track.

A B

Play Mode

Repeat

/Enter/Play Mode

Off

Off

• If you set the repeat mode during stop mode, press PLAY to start Repeat playback.

To resume normal playback

Press REPEAT A-B again.

Off ” appears on the screen.

3

Press PLAY MODE again to make the screen disappear.

To resume normal playback

Select Repeat : “Off” in step 2.

Notes:

• Some discs may not work with the repeat operation.

• In case of Video CD with PBC, repeat functions are prohibited during playback.

Notes:

• In A-B Repeat mode, subtitles near the A or B locations may not be displayed.

• You cannot set the A-B Repeat for the scenes that include multiple angles.

• A-B Repeat playback does not work when Repeat playback is activated.

• You may not be able to set A-B Repeat, during certain scenes of the DVD.

• A-B Repeat does not work with an interactive DVD, MP3/WMA/

JPEG CD.

• A-B Repeat is prohibited when PBC is on.

35

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals