RADIO OPERATIONS. Panasonic SC-AK14, SC-AK AK14

Panasonic’
CD Stereo System
Operating Instructions
Model No. SC-AK14
PACT Before connecting, operating or adjusting this product, please read these
[В instructions completely.
Plaase keep this manual for future referance.
E RQT5539-P
Before using Е
ROT5539
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These operating instructions are applicable to the following system.
System SC-AK14
Main unit SA-AK14
Speakers SB-AK18
The model number and seria! number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO
RAIN, SPLASHING, DRIPPING OR MOISTURE.
[|
Table of contents
Before using
Supplied accessories ... nennanonanonnanennveoerecconvenTe 2
Precautions .................._messesiieerieei roo neeo anne ‚ 4
Placement of speakers ..……....…..….…….…ueeuvescerricssenneuseer 5
Concerning the remote control ….........….......……...……….- 5
Battery installation seen EEE EEE EEE 5
Correct method Of USE aeree ee 5
Connections .........e.........eieniaeacanenennecorreoRe tae ranren ame 6
Basic connections (for supplied accessories) ................. 6
Optional antenna connections ......................e......0..... 7
Extemal unit connection ..........................= ene .".".. 7
Front panel controls .............e.e=eeesecracecionrer ina sens 8
Turning the demo function off......................—....... 10
ECO mode ........... ves
Auto-off fUNCLION .......…..…..………crrccceeremcasnrenmense rennes 10
Setting the time...................
Convenient fUNCtiONS ….….….…....-.…2.00rmrerscsananensensences 11
Radio operations
Presetting radio broadcasts .............es2esseaceranenonno 12
Listening to radio broadcasts …. … 13
Concerning compact discs ...............ceeercccecaranoeos 14
Listening to compact discs ...........e.s.eerscrermenanenenas 15
DC e reee ecemee 16
Repeat play ......................eeeeeereeeeeei reee 16
Random play .................cenirreeeeeesere recrean ree eee. 16
Program play ee a aena 17
To listen to special CDs and tracks
(CD Manager function) ..................... me 18
Cassette deck operations
Listening to tapes ...................«-e=1e11eererronineecere o 19
Concerning cassette tapes nee 20
Supplied accessories
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses when
asking for replacement parts.
To order accessories contact 1-800-332-5368
or web site (http:/www.panasonic.com).
<]
ACpowersupplycord. ........... iia... 1 pc.
(ВЗА0065-А)
==
Recording operations
|
CAUTION:
This equipment has been tested and found to comply with
Before recording (Deck 2 only) ....................... +... 21 the limits for a Class B digital device, pursuant to Part 15 of
Tape-to-tape recording .................. pecennannannenonedonne 21 the FCC Rules.
Recording from radio broadcasts ..............e..=e==o. 22 These limits are designed lo provide reasonable protection
Recording from compact discs ...........-.—.—.—.e...eee.. 23 against harmful interference in a residential installation. This
To record special CDs and tracks equipment generates, uses and can radiate radio frequency
(CD Manager function) 24 energy and, if not installed and used in accordance with the
cer ere ee instructions, may cause harmful interference to radio
Sound quality/sound field operations
Before using Ш
Using the built-in sound quality/
communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television
reception, which can be determined by turning the equip-
sound field settings ............-.---—......enererveoenn 25 ment off and on, the user is encouraged to try to correct the
Adding bass 25 interference by one of the following measures:
, van m men EEN a ETERNA e Reorient or relocate the receiving antenna.
Varying the sound quality with the manual sincrease the separation between the equipment and re-
equalizer LLL ELE ALELLA LAA ALLA LARES NARA 26 ceiver.
Varying the sound quality with e Connect the equipment into an outlet on a circuit different
the acoustic image (А!) equalizer .................... 26 from that to which the receiver is connected.
Timer operations
Using the timer ........ esenranaanananmaoonacconrecanenannananananeos 27 ment would void the user's authority to operate this device.
Using the play/record timer ...................+.eeeeeem e. 27
Using the sleep timer ...........................eermmeecee 29 This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This device
Reference may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
Using an external Unit ............— eee ro nee 29 may cause undesired operation.
Troubleshooting guide ......................eeceniianinenmicns 30
Maintenance ..............-.es.ecenrcorracanrinnonanoincen TON Cane. 31
Specifications ..............—...——-...esneenriree. Back Cover
Product Service .................e00resmm.enmeicacennos Back Cover С AUTI 0 N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
; The lightning flash with arrowhead symbol, within
Batteries ........... 2
|| AM loop antenna pes an equilateral triangle, is intended to alert the user
(R6, AA, UM-3)
(ВЗА0029) ................... 1 pC.
eConsult the dealer or an experienced radio/TV technician
for help.
Any unauthorized changes or modifications to this equip-
to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons,
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
НОТ5539
Before using BN
PRECAUTIONS
Before using this unit please read these operating instructions carefully.
Take special care to follow the wamings indicated on the unit itself as
well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
1. Power Source —The unit should be connected to power supply
only of the type described in the operating instructions or as
marked on the unit.
2. Polarization—If the unit is equipped with a polarized AC power
plug (a plug having one blade wider than the other), that plug will
fit into the AC outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
3. Power Cord Protection—AC power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Never take hold of the plug
or cord if your hand is wet, and always grasp the plug body
when connecting or disconnecting it.
4, Nonuse Periods—When the unit is not used, turn the power off.
When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
| Environment |
1. Outdoor Antenna Grounding—If an outside antenna is con-
nected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and
built-up static charges. Section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1990, provides information with re-
spect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the
grounding electrode. See figure below.
LL. ANTENNA LEAD
IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
SERVICE
EQUIPMENT
X GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
N POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC-NATIONAL ELECTRICAL CODE
2. Water and Moisture—Do not use this unit near water—for ex-
ample, near a bathtub, washbowl, swimming pool, or the like.
Damp basements should also be avoided.
3. Heat- The unit should be situated away from heat sources such
as radiators and the like.
It also should not be placed in temperatures less than 5°C (41°F)
or greater than 35°C (95°F).
. Condensation—Moisture may form on the lens in the following
conditions...
e immediately after a heater-has been tumed on.
sin a steamy or very humid room.
ewhen the unit is suddenly moved from a cold environment to a
warm one.
If moisture forms inside this unit, it may not operate properly. To
correct this problem, turn on the power and wait about one hour
for the moisture to evaporate.
+
Placement
m—
. Ventilation—The unit should be situated so that its location or
position does not interfere with its proper ventilation. Allow 10
cm (4”) clearance from the rear of the unit.
. Foreign Materiat—Care should be taken so that objects do not
fall into and liquids are not spilled into the unit. Do not subject
this unit to excessive smoke, dust, mechanical vibration, or shock.
Magnetism—The unit should be situated away from equipment
or devices that generate strong magnetic fields.
. Stacking—Do not place heavy objects, other than system com-
ponents, on top of the unit.
. Surface—Place the unit on a flat, level surface.
. Carts and Stands—The unit should be used only
with a cart or stand that is recommended by the
manufacturer.
The unit and cart combination should be moved
with care. Quick stops, excessive force, and un-
even surfaces may cause the unit and cart combination to over-
turn.
. Wall or Ceiling Mounting—The unit should not be mounted to
a wall or ceiling, unless specified in this operating instructions.
N
ga
Fa
oO ua
=
Maintenance
(See page 31 for details.)
Clean the cabinet, panel and controls with a soft cloth lightly moist-
ened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
ab
. Damage Requiring Service —The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects have fallen or liquid has been spilled into the unit; or
(с) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped, or the enclosure damaged.
. Servicing —The user should not attempt to service the unit
beyond that described in the operating instructions. All other
servicing should be referred to an authorized service personnel.
N
For the address of an authorized servicenter:
in the U.S.A. 1-800-211-7262 or web site
(http:/wwww.panasonic.com)
|
Listening caution
LISTENING
Selecting fine audio equipment such as the unit you've just pur-
chased is only the start of your musical enjoyment. Now it's time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries Associ-
ation's Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion—and, most importantly, without affecting your sensitive
hearing.
We recommend you to avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
e Start your volume control at a low setting.
# Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
e Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
Placement of speakers
Speakers are designed identically so that no left or right channel
orientation is necessary.
® Keep your speakers at least 10 mm ('%227 away from the system
for proper ventilation.
® These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
* To avoid damage to the speakers, do not touch the speakers
cones if you have taken the nets off.
|
Concerning the remote control
Battery installation
R6, AA, UM-3
Insert the batteries observing the correct polanties (O, ©).
Use of batteries |
Align the poles (+ and —) properly when inserting the batteries.
Do not mix old and new batteries or different types of batteries.
Do not recharge ordinary dry cell batteries.
Do not heat or disassemble the batteries. Do not allow them to
contact flame or water,
Remove the batteries if the unit is not to be used for a long time.
Do not keep together with metallic objects such as necklaces.
Do not use batteries if the covering has been peeled off.
Do not use rechargeable type batteries.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
Remote control
signal sensor
30°
Transmission
window About 7 meters in front of
the signal sensor
Operation notes
e Do not place obstacles between the remote control signal sensor
and remote control unit.
e Do not expose the remote control signal sensor to direct sunlight
or to the bright light of a fluorescent light.
e Take care to keep the remote contro! signal sensor and end of the
remote control unit free from dust.
e |f this system is installed in a rack with glass doors, the glass
doors’ thickness or color might make it necessary to use the remote
control a shorter distance from the system.
To prevent damage
e Never place heavy items on top of the unit.
¢ Do not disassemble or reconstruct the unit.
e Do not spill water or other liquids into the unit.
£
5
o
$
ea
НОТ5539
Before using Ш
RQT5539
(1 Adhesive tape
FM indoor antenna
mi
=
Bd d= op pd FF FTE OLOE FERRE 4oR rE dE dE Fd fd Fe rrr FPF 4 rR FE Ed Edd Ed Ek kl g FFF
AM loop
antenna
FEU 41 1 141 1 454 4 14 EN 41 11 1 1 4 1 1 FO FE AKA AA KA
Red (+)
Black (=)
Connections
Basic connections (for supplied accessories)
e Plug the AC power cord into a household AC outlet only after all
other connections have been made.
e To prepare the antenna wires and speaker cords, twist the vinyl
cover tip and pull off.
240 =-» ——> /
гв X
Connect the FM indoor antenna.
Tape the antenna to a wail or column, in a position where radio
signals are received with the least amount of interference.
For best reception sound quality:
An FM outdoor antenna is recommended. (See page 7.)
Connect the AM loop antenna.
After attaching the antenna, tum on the system and tune in a
broadcast station. Then, tum the antenna to the angle of best
reception and least interference.
Connect the speaker cables.
Connect each end of the speaker cables to the terminal lever of
the same color.
+ Use only the supplied speakers.
The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.
« To prevent damage to circuitry, never short-circuit positive (+)
and negative (-) speaker wires.
A
Caution
* Use the speakers only with the re-
commended system.
Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result
in the risk of fire.
Consult a qualified service person if damage
has occurred or if you experience a sudden
change in performance.
* Do not attach these speakers to walls or
ceilings.
Connect the AC power cord.
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
FM outdoor antenna
(not included)
30 mm
{13h87
15mm
(19/22)
bel Core wire
@ rar
Le J
AM outdoor antenna (not included)
| +—5-12m—
{16 — 40 #.)
AM loop antenna
(included)
Analog player (not included)
N
Rear panel of this unit
Connections
Optional antenna connections
You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.
[FM outdoor antenna EF |
Disconnect the FM indoor antenna if an FM outdoor antenna is in-
stalled.
(M) Remove a piece of the outer vinyl insulator.
(2 Twist the shield braid.
3 Expose the core wire.
An outdoor antenna should be installed by a qualified technician only.
¡AM outdoor antenna El |
Connect the outdoor antenna without removing the AM loop antenna.
Run 5 to 12m of vinyl-covered wire horizontally along a window or
other convenient location.
When the unit is not in use, disconnect the outdoor antenna to prevent
possible damage that may be caused by lightning. Never use an
outdoor antenna during an electrical storm.
. N С
External unit connection ra
e An analog player with a built-in phono equalizer can be connected.
® For details, refer to the instruction manual of the units which are to
be connected.
e When units other than those described above are to be connected,
please consult with your audio dealer.
Before using a
НОТ5539
Before using a
RQT5539
|
LLL
eo a ©
Front panel controls
| Main unit EY |
No. Name Ref. page
@ MODE button (NORMAL/ECO) (MODE) ............--...-- 10
(2) Standby/on switch (Of, POWER) 10
©
906960 ©6290 ©
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
AC supply indicator (AC IN)
This indicator lights when the unit is connected to the AC mains
supply.
Play timer/record timer button and indicator
(OPLAY/OREC) 27
Clocktimer button
(CLOCK/TIMER) 11, 27, 28
Display
Deck 1 cassette holder 19
Disc direct play, open/close buttons and indicators
(CD 1-CDs5, 4 15
CD manager button
(CD MANAGER) 18, 24
Random play button (RANDOM) 16
Disc tray
Display select/demonstration button
(-DISP/-DEMO) 10, 11
V.BASS on/off button (V.BASS) 25
Volume control (VOLUME) 13
3D A! EQ button (3D Al EQ) 26
Headphone jack (PHONES) 29
Deck 2 cassette holder 19
| Center console В
No. Name Ref. page
(9 Tape/deck select button (TAPE, DECK 1/2) ............ 19
@ CD button (CD) 18
@ Tuner/band select button (TUNER, BAND) ............. 12
2) AUX button (AUX) 29
@ Deck 1 open button (4 DECK 1 OPEN) .................. 19
@ Basic operating buttons
Functions change according to the source.
@ Tape edit button (TAPE EDIT) 21
@ Recording start/stop button (® REC/STOP)............ 22
29 Reverse mode select button (REV MODE).............. 19
@ Deck 2 open button (4 DECK 2 OPEN) .................. 19
29 Sound equalizer control (SOUND EQ)................... 25
Front panel controls
| Remote control |
Buttons such as € functions in exactly the same way as the buttons
on the main unit.
No. Name Ref. page
O Standby/on button (5) 10
@ Auto off button (AUTO OFF) 10 D)
60 Numeric buttons (>10, 1-0) 13, 16 $
69 Program button (PROGRAM) 17 >
® @2 Cancel button (CANCEL) 17 5
eT ® Tape/deck select button (TAPE) 19 a
AUTO OFF SLEEP MUTIG © CD button (CD).…...….….……-nrssennnmeneasnnennnensancnnns 18
G>————60 @ EQ select button (EQ) 25
r—0> T1 DISC O 3D Al EQ select button (3D Al) … 26
O O OO Gi ® V.BASS on/oft button (V.BASS) nn 25
+ 5 6 =10 Reverse side playback/preset channel
oO OO 4 select button (av) г 13, 19
! O 3 © Volume buttons (- VOLUME +) 13
PROGRAM CANCEL REPEAT RANDOM 65 Sleep button (SLEEP) 29
HD) © DS a D @ Muting button (MUTING) 11
TAPE CD TUNER AUX @ Disc button (DISC) 16
He + p= O 9 © Random button (RANDOM) 16
=) DSC} 39) 69 Repeat button (REPEAT) 16
VBASS | @/Y E ALA @ AUX button (AUX) .......... 29
< | Pp _P > , €) Tunermand select button (TUNER) 12
EI». a 69 Skip/search buttons (-tQ/-<<, > M1) ........ 15, 20
Play/pause/preset channel select
Panasonic button (> AA) 13, 15, 19
u | Stop button (Il) 15, 19
IE.
ROT5539
Before using a
RQOT5539
DISP/
DEMO
Disp = ” -
DEMO hb ITA TH wa CV = TT. hdi
™ bald LIE HILO qe JU AL
Turning the demo function off I}
If the clock has not been set, a demonstration of the display is shown
when the unit is switched to standby.
This function is set to on at the time of purchase.
Tum this function off to get the most from the eco mode (see below).
Press and hold [-DISP/-DEMO] until “NO DEMO” is dis-
played.
The display changes each time the button is held down.
NO DEMO (off) ++ DEMO (on)
ECO mode E
When this mode is used, the display remains blank when the unit is
switched to standby mode and the power consumed is reduced to
0.25 W from a maximum of 18 W,
The mode is set to on at the time of purchase.
cop mor 1 sender Display | Power consumption
ECO mode
off clock 18W
on blank 0.25W
AUTO OFF
[e] a
=k
To get the most from this mode, turn the demo function off or set the
clock.
Tuming ECO on and off
‚Press [OA, POWER] to turn the unit on.
Press [MODE].
The current ECO mode is displayed. Press again to change the mode.
The display changes each time the button is pressed.
NORMAL (off) <> ECO (on)
The eco mode can be tumed on if the unit is in standby but it cannot
be tumed off.
Conserving Power
The unit consumes 0.25 W even when it is tumed off with [01, POWER]
or Auto-off function and ECO mode is tumed on. To save power when
the unit is not to be used for a long time, unplug it from the household
AC outlet. Remember to reset the radio stations and any other memory
items before using the unit again.
Auto-off function
by remote control only
When CD or tape is selected as the source
To save power, the unit tums off if it is left unused for four minutes.
This function does not work if the source is tuner or AUX.
Press [AUTO OFF].
“AUTO OFF” is shown on the display.
To cancel
Press [AUTO OFF] again to clear “AUTO OFF” from the display.
For your reference
The setting is maintained even if the unit is turned off. When the unit
is tumed on again, “AUTO OFF is displayed and the unit functions as
described above,
“AUTO OFF disappears from the display if either tuner or AUX is
selected as the source but continues to function normally.
“AUTO OFF” remains displayed if CD or tape is selected as the source.
(ECC Ek bE OE FEE E+E Fyn EE F4 41H14
Al
TUNE TIME ADJA
corona
MP}
DEMO
SED amo cer SLEEP MUTING
— 3— DISC
Oo Oo Oo
4——15 EB 210
OO OOo
r a 9 0
OO OO
PROGRAM CANCEL REPEAT RANDOM
oO OOo
O oo ee
MUTING
Solos
=
—
L
—_—
=
—
-
—
m
e
TN
Setting the time
This is a 12-hour display clock.
This example in the figure shows how to set the time for 4:25 p.m..
1 Switch on the power.
Press [CLOCK/TIMER] to select “CLOCK”.
Every time you press the button:
CLOCK — OPLAY -+ OREC
t Previous display
(within 7 seconds or so)
Press [TUNE/TIME ADJ (Y) or (AY to show the
present time.
D
E
3
o
9
о
Press [CLOCK/TIMER] to finish setting the time.
The display will retum to whatever was displayed before you
set the time.
To display the time when system is ON
Press [CLOCK/TIMER] to select “CLOCK”.
At ECO mode on, to display the time when system is OFF
Press [-OISP/-DEMO]. FY
The time will be displayed for about 5 seconds and then the display
will return to whatever was previously displayed.
Convenient functions
| Switching displays EY |
Press [-DISP/-DEMO] to select the desired spectrum
analyzer.
Every time you press the button:
Normal — Peak hold — Aurora — Wiper
L ——(06.-——
To mute the volume El
by remote control only
This feature is convenient when you have a telephone call, etc.
Press [MUTING].
Press the button again to cancel.
“MUTING” goes out.
Muting can also be canceled by lowering the volume all the
way (--dB).
When the system is tumed off, the muting operation will be automatically
canceled.
ROTSS39
Radio operations a
RQT5539
CO Ci
a 4
e HO
©
=
1
— et
I hdl
Гл |
I! i -
| "Al
Y TUNETIME AQU TUNETIME ADJ A
NN
``...
ГО ля Та A à
Ut LU _
м 1
mar > MENO +7
NIET na afd NC
_ A) lt Те aoe
4 Г Preset channel
TUNED rss
MED Га
we 343
hal CAAT
#1 pu CN UN N
|
® Up to 12 stations can be set in each band with the automatic or
manual memory presetting.
e If broadcast frequencies are preset in the memory, you can easily
tune in any of these frequencies from the system or remote control
unit.
® You can preset just those stations you like. (See “Presetting only
your favorite stations” below.)
Presetting radio broadcasts
Press [TUNER, BAND] to select band.
The system will come on automatically.
Every time you press the button: FM <> AM
Press (MM, TUNE MODE] to select “MANUAL”.
Every time you press the button: MANUAL <> PRESET.
Press [TUNE/TIME ADJ (Y) or (AY until the display
shows the freguency from which you want to begin
automatic memory presetting.
Tips on tuning in radio stations
(M Hold down either arrow button until the frequency numbers
start scrolling.
(2 When near to the frequency you are looking for, press the
button repeatedly until the station is tuned in.
Press and hold [>>> >21, MEMORY] until the
frequency begins to change.
This will start presetting automatically. When finished, the radio
will tune in the last station memorized.
if auto presetting is not possible because radio signals are weak
or for some other reasons, do the following.
Presetting only your favorite stations
Preset the stations one at a time.
1. Perform step above. Then, press [M/M], MEMORY]
(MEMO” flashes) and select a station with [TUNE/TIME ADJ
(V) or (NII
2. While “MEMO” is flashing, press [M>/4, MEMORY] again and
select a preset channel with [TUNE/TIME ADJ (V) or (AY.
3. Press [>], MEMORY] to preset the station.
Memory retention
Your preset is retained in memory for about 2 weeks while the system
is unplugged.
|FM allocation setting
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts allocated in 0.1 MHz steps.
Press and hold [TUNER, BAND). After a few seconds, the display will
change to a flashing display of the current minimum FM frequency.
If you continue to hold the button down, the minimum frequency will
change. Release the button at this time.
To retum to the original frequency indication, repeat above.
After changing the “allocation” setting, the frequencies you previously
preset in the memory will be cleared.
Listening to radio broadcasts
~ i Press (TUNER, BAND] to select band.
a The unit will come on automatically.
2 Press [H, TUNE MODE] to select “PRESET” or
“MANUAL”.
(32 Every time you press the button: MANUAL <> PRESET.
PRESET: For preset stations
NO
2 оф ©) MANUAL: For non-preset stations
= = === ее © 3 Press [TUNE/TIME ADJ (V) or (A)] to select the
desired broadcast.
| “STEREO” lights when an FM stereo broadcast is being received.
J
“TUNED” lights when you precisely tune in a broadcast station.
ЕЙ | 4 Adjust the volume level.
6 ha FA E | Auto tuning |
Auto tuning is an easy way to tune in non-preset stations in the
manual mode.
[CL Fyn 4
Radio operations E
IFE PE Hold down either [TUNE/TIME ADJ (Y) or (A), and release the
= Y AE J button when the frequency starts scrolling.
| The frequency will stop scrolling automatically on the first station it
picks up.
N AR IT EA e When there is outside interference, the radio sometimes stops on
| LEUR UT) ] a certain frequency where no station is broadcasting.
Fe To stop auto tuning
Kl Press either [TUNE/TIME ADJ {VV} or (/\)] again.
If noise is excessive in the FM stereo mode [} |
Press [-+<d/-4-4, FM MODE/BP]. ( MONO” will light up.)
Sound will be produced in monaural, but this also reduces noise.
3 Press the button again to cancel. “MONO” will go out.
J Paya 1 , , a я :
| a 1 Normaily, you'll want to listen in stereo, so leave “MONO” off, This
‘ ` way, you can listen to stereo broadcasts № stereo, and monaural
ae ara rm om eww om hh hE Lh LEE EE EAE EE aE EEE EEE wr a Ee wn ad A EEA Ewe broadcasts in mono.
You can preset an FM station in monaural by following the steps
under “Presetting only your favorite stations” on page 12. After selecting
the station in step 1, select “MONO” with [ld/<td, FM MODE/BP],
then continue with steps 2 and 3.
E Notes
e |f you preset stations in memory they can be easily selected from
the remote control with [-4/Y], [№ A/A] or the numeric buttons.
I} 1. Press [TUNER] to select the band.
2. Press [-4/V] or MALA] to select the channel, or select the
required channel directly with the numeric buttons.
To select a two-digit channel:
Press [210] and then the two numbers you want within 10
seconds or so.
e Sound is momentarily interrupted if you load/unioad tapes while
listening to an AM broadcast.
—
-
—
Mn
— -—
—
1
_
i]
Jus.
pr
- =f
==!
—
VOLUME
ROTS539
Compact disc operations a
Do not touch the recorded surface.
Ic How to clean CDs
Concerning compact discs
With this system, you can only play CDs COMPACT
having this mark.
However, do not use irregular shaped CDs.
CDs of the sort can damage the unit. EY DIGITAL AUDIO
| Handling precautions El - C] |
e If you are taking the CD from a cold to a warm environment,
moisture may form on the CD. Wipe this off with a soft, dry, lint-free
cloth before using the CD.
* Do not write on the label side with à ball-point pen or other writing
instrument.
® Do not use record cleaning sprays, benzine, thinner, static elec-
tricity prevention liquids or any other solvent.
® Do not attach labels or stickers to CDs. (Do not use CDs with
exposed adhesive from tape or left over peeled off stickers.)
® Do not use scratch-proof protectors or covers other than those
specified for use with this system.
e Do not use CDs printed with label printers available on the market.
Storage precautions
Be sure to store CDs in their cases to protect them from dust,
scratches, and warping.
Do not place or store CDs in the following places
e Locations exposed to direct sunlight
® Humid or dusty locations
e Locations directly exposed to a heat vent or heating appliance
® In the glove compartment or on the rear deck of an automobile
To prevent damage |
Always observe the following points.
* Load only 1 CD on the tray. 'Q
® Load CDs as shown in figure В.
The adapter is not needed with 8cm CDs (singles).
e Set the system on a flat, level surface.
Do not set it on top of magazines, inclined surfaces, etc.
® Do not move the system while tray is opening/closing, or when
loaded.
Always unioad all CDs before moving the system.
Do not put anything except CD in tray.
e Do not use cleaning CDs or CDs which are badly warped or
cracked.
* Do not disconnect the power cord from the household AC outlet
during disc changing operation.
SU
O
COC OC DOC OC TR
N
EA CCA CESE ARES UN EU EE A CEE
Label must face upward.
FECC ECC ныне наи ники нити ним кн чин т имени На
Track number
Elapsed playing time
(Of current track number)
Bor ov om or dF kN Ed B44 EE Wd EEE EEE + EE ETE EE FEE + EEF Fano nr ddr nono я
VOLUME
Number of tracks
A
Disc number
Total playing time
42.31
56)
yy
10/11/12)
|;
hear a EI Ду Ak a
|
Always stop the changer before loading or changing CDs. You cannot
change CDs while a disc is playing.
Listening to compact discs
Press a [4] button.
The unit will come on automatically and the tray opens.
Set CD in the tray.
To continue loading CDs in the other trays
Press another [4] button to open the required tray.
The current tray closes and the selected tray automatically
opens.
Press the same [4] to close the tray.
Press [(CD 1) — (CD 5)] to play your desired disc.
(If the desired CD is indicated on the display panel, the same
operation can be accomplished by pressing Al].)
Play will start from the first track on the disc and will continue
until the last track of the final disc is played (see below).
4 Adjust the volume level.
To stop the disc play EY
Press [1].
When “ > ” appears on the display В
It indicates there are 13 or more tracks on the disc in the playing
position.
Disc indicators
The disc indicators light whenever the tray is in the playing position
whether it is loaded or not.
What is meant by “final disc”?
For example, if play starts from disc 4, disc 3 will be the “final disc”.
Order of progression:
Disc 4—5—1—2—3
One touch play
if the unit is in standby mode and a CD is loaded, press [CD] or (СО
1) - (CD 5).
The unit will come on automatically and play will start.
To pause Press [Al] dunng playback.
To resume playback, press A].
To search forward/
backward (Search)
Hold down Mt+q/-4q] (backward)
or [=] (forward) during
playback or pause mode.
To skip forward/
backward
Press [-4d/-4-8] (backward) or
[1] (forward) during
playback or pause mode.
e During random play (page 16), you cannot skip to tracks which
have already been played.
e During program play (page 17) or random play, you can search
forward or backward only within the current track.
e During program play, skipping is always in the programmed order,
whether forward or backward.
Compact disc operations a
ROT5539
Listening to compact discs
Direct access play
by remote control only
Press [CD].
Press [DISC].
(within 10 seconds or so)
Press [1] — [5] to select the disc you want.
Press the numeric button to select the desired track
number.
The CD will be played from the selected track to the last track
of the final disc (page 15).
To select a two-digit track
Press [210] and then the two numbers you want within 10 seconds or
50.
For example
Track no. 20: [>10) — [2] — (0)
Track no. 35: [210] — [3] — [5]
Repeat play
by remote control only
Press [REPEAT] before or during play. EY
All tracks on the loaded CDs are repeated.
To cancel repeat play
Press [REPEAT] once again.
Compact disc operations ne
To repeat your favorite tracks
1. Program the tracks you want (perform steps El — El on page 17).
2. Press [REPEAT] and make sure “O” is displayed.
3. Press [>> AVA]. Playback will start.
To repeat just one track
Set the 1-TRACK mode (page 186), press [REPEAT] before or during
playback, and make sure “CD” is displayed.
Random play
Press [RANDOM]. El
to Every time you press the button:
- 1-DISC ALL-DISC
L_ previous display —
To random play just one disc
RANDOM Select the CD you want to random play with [(CD 1) — (CD 5)} and
press [RANDOM] to select “1-DISC”,
To random play all the loaded CDs
Press [RANDOM] to select "ALL-DISC”,
All tracks on the CD(s) will be played in random order. Playback will
stop automatically when all tracks have been played.
To cancel random play
Press [RANDOM] to clear “RANDOM” display.
7 Note.
RAT _ na You can use random play with your program, Only the programmed
pe =! HE tracks will be played, but in random order.
RQT5539
Listening to compact discs
Program play
by remote control only
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
Press [1] - [5] to select the disc you want.
Press the numeric button to select the desired track.
Repeat steps El through El until you have pro-
grammed all the tracks you want.
Press [PALA].
Play wili start in the programmed sequence.
N
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [M] will cancel program play, but it will also erase the entire
program.
To select a two-digit track
Press [210] and then the two numbers you want.
When “CD FULL” appears EY
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
Compact disc operations E
You can do the following during program mode El
# Check program contents.
Press [1/4] or [>> Ai],
Every time you press one of the buttons, the track and program No.
are shown on the display.
® Add to the program.
Repeat steps EJ through El.
e Cancel entries.
4 5 6 >10 Specified track number
CO O Oo O From the last Press [CANCEL].
programmed track
7 8 9 0
OO OO O Program order À specified track Select the track with [-4-4/-4-d] or
only [p=], and press [CANCEL] within
№ — _— 3 seconds.
Id бо _…
a! If ' Ali tracks Press [E].
ENANA NAAA Memory retention
De ALA Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
if you tumed OFF your program with [PROGRAM], you can play it
again as explained below,
—
—
С
„о
a
will skip that track and will continue playing from the next programmed
item.
pr Indicates
| program mode
!
a I HN Гл К I
1. Press [PROGRAM].
2. Press (MAVA].
- Ti
ost |- =! If you program a track not on your CDs
The track is initially programmed, but during program play, the player
ROTS539
Compact disc operations ns
‘ча wr EE
Specified disc number
Specified track number
ROTS539
Listening to compact discs
To listen to special CDs and tracks (CD Man-
ager function)
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
You can use this function to make recordings as well.
There are 3 CDAtrack selection modes.
e For playing back 1 track only from all loaded CDs
1-Track mode (1-TRACK)
e For playing back 1 CD only from all loaded CDs
1-Disc mode (1-DISC)
e For playing back 1 track on all loaded CDs
1-Track All-Dis¢ mode (1-ALL)
1 Press [CD].
Ensure CD is stopped.
FI Press [CD MANAGER] to select the desired mode.
Every time you press the button:
1-TRACK — 1-DISC -» 1-ALL
NORMAL —
(OFF)
1-TRACK: Only one particular track is played.
1-DISC: The tracks on only one particular disc are played.
1-ALL: The same track numbers on each of the CDs are
played in succession.
(NORMAL: The original display is restored in about 3
seconds.)
3 Press {{CD 1) ~ (CD 5)] to select the disc you want.
Note
This step is not required if 1-ALL was selected in step Ed.
4 Press [d/<td] or [PPP] to select the desired
track.
This step is not required if 1-DISC was selected in step El.
E Press [Al].
The selected track will start.
To stop play
Press (MM.
When playback ends
“NORMAL” will appear on the display for about 3 seconds, then the
CD MANAGER function will tum OFF automatically.
During play in the 1-ALL mode:
e It is not possible to skip back to a CD whose track has already
been played.
e |f a CD does not have the designated track number, it is skipped
and play continues.
e You can use the CD Manager function together with repeat play.
e CD Manager function will be canceled when you press the
[RANDOM] button,
EOS ESAS ASES ESAS EA CESE ESSE ESCASA EPA
Front side
{Eu u 4 EE ET FE CANAFE 6 4 4 4 EU ARR 8
[CC C4 4 EEE FO ниве
Tape direction —
AA CAOS ESA AAA
DON
Fe
0
}
pe FA ЛАТ 4A]
VOLUME boo LEA A
7
>
ЦР
MN us
TAPE TE NL _ Ш
+1 LL T4 1 I 0
=>
(an
Deck in use
Listening to tapes
Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
NORMAL POSITION/TYPE | /
HIGH POSITION/TYPE II /
METAL POSITIONTYPE IV /
You can use either deck 1 or deck 2 for tape playback.
Press [TAPE, DECK 1/2].
The unit will come on automatically.
If the unit was off and a cassette was loaded, play will start
automatically (One touch play function).
2 Press [2 DECK 1 OPEN] or [2 DECK 2 OPEN] and
insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
3 Press [REV MODE] to select the reverse mode.
Every time you press the button:
- 9-77
& |
: One side is played, then playback stops automatically.
3 : Both sides (front side — reverse side) are played one
time each, then playback stops automatically.
Both sides are played 8 times each, then playback stops
automatically.
titi
СЭ:
4 Press [-4] or [>] to start playback.
[+]: The forward side (front side) will play.
[4]: The reverse side will play.
5 Adjust the volume level.
To stop tape playback
Press [BB].
To change the deck to be used FY
Press [TAPE, DECK 1/2] to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select “C2”. Both tapes will be
played 8 times each.
Playback is momentarily interrupted while playing back tapes, if you
open the other deck.
Cassette deck operations Ш
ROT5539
Cassette deck operations a
RQT5539
Fell {tll
FM MODE/BP
/ B How to take up tape slack
Side A
Tab for side “B” Tab for side “A”
To re-record
Normal position tape Hi-position tape
Y
Y
Detection hole
Listening to tapes
|To fast-forward or rewind the tape EY |
Press [-4-d/-4-d] or [>> MP1] in the stop mode.
Tape direction To rewind To fast-forward
“>” [44/4] [i i]
“<? [Pe] [44/4]
To find the beginning of a program
(TPS: Tape Program Sensor) A
TPS finds the beginning of a track and resumes play from there. Each
prass increases the number of tracks skipped, up to a maximum of 9.
Press [4/4] or (>> >P1] during play.
CET
The TPS function searches for silent parts of about 4 seconds in
length which are normally found between tunes. As a result, it may not
function property in the following cases:
e With short silent parts
e When noise occurs between tunes
e With silent parts found within tunes
Concerning cassette tapes
| Selection of cassette tapes
Tapes can get caught on the capstans. Use caution with the following
types of tapes.
Cassette tapes exceeding 100 minutes
Tapes are made of a thin film material. Do not repeatedly advance
and stop the tape, fast-forward it or rewind it.
Endless-tapes
For this unit, it is recommended to use tapes which are appropriate to
the auto reverse mechanism.
Always read the instructions provided with your tapes.
| Tape slack El |
Tape slack may cause the tape to break.
| Erasure prevention |
Use a screwdriver or similar object to break out the tab.
To re-record on a protected cassette
Cover the hole with adhesive tape.
Do not cover the detection hole an hi-position tapes.
Storage precautions
Do not place or store tapes in the following places:
e In high temperature (35°C or higher) or high humidity (80% or
higher) areas
e In a strong magnetic field (near a speaker, on top of a TV, etc.)
This can erase a recording.
® Locations exposed to direct sunlight
Recording part
Leader tape (no recording
can be made)
BA EASTER CESA ROA
DETENTE EEE EC RON
EEE CESA CCAA CA AA OA CCA ACERO,
Tape direction of the tape you are recording
onto |
Before recording (Deck 2 only) |
| Types of tapes which can be recorded correctly |
The unit automatically identifies the type of tape.
NORMAL POSITION TYPE | Y
HIGH POSITION TYPE || /
METAL POSITION/TYPE IV X
Metal position tapes can be used, but the unit will not be able to
record or erase them correctly.
To record from the beginning of the tape I} |
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
|How volume, sound quality/field affect recording |
The tape you are recording is not affected whatsoever by changes in
volume, sound quality/field,
To erase a recorded sound |
Press [TAPE, DECK 1/2].
Insert the recorded tape into deck 2.
Press [REV MODE] to select reverse mode.
Press [@ REC/STOP].
® ‘You cannot open deck 1 while recording.
® You cannot fast-forward or rewind one deck while recording with
the other.
> ею A
Tape-to-tape recording
The recording level will be recorded as it is on the tape being played
back.
1 Press [TAPE, DECK 1/2].
2 Press [4 OPEN] on both decks and insert the tapes.
For playback: Into deck 1
For recording: Into deck 2
Close the holders by hand.
Tape direction is automatically set to “>”.
3 Press [REV MODE] to select the reverse mode.
Every time you press the button:
- II
HR |
= :One side is recorded, then recording stops
automatically.
=>», :Both sides (front side — reverse side) are recorded,
then recording stops automatically.
4 Press [TAPE EDIT] to start recording.
e |f you selected “(C72)” in step El, the direction will
automatically change to “ 2D ” when recording starts.
To stop recording
Press [MM].
Both decks will stop.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [-4] and immediately thereafter [ll]. The tape direction will
be shown as “<I”.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
Recording operations Ш
ROT5539
Recording operations a
RQT5539
EEE EA
жит т ни
Tape direction
[CCA CC
TUNED
STEREO
paid
FM MODEÆP
E
td
Recording from radio broadcasts
Press [4 DECK 2 OPEN] and insert the tape.
Close the holder by hand.
Tape direction is automatically set to “>”.
Press [REV MODE] to select the reverse mode.
Every time you press the button:
- CI
bo Y
- : One side is recorded, then recording stops auto-
matically.
=>,C.> : Both sides (front side — reverse side) are recorded,
then recording stops automatically.
Select a radio station. Perform steps EN through El
on page 13.
Press [9 REC/STOP] to start recording.
If you selected “ C7> ” in step Ed, the direction will automatically
change to “ 23” when recording starts.
To stop recording
Press [9 REC/STOP] again.
Recording can also be stopped by pressing (№).
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [-] and immediately thereafter [ll]. The tape direction will
be shown as “<J”.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To cut an unnecessary part while recording
1. Press [6 REC/STOP] during the unnecessary part. The cassette
deck will go into the stop mode.
2. Press (e REC/STOP] to resume recording again. Recording will
continue in the same direction as before.
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
To reduce noise while AM recording (Beat proof
function) EY
Press [-4/-4-d4, FM MODE/BP]) while recording.
Each time you press the button, “BP1” and "BP2” will be displayed
alternately.
Select the position where there is less noise.
Tape direction
Fd + 1 # 4% & ® 1 1 01 % 1 FT 0 0 + FLL FY FELL FFT EOL AFI LY EFI® ILA FL ELA 41 1 LE #1 141 1 1 4 & 1 1&1
ок жанна тт ит FRILL AXEL ELT FLL IYI ELIF LEAL % FILE IEE A 4k 1 LAF 1 & kok 8 4 kd 1 &
Cap
(= f MA 3
эй =] ! М
4
li Fa LATA с)
A i IRC
EEE EEES OOOO OA
_
Recording from compact discs
Press [4 DECK 2 OPEN], and insert the tape.
Close the holder by hand.
Tape direction is automatically set to “>”.
Press [REV MODE] to select the reverse mode.
Every time you press the button:
- IC
& |
- : One side is recorded, then recording stops auto-
matically.
=>,C) : Both sides (front side — reverse side) are
recorded, then recording stops automatically.
Press [CD].
Insert CD in the tray.
(Perform steps El - El on page 15).
Press [(CD 1) ~ (CD 5)] to select the disc you want.
Pressing [MB] will stop playback.
Press [96 REC/STOP] to start recording.
If you selected “.C > ” in step Éd, the direction will
automatically change to * 75 ” when recording starts.
® The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final
disc (page 15).
e The tape deck stops automatically when the CD is finished.
To stop recording
e To add a 4 second silent interval before stopping
Press [B]. The CD will stop automatically too.
* To stop recording without a silent interval
Press [9 REC/STOP]. The CD will stop automatically too.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [4] and immediately thereafter [ll]. The tape direction will
be shown as “I”.
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks |
1. After step El, program the track you want (perform steps H-{3 on
page 17).
2. Press (9 REC/STOP] to start recording.
Recording operations a
ROT5539
Recording operations Е
RQT5539
me (OC,
Reverse sids bel] 8 | 7 || 6 || 15 Il
The interrupted track is re-recorded in its entirety on the
reverse side.
Recording from compact discs
To record special CDs and tracks
(CD Manager function)
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
e While recording, if a track is cut off in the middle at the end of the front
side, it is re-recorded from the beginning, on the reverse side. E
e At the end of the reverse side recording stops and the current
track will be interrupted.
Before recording
Prepare the tape you want to use, Perform step El on page 23.
1 Press [CD].
2 Press [CD MANAGER] to select the desired mode.
Every time you press the button:
1-TRACK — 1-DISC — 1-ALL
t NORMAL —
(OFF)
1-TRACK: Only one particular track is recorded.
1-DISC: The tracks on only one particular disc are recorded.
1-ALL: The same track numbers on each of the CDs are
recorded in succession,
(NORMAL: The original display is restored in about 3 seconds.)
3 Press (CD 1) ~ (CD 5)] to select the disc you want.
DE
This step is not required if 1-ALL was selected in step Ed.
3 Press [l4d/<d] or [PP] to select the desired
track.
This step is not required if 1-DISC was selected in step Я.
5 Press [© REC/STOP] to start recording.
To stop recording
* To adda 4 second silent interval before stopping
Press (MN). The CD will stop automatically too.
* Tostop recording without a silent interval
Press [9 REC/STOP], The CD will stop automatically too.
¡sound field settings E
A | ¡Using the built-in sound quality/ |
Dial [SOUND EQ] to select the sound quality or sound field.
When it is tumed clockwise, the settings are selected in the following
sequence.
(D HEAVY (sound quality)
Select this when playing rock or other kinds of music that sound
better with an added punch.
)
BESS 2) CLEAR (sound quality)
os Select this for jazz or other kinds of music for which clarity in the
5 oe treble range is desired.
Fo =a Ss (3) SOFT (sound quality)
S885 Select this when listening to background music.
ORES @ DISCO (sound field)
me Select this to produce sound with the same kind of lengthy
Panasonic reverberations heard at a disco.
(5) LIVE (sound field)
Select this to make vocals more alive.
(6) HALL (sound field)
Select this to add an expansiveness to the sound to produce the
atmosphere of a great concert hall.
(7) MANUAL (see page 26)
AI-EQ (see page 26)
The original display is restored on the display panel in about 5 seconds.
To release the equalizer
Dial [SOUND EQ] to display “FLAT”.
When using the remote control to perform the operations
described above
Press [EQ].
Each time this button is pressed, the setting is changed in the sequence
ъ x Ren described above.
‘RAN WY xo
1) 8
AT JA All recordings are performed at the flat setting even if an alternative
a ñ + sound quality/sound field setting has been selected.
Adding bass B
Press [V.BASS].
Press the button again to cancel.
V.BASS” goes out.
y, BASS
You cannot record V.BASS effect, but you can use it for playback
sound.
V.BASS
FLAT
чин’ са’ та чб че Cl“ ar rh Чай ma
Sound quality/sound field operations a
RQT5539
Varying the sound quality with the
manual equalizer
/ co X_ Cen >) Dial [SOUND EQ] to display “MANUAL”.
| When it is tumed clockwise, the settings are selected in the
following sequence.
(3) HEAVY +—
(2) CLEAR
E SOFT
@ DISCO
® LIVE
© HALL
e
(7) MANUAL
© ® FLAT —
2 Adjust the sound quality.
M « > direction: For selecting the range of the sound to
Lococo @
— be adjusted
Characteristics of each sound range
Under 100 Hz: Super woofer range
Around 330 Hz: Bass to midrange
Around 1 kHz: Midrange
Around 3.3 kHz: Midrange to treble
Above 10 kHz: Treble
@ | Tdirection: For adjusting the level (7 steps)
When the level is in the center, the dot flashes rapidly.
Repeat steps (7 and @ to set the desired sound quality.
The original display is restored on the display panel in about 5
wur on _
PS seconds.
y- CTR TT To release the equalizer
i ds x vu Dial [SOUND EQ] to display “FLAT”.
d= pm ERD JM
FIA
¡an ||| VES tm a
1111218548 NU e The sound quality setting is stored automatically. It is recalled
when “MANUAL” is next selected.
e All recordings are performed at the flat setting even If an alternative
sound quality setting has been selected.
Varying the sound quality with the
acoustic image (Al) equalizer
The Al equalizer uses the SOFT, SHARP, HEAVY and LIGHT sound
1 quality coordinates to achieve subtle sound quality settings with ease.
3D AIEQ
Press [3D Al EQ] to adjust the surround level.
Every time you press the button:
3DAI1 — 3DAI2
larga (Light of]
DE 115 10 014 #6 CC EEE EEE 0 UNE
2 Adjust the sound quality.
(M) « — direction: SOFT-SHARP setting
@ | Tdirection: LIGHT-HEAVY setting
Repeat steps (1) and @ to set the desired sound quality.
per) CMI AL
' ‘Ww VON The original display is restored on the display panel in about 5
„ее BELLE seconds
Il A -- 29 12:7) :
|<. wars UA
SOUND EQ ) MB 401
(7) ‚aan RER To release the equalizer
Sound quality/sound field operations a
Dial (SOUND EQ] to display “FLAT”.
e The sound quality setting is stored automatically. It is recalled
when “A-EC” is next selected.
e Ali recordings are performed at the flat setting even if an alternative
sound quality setting has been selected.
ROT5539
tn) се
i Ca
Mm _ Ся Го. и TRI thd UTA Ty {
MU Pur eo E ZALLA LN ZA LA
Li E E
= | >A
* TUNETIME ADJ ADJA
A)
ten] | (=) |
i
4, — » N — Am — I
TER Ir Ex TT EE СМ О {1
I UNA FUIT Aa LONA LIT
A — NE / x
@ CLOCH
TIMER
@PLAY
REC
ro gy em er ER
Indicator
Using the timer |
Using the play/record timer
The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
® Tum the unit on and set the clock (= page 11).
e For the play timer, prepare the music source you want to listen
to; tape, CD, radio or aux, and set the volume.
* For the record timer, check the cassette’'s erasure prevention
tabs (=> page 20: (3), insert the tape in deck 2, select the reverse
mode (=> page 22) and tune to the radio station (= page 13) or
select the aux source (=» page 29).
Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
CLOCK — OPLAY > OREC
E Previous display -—
OPLAY :to set the play timer
OREC : to set the record timer
| Setting the start and finish times
2 (Within 8 seconds or so)
(1) Press [TUNE/TIME ADJ (V) or (A)] to select the
starting time.
(2) Press [CLOCK/TIMER].
3 (1) Press [TUNE/TIME ADJ (V) or (A)] to select the
finishing time.
(2) Press [CLOCK/TIMER].
The start and finish times are now set.
| Turning the timer on
4 Press [OPLAY/OREC].
Every time you press the button:
OPLAY — OREC
L_ (OFF) +—
OPLAY : to tum the play timer on
OREC :to tum the record timer on
El Press (ОЛ, POWER] to turn the unit off.
The unit must be off for the timers to operate.
® For play timer
The timer play will start at the preset time with volume
increasing gradually up to the volume level you preset.
® For record timer
The record timer comes on about 30 seconds eartier than
the set time,
To cancel the timer
Press [OPLAY/OREC] and check [DPLAY/OREC] indicator lights off.
To change the settings (when unit is on)
* To change the play/record times
Do steps El, El, El and El.
* To change the source or volume
1. Press (OPLAY/OREC] to tum the [DPLAY/OREC] indicator off.
2. Make changes to the source or volume.
3. Do steps E to HI.
(Continued on next page)
Timer operations Ш
НОТ5539
Timer operations a
RQTS539
Using the timer
Using the play/record timer
To check settings
While the unit is on and the “DPLAY” (or “DREC” indicator is on,
press [CLOCK/TIMER] so “OPLAY” (or “OREC”) appears on the
display.
Two seconds after “OPLAY” (or “OREC”) appear, the settings are
displayed in the following order:
e For play timer e For record timer
@® Play start time (1) Recording start time
@ Play finish time @ Recording finish time
(3) Play source @ Recording source
@ Playback volume
You can check the settings even when the system is OFF by pressing
[CLOCK/TIMER].
To enjoy the desired source after the timer setting is completed
The volume level (for play timer) and music source are stored in the
timer memory and the timer will start in these preset conditions.
However, the Disc numbers and reverse mode do not get stored in
the timer memory.
1. After step Ed, start playing the desired source.
2. Reset the Disc numbers and reverse mode if you have changed
any of them, confirn that a Disc or cassette is inserted, then press
[P/ 1, POWER] to put the unit on standby.
Turning the timer ON/OFF
One of the timers is on when the [OPLAY/OREC] indicator is lit.
When the unit is on (or off and in NORMAL mods) you can confirm
which is on by checking which indicator is on the display.
When the unit is off and in ECO mode, press [CLOCK/TIMER]. The
display will then show which timer is on and the settings that have
been made (see above).
Te change the timer, press (OPLAY/DREC].
Each time the button is pressed the setting changes as follows.
OPLAY — OREC
L_ (OFF) +—
Notes
® |f you switch the system to the standby mode while the play/record
timer is functioning, the OFF time setting will not be activated.
e If AUX is selected as the source, when the timer comes ON, the
system will tum ON and will engage “AUX” as the source. If you
want to playback or record from a connected component, set the
component’s timer to the same time, (Ses the instruction manual
that came with the component.)
SLEEP
|
—
—
|
_—
] 1
4
-
|
TUE,
sf
^_^ COC DCC Deo N
Dh С
AUX O
J |
| сб. O ©
@RECSTOP
Headphones
(not included)
Using the timer |
Using the sleep timer
This timer tums your system OFF at the set time (Max. 2 hours,
settable at 30-minute interval). It lets you fall asleep listening to music.
by remote control only
Switch on the power.
The figure shows how to set the system to standby mode after 30
minutes.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
Г SLEEP 30 — SLEEP 60 — SLEEP 90 — SLEEP 120 — SLEEP OFF 7
The system is tumed off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time:
(only while system is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
® The sleep timer turns OFF automatically the moment you attempt
to edit-record a CD using CD Manager function.
* The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
Using an external unit El
| Listening to an external source |
(See page 7 for extemal unit connection)
1. Press [AUX].
The system will come on automatically.
2. Start playback from the extemal source. (For details, refer to the
owners manual of the equipment.)
Recording from an external source |
1. Follow steps EHH on page 22.
2. Press [AUX].
3. Press [9 REC/STOP] (recording starts).
4. Start playback from the external source. (For details, refer to the
owner's manual of the equipment.)
| Listening with headphones |
Reduce the volume level, and connect the headphones.
Plug type: 3.5mm ('/8") stereo
Avoid listening for prolonged periods of time to prevent hearing
damage.
Reference Ша Ш Timer operations
RQT5539
| Troubleshooting guide
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a
minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of
Authorized Service Centers {enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.
For detailed Instructions, contact an authorized servicenter 1-800-211-7262 or web site (http//’www.panasonic.com).
Problem Probable cause(s) Suggested remedy Reference
page(s)
Problems common to all systems
ECO mode is on but the DEMO mode is on. Turn DEMO mode off. 10
display planei still lights up.
The location of the various The (+) and (-) connections to one of the Connect the speaker cords correctly.
musical instruments is not speakers are reversed. 6
well defined.
The left and right sounds The left and right connections to the Connect the speaker cords correctly. 6
are reversed. speaker are reversed.
When listening to the The left and right connections to the Connect the external unit's cord correctly.
external unit, the left and extemal unit are reversed. 7
right sounds are reversed.
There is no sound when a The (+) and (-) wire of the speaker Switch the system to the standby mode,
source is being played. cords are shorted. and reconnect the speaker cords so that they 6
are not shorted. Then switch on the power.
“ERROR” message appears Incorrect operation has been done. Operate the unit correctly by following the
on the display. ‚ operating instructions.
“——1—— appears on the * You plugged the power cord in for the Set the time.
display. first time. 11
* There was a power failure recently.
“F61” appears on the Check if the speaker cords have shorted. If they are not shorted then there is a power
display. supply problem. Consult your dealer for
assistance.
While listening to FM broadcasts
There is a “rushing noise” The transmitting station is a long distance If you are using an indoor antenna, change
during a stereo broadcast away. to an outdoor antenna.
which is not audible during
a monaural broadcast.
You hear excessive noise The installation location and orientation of 7
during a stereo broadcast, the antenna are unsuitable,
and occasionally the sound
disappears.
The stereo indicator The transmitting station is a long distance
(“STEREO”) flickers and away.
does not light completely. The power of the TV set or VCR is ON. Try switching off the TV set or VCR.
The sound during a stereo There is a building or mountain nearby. Use a high-grade outdoor antenna, and
broadcast is highly distorted. install it in a good location, height, and 7
a orientation for reception.
© While listening to AM broadcasts
E You hear an unusual beat You are using the system at the same time Switch off the TV set, or use the system
© sound. you are playing a TV set. further away from it.
$ You hear a low-frequency The antenna wire is near the power cord. Separate the antenna wire from the power
hum. cord.
НОТ5539
_
Suggested remedy
Problem Probable cause(s) Reference
page(s)
When there is a television set nearby
The picture on the TV The location and orientation of the antenna If you are using an indoor antenna, change 7
disappears or stripes appear | are incorrect. to an outdoor antenna.
on the screen. The wiring at the back of the system is Separate the antenna wire of the TV set
unsuitable. from the system.
While using the cassette deck
Sound is low, intermittent, Heads are dirty. Clean the heads. See below
poor quality, noisy, scratchy,
or unsteady.
The deck does not enter the | The erase-prevention tabs are removed Attach tape to cover the space left by 20
recording mode. from the cassette, removal of the erase-prevention tabs.
While listening to compact discs
The display does not show The disc is upside down. Set the disc with the label facing upward. 15
the correct Indication. Disc The disc is dirty. Wipe the disc with a soft cloth. 14
play does not start when The disc is scratched. Replace the disc with a new one.
you press the play button. The disc is badly warped.
The disc is a nonstandard one. Replace the disc with a different one. 14
There is condensation inside the CD Wait for 60 minutes before using the CD
changer. player.
A certain music passage The disc is dirty. Wipe the disc with a soft cloth. 14
can't be played correctly.
“TAKE OUT/DISC” appears There was a power failure or the power cord| 1. Press [DA, POWER] to switch on the
on the display. was disconnected from the household AC power. The tray will open.
outlet 2. If there is a CD in the tray, remove it,
* during disc changing operation or then press [4] of [CD 1) to close
» when the disc tray is opened. the tray. The system will restore normal
operation.
While using the remote control
The system cannot be The batteries are installed in the reverse Re-insert the batteries in the correct 5
operated with the remote polarity. polarity.
trol.
con The batteries are run-down. Replace the batteries with new batteries. 5
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.
* Never use alcohol, paint thinner or benzine to clean this unit.
+ Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
| | For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and
recording.
Use a cleaning tape (not included).
Reference a
RQTS539
Specifications
AMPLIFIER SECTION
RMS power output
1% Total harmonic distortion
1 kHz, both channels driven
45 W per channel (662)
1% Total harmonic distortion
70 Hz-16 kHz, both channels driven
40 W per channel (6£2)
Input sensitivity
AUX 250 mV
Input Impedance
AUX 13.9kQ2
FM TUNER SECTION
Frequency range
87.9 — 107.9 MHz (200 kHz steps)
87.5 — 108.0 MHz (100 kHz steps)
Sensitivity 2.5 (IHF)
S/N 26dB 2.2pV
Antenna terminal(s) 7542 (unbalanced)
AM TUNER SECTION
Frequency range
AM 520 — 1710kHz (10kHz steps)
Sensitivity
AM
S/N 20 dB (at 1000 kHz) 560 HV/m
CASSETTE DECK SECTION
Track system 4 track, 2 channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100kHz
Erasing system AC erase 100 kHz
Tape speed 4.8cm/s
Frequency response
(+3 dB, 6 dB at DECK OUT)
NORMAL (TYPE 1) 35 Hz — 14 kHz
HIGH (TYPE 11) 35 Hz — 14 kHz
S/N 50dB (A weighted)
Wow and flutter 0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
CD SECTION
Sampling frequency 44.1 kHz
Decoding ; 16 bit linear
Beam source/wave length
Semiconductor laser/780 nm
Number of channels Stereo
Frequency response
20 Hz-20 kHz (+1, -2 dB)
Wow and flutter Below measurable limit
Digital filter 815
D/A converter MASH (1 bit DAC)
SPEAKER SECTION
Type 2 way speaker system
Speaker(s)
Woofer 12cm (4°°/42") cone type
Tweeter 5 em (23%) cone type
Impedance 6Q
Input power 100 W (Music)
Output sound pressure level
85 dB/W (1.0 m)
Cross over frequency 5 kHz
Frequency range 45Hz-22 kHz (-16 dB)
55 Hz-20 kHz (—10 dB)
Dimensions (WxHxD) 210 x 330 x 257 mm
(8%. x 13 x 10%")
Mass 3.0 kg (6.6 Ib.)
GENERAL
Power supply AC 120 Y, 60 Hz
Power consumption 145W
Dimensions (WxHxD) 270 x 330 x 310mm
(10%” x 137 x 1277
Mass 6.8 kg (14.96 Ib.)
Power consumption in standby mode
Eco mode on 0.25 W
Eco mode off 18W
Notes:
1. Specifications are subject to change with-
out notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
Product service
Do not attempt to remove the cover(s) or
repair the unit yourself.
Refer servicing to qualified personnel only.
Product information ||
For product service, product information or
assistance with product operation, refer to the
servicenter directory.
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com
©2000 Matsushita Electric Industrial Co., Ltd.
Printed in Singapore
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ava. 65 de Infantería, Km. 9.5
San Gabriel Industria! Park, Carolina,
Puerto Rico 00985
RQT5539-P
PO200GLO
">