Additional Information. Sony BDV-E780W, BDVE780W, BDV-E980W

Add to My manuals
84 Pages

advertisement

Additional Information. Sony BDV-E780W, BDVE780W, BDV-E980W | Manualzz

66

GB

Additional Information

Precautions

On safety

• To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the system, or place the system near water, such as near a bathtub or shower room. Should any solid object or liquid fall into the cabinet, unplug the system and have it checked by qualified personnel before operating it any further.

• Do not touch the AC power cord (mains lead) with wet hands. Doing so may cause an electric shock.

On power sources

• Unplug the unit from the wall outlet (mains) if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord.

On placement

• Place the system in a location with adequate ventilation to prevent heat build-up in the system.

• At high volume, over long periods of time, the cabinet becomes hot to the touch. This is not a malfunction.

However, touching the cabinet should be avoided. Do not place the system in a confined space where ventilation is poor as this may cause overheating.

• Do not block the ventilation slots by putting anything on the system. The system is equipped with a high power amplifier. If the ventilation slots are blocked, the system can overheat and malfunction.

• Do not place the system on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots.

• Do not install the system in a confined space, such as a bookshelf or similar unit.

• Do not install the system near heat sources such as radiators, air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.

• Do not install the system in an inclined position. It is designed to be operated in a horizontal position only.

• Keep the system and discs away from components with strong magnets, such as microwave ovens, or large loudspeakers.

• Do not place heavy objects on the system.

• Do not place metal objects in front of the front panel.

They may limit reception of radio waves.

• Do not place the system in a place where medical equipment is in use. It may cause a malfunction of medical equipment.

• If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless LAN function.

On operation

• If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the unit. Should this occur, the system may not operate properly. In this case, remove the disc and leave the system turned on for about half an hour until the moisture evaporates.

• When you move the system, take out any disc. If you do not, the disc may be damaged.

• If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

On adjusting volume

• Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is suddenly played.

On cleaning

• Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

If you have any questions or problems concerning your system, please consult your nearest Sony dealer.

On cleaning discs, disc/lens cleaners

• Do not use cleaning discs or disc/lens cleaners

(including wet or spray types). These may cause the apparatus to malfunction.

On replacement of parts

• In the events that this system is repaired, repaired parts may be collected for reuse or recycling purposes.

On your TV’s color

• If the speakers should cause the TV screen to have color irregularity, turn off the TV then turn it on after

15 to 30 minutes. If color irregularity should persist, place the speakers further away from the TV set.

IMPORTANT NOTICE

Caution: This system is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen.

Projection televisions are especially susceptible to this.

On moving the system

• Before moving the system, make sure that there is no disc inserted, and remove the AC power cord (mains lead) from the wall outlet (mains).

Notes about the Discs

On handling discs

• To keep the disc clean, handle the disc by its edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

• After playing, store the disc in its case.

On cleaning

• Before playing, clean the disc with a cleaning cloth.

Wipe the disc from the center out.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs.

This system can only play a standard circular disc. Using neither standard nor circular discs

(e.g., card, heart, or star shape) may cause a malfunction.

Do not use a disc that has a commercially available accessory attached, such as a label or ring.

67

GB

68

GB

Troubleshooting

If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

Note that if service personnel changes some parts during repair, these parts may be retained.

In the event of a problem with the wireless sound function, have a Sony dealer check the entire system together (main unit and surround amplifier).

General

Symptom

The power is not turned on.

Problems and solutions

• Check that the AC power cord (mains lead) is connected securely.

The remote does not function.

• The distance between the remote and the unit is too far.

• The batteries in the remote are weak.

The disc tray does not open and you cannot remove the disc even after you press Z.

• Try the following: 1 Press and hold N and Z on the unit for more than 5 seconds to open the disc tray. 2 Remove the disc. 3 Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.

The system does not work normally.

• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes.

Messages

Symptom

“PROTECTOR” and “PUSH

PWR” appear alternately in the front panel display.

Problems and solutions

[A new software version is available. Please go to the

“Setup” section of the menu and select “Network Update” to perform the update.] appears on the TV screen.

• See [Network Update] (page 60) to update the system to a newer software

version.

Press "/1 to turn off the system, and check the following items after

“STANDBY” disappears.

• Are the + and – speaker cords short-circuited?

• Are you using only the specified speakers?

• Is anything blocking the ventilation holes of the system?

• After checking the above items and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.

“LOCKED” appears in the front panel display.

• Set the child lock function to off (page 50).

• Contact your nearest Sony dealer or local authorized Sony service facility.

“DEMO LOCK” appears in the front panel display.

“Exxxx” appears in the front panel display.

appears without any messages on the entire TV screen.

• Contact your nearest Sony dealer or local authorized Sony service facility and give the error code.

• Contact your nearest Sony dealer or local authorized Sony service facility.

Picture

Symptom

There is no picture.

There is no picture when you make an HDMI cable connection.

3D images from the HDMI (IN

1) or HDMI (IN 2) jack do not appear on the TV screen.

Problems and solutions

• Check the output method on your system (page 22).

• The unit is connected to an input device that is not HDCP (High-bandwidth

Digital Content Protection) compliant (“HDMI” on the front panel does not

light up) (page 22).

• Depending on the TV or video component, 3D images may not appear.

There is no picture or output resolution is low when you make a component video cable connection. (Non-European/ non-Saudi Arabian models only.)

• When playing a BD-ROM, a high-resolution image may not be output because of copy protection limitations. We recommend to make a HDMI connection

(page 22).

No picture appears when the video output resolution selected in [Output Video Format] is incorrect.

• Press and hold N and VOL – on the unit for more than 5 seconds to reset the video output resolution to the lowest resolution.

The dark area of the picture is too dark/the bright area is too bright or unnatural.

• Set [Picture Quality Mode] to [Standard] (default) (page 40).

The picture is not output correctly.

Picture noise appears.

• Check the [Output Video Format] settings in [Screen Settings] (page 61).

• If the analog and digital signals are output at the same time, set [BD/DVD-

ROM 1080/24p Output] in [Screen Settings] to [Off] (page 61).

• For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in

[Screen Settings] (page 61).

• Clean the disc.

• If the picture output from your system goes through your VCR to get to your

TV, the copy-protection signal applied to some BD/DVD programs could affect picture quality. If you still experience problems even when you connect your unit directly to your TV, try connecting your unit to the other input jacks.

An image is not displayed on the entire TV screen.

• Check the setting of [TV Type] in [Screen Settings](page 60).

• The aspect ratio on the disc is fixed.

Color irregularity occurs on the

TV screen.

• If the speakers are used with a CRT-based TV or projector, install the speakers at least 0.3 meters from the TV set.

• If the color irregularity persists, turn off the TV set once, then turn it on after 15 to 30 minutes.

• Make sure that no magnetic object (magnetic latch on a TV stand, health care device, toy, etc.) is placed near the speakers.

There is no picture after playing a video/photo file on the iPod/ iPhone.

• Select the input on your TV for this system.

69

GB

70

GB

Sound

Symptom

There is no sound.

Problems and solutions

• The speaker cord is not connected securely.

• Check the speaker settings (page 49).

The Super Audio CD sound of a component that is connected to the HDMI (IN 1) or HDMI (IN

2) jack is not output.

• HDMI (IN 1) and HDMI (IN 2) does not accept an audio format that contains copy protection. Connect the analog audio output of the component to the

AUDIO (AUDIO IN L/R) jacks of the unit.

There is no sound from the TV via the HDMI (OUT) jack when using the Audio Return Channel function.

• Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]

(page 63). Also, set [Audio Return Channel] in [HDMI Settings] of [System

Settings] to [Auto] (page 63).

• Make sure that your TV is compatible with the Audio Return Channel function.

• Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function.

The system does not output sound correctly when connected to a set-top box.

• Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]

(page 63).

Severe hum or noise is heard.

• Move your TV away from the audio components.

• Clean the disc.

The sound loses stereo effect when you play a CD.

• Select stereo sound by pressing

(page 43).

The sound comes from the center speaker only.

• Depending on the disc, the sound may come from the center speaker only.

No sound or only a very lowlevel sound is heard from the surround speakers.

• Check the speaker connections and settings (pages 20, 49).

• Check the surround setting (page 31).

• Depending on the source, the effect of the surround speakers may be less noticeable.

• A 2 channel source is being played.

Distortion occurs in the sound of a connected component.

• Reduce the input level for the connected component by setting [Attenuate -

AUDIO] (page 61).

Wireless sound

Symptom

Wireless transmission is not activated or there is no sound from the surround speakers.

Noise is heard from surround speakers or sound from the surround speakers skips.

Problems and solutions

Check the status of the LINK/STANDBY indicator on the surround amplifier.

• Turns off.

– Check that the AC power cord (mains lead) of the surround amplifier is connected securely.

– Turn the surround amplifier on by pressing "/1 on the surround amplifier.

• Flashes green quickly.

– 1 Press "/1 on the surround amplifier. 2 Insert the wireless transceiver into the surround amplifier correctly. 3 Press "/1 on the surround amplifier.

• Flashes red.

– Press "/1 to turn off the surround amplifier, and check the following items.

1 Are the + and – speaker cords short-circuited?

2

Is anything blocking the ventilation holes of the surround amplifier?

After checking the above items and fixing any problems, turn on the surround amplifier. If the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.

• Flashes green or orange slowly or turns red.

– Make sure that the wireless transceiver is inserted correctly into the main unit.

– Make the [Secure Link] setting again (page 54).

– Sound transmission is poor. Move the surround amplifier so that the LINK/

STANDBY indicator turns green or orange.

– Move the system away from other wireless devices.

– Avoid using any other wireless devices.

• Turns green or orange.

– Check the speaker connections and settings.

• Wireless transmission is unstable. Change the [RF Channel] setting in

[Wireless Sound Connection] (page 55).

• Install the unit and surround amplifier closer to each other.

• Do not install the unit and surround amplifier in a closed rack, on a metal rack, or under a table.

Tuner

Symptom

Radio stations cannot be tuned in.

Problems and solutions

• Check that the antenna (aerial) is connected securely. Adjust the antenna

(aerial) or connect an external antenna (aerial) if necessary.

• The signal strength of the stations is too weak (when tuning in with automatic tuning). Use manual tuning.

71

GB

72

GB

Playback

Symptom

The disc does not play.

Problems and solutions

• The region code on the BD/DVD does not match the system.

• Moisture has condensed inside the unit and may cause damage to the lenses.

Remove the disc and leave the unit turned on for about half an hour.

• The system cannot play a recorded disc that is not correctly finalized (page 74).

File names are not displayed correctly.

• The system can only display ISO 8859-1-compliant character formats. Other character formats may be displayed differently.

• Depending on the writing software used, the input characters may be displayed differently.

• Resume play has been selected. Press OPTIONS and select [Play from start], then press .

A disc does not start playing from the beginning.

Playback does not start from the resume point where you last stopped playing.

• The resume point may be cleared from memory depending on the disc when

– you open the disc tray.

– you disconnect the USB device.

– you play other content.

– you turn off the unit.

The language for the soundtrack/ subtitle or angles cannot be changed.

• Try using the BD’s or DVD’s menu.

• Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or

DVD being played.

Bonus contents or other data that are contained in a BD-ROM cannot be played.

• Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and

reconnect the USB device (page 35). 4 Turn the system on. 5 Insert the BD-

ROM with BONUSVIEW/BD-LIVE.

USB device

Symptom

The USB device is not recognized.

Problems and solutions

• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB device. 3 Turn the system on.

• Make sure that the USB device is securely connected to the (USB) port.

• Check if the USB device or a cable is damaged.

• Check if the USB device is on.

• If the USB device is connected via a USB hub, disconnect it and connect the

USB device directly to the unit.

BRAVIA Internet Video

Symptom Problems and solutions

The picture/sound is poor/certain programs display with a loss of detail, especially during fastmotion or dark scenes.

• Picture/sound quality may be poor depending on Internet content providers.

• Picture/sound quality may be improved by changing the connection speed.

Sony recommends a connection speed of at least 2.5 Mbps for standarddefinition video and 10 Mbps for high-definition video.

• Not all videos contain sound.

The picture is small.

• Press X to zoom in.

“BRAVIA” Sync ([Control for HDMI])

Symptom

The [Control for HDMI] function does not work

(“BRAVIA” Sync).

Problems and solutions

• Check that [Control for HDMI] is set to [On] (page 63).

• If you change the HDMI connection, turn the system off and on again.

• If power failure occurs, set [Control for HDMI] to [Off], then set [Control for

HDMI] to [On] (page 63).

• Check the following and refer to the operating instructions supplied with the component.

– the connected component is compatible with the [Control for HDMI] function.

– the connected component’s setting for the [Control for HDMI] function is correct.

Network connection

Symptom Problems and solutions

The system cannot connect to the network.

• Check the network connection (page 27) and the network settings (page 64).

Built-in/USB wireless LAN connection

Symptom

You cannot connect your PC to the Internet after [Wi-Fi

Protected Setup (WPS)] is performed.

You cannot connect the system to your wireless LAN router.

Problems and solutions

• The wireless settings of the router may change automatically if you use the

Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly.

• Check if the wireless LAN router is on.

• Depending on the usage environment, including the wall material, radio wave reception conditions, or obstacles between the system and the wireless LAN router, the possible communication distance may be shortened. Move the system and the wireless LAN router closer to each other.

• Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt the communication. Move the unit away from such devices, or turn off such devices.

The desired wireless router is not detected even if [Scan] is performed.

• Press RETURN to return to the previous screen, and try [Scan] again. If the desired wireless router is still not detected, press RETURN to select [Manual registration].

The system cannot connect to the network or the network connection is unstable.

• The distance between the unit and the wireless LAN router is too far (page 27).

73

GB

74

GB

Playable Discs

Blu-ray Disc

DVD

3)

CD

3)

BD-ROM

1)

BD-R/BD-RE

2)

DVD-ROM

DVD-R/DVD-RW

DVD+R/DVD+RW

CD-DA (Music CD)

CD-ROM

CD-R/CD-RW

Super Audio CD

1)

Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. Also, the audio output differs depending on the source, connected output jack, and selected audio settings.

2)

BD-RE: Ver.2.1

BD-R: Ver.1.1, 1.2, 1.3 including organic pigment type BD-R (LTH type)

BD-Rs recorded on a PC cannot be played if postscripts are recordable.

3)

A CD or DVD disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions supplied with the recording device.

Discs that cannot be played

• BDs with cartridge

• BDXLs

• DVD-RAMs

• HD DVDs

• DVD Audio discs

• PHOTO CDs

• Data part of CD-Extras

• Super VCDs

• Audio material side on DualDiscs

Notes on discs

This product is designed to play back discs that conform to the Compact Disc (CD) standard.

DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard.

Therefore, these discs may not be compatible with this product.

Note on playback operations of a

BD/DVD

Some playback operations of a BD/DVD may be intentionally set by software producers. Since this system plays a BD/DVD according to the disc contents the software producers designed, some playback features may not be available.

Note about double-layer BDs/

DVDs

The playback picture and sound may be momentarily interrupted when the layers switch.

Region code (BD-ROM/DVD

VIDEO only)

Your system has a region code printed on the rear of the unit and will only play a BD-ROM/

DVD VIDEO (playback only) labeled with identical region codes or

ALL

.

Playable Types of Files

Video

1)

File format

MPEG-1 Video/PS

2)5)

MPEG-2 Video/PS,

TS

2)6)

Xvid

MPEG4/AVC

2)5)

WMV9

2)5)

AVCHD

Extensions

“.mpg,” “.mpeg,” “.m2ts,”

“.mts”

“.avi”

“.mkv,” “.mp4,” “.m4v,”

“.m2ts,” “.mts”

“.wmv,” “.asf”

3)5)

Music

File format

MP3 (MPEG-1 Audio

Layer III)

AAC

2)4)5)

WMA9 Standard

2)4)

LPCM

Extensions

“.mp3”

“.m4a”

“.wma”

“.wav”

Photo

1)

File format

JPEG

GIF

PNG

Extensions

“.jpg,” “.jpeg”

“.gif”

“.png”

1)

The system does not play these files via the renderer function.

2)

The system does not play files encoded with DRM.

3)

The system plays AVCHD-format files that are recorded via a digital video camera, etc. To watch

AVCHD-format files, the disc with AVCHD-format files on it must be finalized.

4)

The system does not play files encoded with

Lossless, etc.

5)

The system does not play these files via the DLNA function.

6)

The system plays SD resolution only via the DLNA function.

• Some files may not play depending on the file format, the file encoding, the recording condition, or DLNA server condition.

• Some files edited on a PC may not play.

• The system can recognize the following files or folders in BDs, DVDs, CDs and USB devices:

– up to folders in the 3rd tree

– up to 500 files in a single tree

• The system can recognize the following files or folders stored in the DLNA server:

– up to folders in the 18th tree

– up to 999 files in a single tree

• Some USB devices may not work with this system.

• The system can recognize Mass Storage Class (MSC) devices (such as flash memory or an HDD), Still

Image Capture Devices (SICDs), and 101-key keyboards (front (USB) port only).

• To avoid data corruption or damage to USB memory or other devices, turn the system off before connecting or removing USB memory or other devices.

• The system may not play high bit rate video files from a DATA CD smoothly. It is recommended to play high bit rate video files using a DATA DVD.

75

GB

76

GB

Supported Audio Formats

Audio formats supported by this system are as follows.

Function

Format

LPCM 2ch LPCM 5.1ch

LPCM 7.1ch

Dolby Digital Dolby

TrueHD,

Dolby Digital

Plus

DTS

“BD/DVD”

“HDMI1”

“HDMI2”

“SAT/CABLE”

“TV”

(DIGITAL IN)

a a a a: Supported format.

–: Unsupported format.

a

– a a a a

– a a a

DTS-ES

Discrete 6.1,

DTS-ES

Matrix 6.1,

DTS96/24

a

DTS-HD

High

Resolution

Audio

a

DTS-HD

Master

Audio

a

– – –

• HDMI (IN 1) and HDMI (IN 2) do not input sound in the case of an audio format that contains copy protections such as Super Audio CD or DVD-Audio.

• For the LPCM 2ch format, the supported sampling frequency of the digital signal is up to 96 kHz when using the

“HDMI1” or “HDMI2” function, and 48 kHz when using the “TV” or “SAT/CABLE” function.

Specifications

Amplifier Section

POWER OUTPUT (rated)

Front L/Front R: 108 W + 108 W (at 3 ohms,

1 kHz, 1% THD)

POWER OUTPUT (reference)

Front L/Front R/Center: 167 W (per channel at

3 ohms, 1 kHz)

165 W (at 3 ohms, 80 Hz) Subwoofer:

Inputs (Analog)

AUDIO (AUDIO IN) Sensitivity: 450/250 mV

Inputs (Digital)

SAT/CABLE (COAXIAL)

TV (Audio Return Channel/OPTICAL)

Supported formats: LPCM

2CH (up to 48 kHz), Dolby

Digital, DTS

HDMI (IN 1)/HDMI (IN 2)

Supported formats: LPCM

2CH (up to 96 kHz), Dolby

Digital, DTS

Video Section

Outputs VIDEO: 1 Vp-p 75 ohms

COMPONENT*:

Y: 1 Vp-p 75 ohms

P

B

, P

R

: 0.7 Vp-p

75 ohms

* For non-European/non-Saudi Arabian models only.

HDMI Section

Connector Type A (19pin)

BD/DVD/Super Audio CD/CD System

Signal format system

U.S. and Canada models: NTSC

Other models: NTSC/PAL

USB Section

(USB) port: Type A (For connecting

USB memory, memory card reader, digital still camera, and digital video camera)

LAN Section

LAN (100) terminal 100BASE-TX Terminal

Wireless LAN Section

Standards Compliance IEEE 802.11 b/g/n

Frequency and Channel 2.4 GHz - 2.4835 GHz

[CH1 -13]

FM Tuner Section

System PLL quartz-locked digital synthesizer

Tuning range

U.S. and Canada models: 87.5 MHz - 108.0 MHz

(100 kHz step)

Other models: 87.5 MHz - 108.0 MHz (50 kHz step)

Antenna (aerial) FM wire antenna (aerial)

Antenna (aerial) terminals 75 ohms, unbalanced

Speakers

Front (SS-TSB107) for BDV-E780W

Dimensions (approx.) 96 mm × 330 mm × 72 mm

(w/h/d) (wall-mounted part)

106 mm × 325 mm × 107

Mass (approx.) mm (w/h/d) (whole speaker)

0.8 kg (wall-mounted part)

0.8 kg (whole speaker)

Front (SS-TSB108) for BDV-E980W

Dimensions (approx.) 96 mm × 775 mm × 72 mm

(w/h/d) (wall-mounted part)

275 mm × 1,205 mm × 245

Mass (approx.) mm (w/h/d) (whole speaker)

1.4 kg (wall-mounted part)

2.9 kg (whole speaker)

Surround (SS-TSB106) for BDV-E780W

Dimensions (approx.)

Mass (approx.)

96 mm × 245 mm × 96 mm

(w/h/d)

0.6 kg

Surround (SS-TSB109) for BDV-E980W

Dimensions (approx.) 96 mm × 775 mm × 72 mm

(w/h/d) (wall-mounted part)

275 mm × 1,205 mm × 245 mm (w/h/d) (whole

Mass (approx.) speaker)

1.3 kg (wall-mounted part)

2.8 kg (whole speaker)

Center (SS-CTB103)

Dimensions (approx.)

Mass (approx.)

315 mm × 59 mm × 53 mm

(w/h/d)

0.4 kg

Subwoofer (SS-WSB105)

Dimensions (approx.)

Mass (approx.)

415 mm × 340 mm × 215 mm (w/h/d)

7.8 kg

77

GB

78

GB

General

Power requirements

Power consumption

Dimensions (approx.)

Mass (approx.)

220 V - 240 V AC,

50/60 Hz

On: 130 W

Standby: 0.3 W (at the

Power Saving mode)

430 mm × 75 mm × 320 mm (w/h/d) incl. projecting parts

430 mm × 75 mm × 333 mm (w/h/d) (with the wireless transceiver inserted)

4.1 kg

Surround amplifier (TA-SA300WR)

Amplifier Section

POWER OUTPUT (reference)

Surround L/Surround R 167 W (per channel at 3

Rated impedance:

Power requirements ohms, 1 kHz)

3 - 16

Ω

220 V - 240 V AC,

50/60 Hz

Power consumption On: 50 W

Standby power consumption

0.5 W (standby mode)

Dimensions (approx.)

0.18 W (turned off)

206 mm × 60 mm × 236

Mass (approx.) mm (w/h/d) with the wireless transceiver inserted

1.3 kg

Wireless transceiver (EZW-RT50)

Communication system Wireless sound

Specification version 1.0

Frequency band

Modulation method

5.725 GHz - 5.875 GHz

DSSS

Power requirements

Dimensions (approx.)

Mass (approx.)

DC 3.3 V, 300 mA

30 mm × 9 mm × 60 mm

(w/h/d)

10 g

Design and specifications are subject to change without notice.

• Standby power consumption 0.3W (main unit),

0.18W (surround amplifier).

• Over 85% power efficiency of amplifier block is achieved with the full digital amplifier, S-Master.

Language Code List

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Parental Control/Area Code List

79

GB

80

GB

Index

Numerics

3D 34

3D Output Setting 60

A

A/V SYNC 42

Attenuate - AUDIO 61

Audio 62

Audio DRC 61

Audio Output 62

Audio Return Channel 64

Audio Settings 61

Auto Calibration 48, 62

Auto Display 64

Auto Standby 64

B

BD Audio MIX Setting 61

BD Hybrid Disc Playback

Layer 62

BD Internet Connection 62

BD Parental Control 63

BD/DVD Menu 62

BD/DVD Viewing Settings 62

BD/DVD-ROM 1080/24p

Output 61

BD-LIVE 34

BONUSVIEW 34

BRAVIA Internet Video 38

BRAVIA Sync 47

C

CD 74

Child Lock 50

Cinema Conversion Mode 61

Connection Server Settings 64

Control for HDMI 47, 63

D

D.C.A.C. (Digital Cinema Auto

Calibration) 48

DLNA 38, 64

Dolby Digital 43

DTS 43

DVD 74

DVD Aspect Ratio 60

DVD Parental Control 63

E

Easy Setup 29, 65

F

FM Mode 45

Front panel 10

Front panel display 11

G

Gracenote Settings 64

H

HDMI

YCbCr/RGB (HDMI) 61

HDMI Deep Colour Output 61

I

Illumination/Display 63

Initialize Personal Information

65

Internet content 38

Internet Settings 55, 64

Internet Video Parental Control

63

Internet Video Unrated 63

L

Language Code List 79

M

Media Remote Device

Registration 65

Multiplex broadcast sound 44

Music Settings 63

N

Network Connection

Diagnostics 64

Network Settings 64

Network Update 60

O

OSD 63

Output Video Format 61

P

Parental Control Area Code 63

Parental Control Settings 63

Party Auto Start 65

Password 63

Pause Mode 61

Play information 35

Playable discs 74

Preset Mode 59

Q

Quick Start Mode 64

R

RDS 46

Rear panel 12

Region code 74

Registered Media Remote

Devices 65

Remote control 14

Remote Controller Setting

Guide 59

Renderer Access Control 65

Renderer Set-up 64

Reset to Factory Default

Settings 65

Resetting 65

S

Screen Format 60

Screen Saver 64

Screen Settings 60

SLEEP 50

Slideshow 41

Sound Effect 62

Speaker Settings 49, 62

Connection 49

Distance 49

Level 49

Subtitle 62

Super Audio CD Playback

Channels 63

Super Audio CD Playback

Layer 63

Surround amplifier 13

Surround Setting 62

System Information 64

T

Test Tone 50

TV Screen Size Setting for 3D

60

TV Type 60

U

Update 60

USB 35

W

WEP 58

Wireless Sound Connection 63

WPA2-PSK (AES) 58

WPA2-PSK (TKIP) 58

WPA-PSK (AES) 58

WPA-PSK (TKIP) 58

81

GB

The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL.

For customers in Europe: http://support.sony-europe.com

For customers in Taiwan: http://www.sony-asia.com/support/tw

For customers in other countries/regions: http://www.sony-asia.com/support

©2011 Sony Corporation Printed in Malaysia (1)

advertisement

Key Features

  • DVD player Black
  • 1000 W 5.1 channels
  • Dolby Digital, Dolby Digital Plus, Dolby Pro Logic, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1)
  • 3D Full HD
  • FM radio Radio Data System (RDS)
  • Wi-Fi

Related manuals

Frequently Answers and Questions

How do I connect the system to my TV?
Use the provided HDMI cable to connect the system to the HDMI input on your TV.
Can I play Blu-ray discs on this system?
Yes, the system supports playback of Blu-ray discs, DVDs, and CDs.
How do I stream content wirelessly to the system?
Ensure your devices are connected to the same Wi-Fi network and use the system's built-in wireless connectivity features.
Can I control the system with my smartphone?
Yes, you can download the dedicated app to control the system remotely from your smartphone.

advertisement

Table of contents