- Home
- Do-It-Yourself tools
- Power tools
- Power fine-spray systems
- Graco
- 3A3109C, ToughTek F340e Portable Fireproofing Pump
- User Guide
Technical Specifications. Graco 3A3109C, ToughTek F340e Portable Fireproofing Pump
Add to my manuals40 Pages
advertisement
Maximum Fluid Working Pressure
Stroke Length
Maximum pump speed (Do not exceed maximum recommended speed of fluid pump to prevent premature pump wear)
Weight (dry)
Wetted Parts
600 psi
2.25 in.
4.1 MPa, 41 Bar
150 cycles per minute
57 mm
210 lb 95 kg
Stainless steel, plated steel, carbide, urethane, PTFE,
UHMWPE, LLDPE, aluminum, solvent-resistant o-rings
Inlet/Outlet Sizes
Fluid Inlet Size
Fluid Outlet Size
Hose Requirements
Minimum Pressure
Minimum Hose Diameter
Minimum Hose Length
Power Requirements
100–120 VAC Models
200–240 VAC Models
Noise Level
Sound Power
Sound Pressure
*per ISO 3744; measured at 3.1 ft
Operating Ambient Temperature Range
Temperature
3 in.
1.5 in. npt(f) with 1.5 in. cam and groove fitting
600 psi
1.0 in.
25 ft
32° F to 120° F
90.4 dBa*
80.5 dBa*
4.1 MPa, 41 Bar
1 phase, 50/60 Hz
1 phase, 50/60 Hz
2.5 cm
7.6 m
4° C to 49° C
3A3109C 39
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Models
- 3 Related Manuals
- 3 Agency Approvals
- 4 Warnings
- 7 Component Identification
- 7 Overview
- 7 Component Identification Table
- 8 Fluid Drain/Purge Valve
- 8 Motor Power Switch
- 8 Applicator Ball Valve (17J703)
- 9 Install the Remote Switch
- 9 Pump Control Settings
- 10 Grounding
- 11 Setup
- 12 Flush
- 13 Mix the Material
- 14 Prime with Material
- 15 Spray
- 15 Prevent Pack-out
- 15 Before Starting or Stopping Material Flow
- 15 Sprayer Performance
- 15 Spraying
- 16 Spray Adjustments (Pole Spray Applicator Kit 24Y619)
- 16 Air Flow Valve Adjustment
- 16 Material Flow Adjustment
- 17 Spray Techniques
- 17 Installing Nozzle Retaining Cap
- 18 Pressure Relief Procedure
- 19 Hopper Removal
- 19 Shutdown
- 19 Lifting Instructions
- 20 Maintenance
- 20 Daily Maintenance
- 20 Water Exposure
- 20 Preventative Maintenance
- 20 Corrosion Protection
- 21 Troubleshooting
- 21 Mechanical/Fluid Flow
- 22 Electrical
- 24 Notes
- 25 Repair
- 25 Replace Pump Lower
- 26 Replace Pump Components
- 29 Notes
- 30 Parts
- 37 Replacement Parts and Accessories
- 39 Technical Specifications
- 40 Graco Standard Warranty