Playback. Sony DVP-FX950

Playback

Playing Discs

4

Insert the disc to be played.

Place with the playback side down and push gently until it clicks.

Depending on the disc, some operations may be different or restricted. Refer to the operating instructions supplied with the disc.

Connect the AC power adaptor or attach the battery pack.

x

X

N

PUS

H C

LOS

E

VOL DISPLAY MENU RETURN OPTIONS

POWER CHARGE

Playback side facing down

5

Push the PUSH CLOSE on the disc lid to shut the disc lid.

6

Press N.

The player starts playback.

Depending on the disc, a menu may appear. Press C/X/x/c to select the item, and press ENTER.

PO

W

ER

CH

AR

GE

OPEN

AT

OP ER

E

OF

F

ON

PUSH CLOSE OPEN OPERATE

To stop playback

Press x.

To pause playback

Press X.

1

Open the LCD panel.

2

Slide the OPERATE switch to

“ON.”

The player turns on and the POWER indicator lights up in green.

3

Press OPEN to open the disc lid.

z

When you play back a disc after enjoying images by “Line In” or “USB,” press INPUT SELECT

repeatedly to select the disc mode. See page 7.

b

• Discs created on DVD recorders must be correctly finalised to play on the player. For more information about finalising, refer to the operating instructions supplied with the DVD recorder.

• The disc may be still spinning when the disc lid is opened. Wait until the spinning stops before removing the disc.

,continued

15

16

Notes on the screen saver

• A screen saver image appears when you leave the player in pause or stop mode without operation for more than 15 minutes. The image disappears when you press N. For the setup of “Screen

Saver,” see page 22.

• The player goes to standby, 15 minutes after starting the screen saver function.

Press N to come out of standby mode.

To resume playback from the point where you stopped the disc (Resume

Play)

When you press N again after you stop playback, the player starts playback from the point when you pressed x.

z

• To play from the beginning of the disc, press x twice, and press N.

• When turning power on again after power off, resume play starts automatically.

b

• Depending on the stop point, Resume play may not start from exactly the same point.

• The resume point is cleared when:

– you open the disc lid.

– you press INPUT SELECT.

– you disconnect the adaptor or remove the battery pack before turning off the player.

To play VIDEO CDs with PBC Functions

(PBC Playback)

PBC (Playback Control) allows you to play VIDEO CDs interactively using a menu. When you start playing a VIDEO

CD with PBC functions, the menu appears.

Select an item using the number buttons on the remote, and press ENTER. Then, follow the instructions in the menu (press

N when “Press SELECT.” appears).

About various playback operations

To

Change the LCD picture size

Operation

Press OPTIONS to select “LCD Mode”

(page 20).

Display the DVD menu

Press MENU (page 6)

or TOP MENU

(page 8).

Check the DVD playback information

Play DVDs*

1 repeatedly

(Repeat Play)

Play DVDs in fast reverse or fast forward

(Scan Play)

Press DISPLAY

(page 17).

Press DISPLAY to select “Repeat”

(page 17).

Press C/c repeatedly on the player to select the

speed (page 6).

Switch between original and

Playlist in DVD

(VR mode)

Check the CD or

VIDEO CD playback information

Press TOP MENU

repeatedly (page 8).

Press DISPLAY

(page 6).

Press MENU

repeatedly (page 6).

Play CDs or

VIDEO CDs*

2 repeatedly

(Repeat Play)

Play CDs or

VIDEO CDs*

2 randomly

(Random Play)

Play CDs or

VIDEO CDs in fast reverse or fast forward

(Scan Play)

Press MENU

repeatedly (page 6).

Press C/c repeatedly on the player to select the

speed (page 6).

*

1

*

2

DVD VIDEO only only when “PBC” is set to “Off.”

Using the Playback

Information Display

While playing a DVD, you can check the current playback information. The playback information display also allows you to set a title/chapter or change sound/ subtitle, and so on.

When entering the numbers, operate the number buttons on the remote.

1

Press DISPLAY while playing a

DVD.

The current playback information appears.

Example: When playing a DVD

VIDEO

Items Current playback information* pressing ENTER. Enter the desired time code by pressing the number buttons.

• C.Time: Time appears while playing a chapter. “00:00:00” will appear by pressing ENTER. Enter the desired time code by pressing the number buttons.

• Repeat: Select “ Chapter,” “

Title,” “ All,” or “Off” by pressing X/x.

• A-B Repeat: Select “Set” by pressing

X/x, and press ENTER. Select point

A and point B by pressing ENTER.

• Time Disp.: “Title Elapsed” is displayed. Select “Title Elapsed,”

“Title Remain,” “Chapter Elapsed,” or “Chapter Remain” by pressing X/ x.

3

Press ENTER.

Menu

Title

Chapter

Audio

Subtitle

02/07

03/20

01 5.1CH D English

01 English

Title Elapsed 00:12:01

Elapsed or remaining time

To turn off the display

Press DISPLAY or RETURN.

b

Depending on the disc, you may not be able to set some items.

* When a DVD (VR mode) is played, “PL”

(playlist) or “ORG” (original) is displayed next to the title number.

2

Press X/x to select items and press

ENTER.

• Title: Select the title number by pressing X/x or number buttons.

• Chapter: Select the chapter number by pressing

X/x or number buttons.

• Audio: Select the sound by pressing

X/x.

• Subtitle: Select the subtitle by pressing X/x.

• Angle: Select the angle by pressing

X/x.

• T.Time: Time appears while playing a title. “00:00:00” will appear by

17

18

Playing MP3, JPEG, and Video Files

To go to the next or previous file

Press > or ..

To stop playback

Press x.

You can play MP3, JPEG, and video files.

For details on playable files, see “Playable

Media” (page 30).

When you set a DATA media, a list of albums appears.

DATA CDs recorded in KODAK Picture

CD format automatically start playing when inserted.

x

X

N

VOL z

If the number of viewing times is preset, you can play the DivX video files as many times as the preset number. The following occurrences will be counted as one time:

– when x is pressed twice.

– when the player is turned off (including standby mode).

– when the disc lid is opened.

– when another file is played.

– when INPUT SELECT is pressed.

– when the USB device is disconnected.

MENU

C/X/x/c

ENTER b

Depending on the file, playback may take time to start or may not be able to start. For details on

playable files, see “Playable Media” (page 30).

./>

DISPLAY MENU RETURN OPTIONS

POWER CHARGE

Selecting a JPEG file

1

Press X/x to select the album,

and press ENTER.

The list of files in the album appears.

Example: The list of MP3 files

Dir:001

MY BEST

. .

BEST HITS

BEST3

01 Stardust

02 Fire

03 Wing

To rotate a JPEG image

Press C/X/x/c while viewing the image file. Rotate every file.

c: Rotates the image 90 degrees clockwise.

C: Rotates the image 90 degrees counter clockwise.

X: Reverses the image vertically (up and down).

x: Reverses the image horizontally (left and right).

• To go to the next or previous page, press > or ..

• To return to the list of albums, press

X/x to select and press ENTER.

2

Press X/x to select the file, and

press ENTER or N.

Playback starts from the selected file.

To display the list of thumbnails

Press MENU.

The image files in the album appear in 12 sub-screens.

1

5

2

6

3

7

4

8

Playing data on a USB device

You can playback DATA files on a USB device.

1

Press INPUT SELECT repeatedly to select “USB.”

2

Connect a USB device to the USB jack.

9 10 11 12

Slide Show Prev Next

DIS

PLA

Y

ME

NU

RET

UR

N

OPT

ION

S

IN

P

U

T S

LE

C

T

• To go to the previous or next list of thumbnails, select “bPrev” or

“NextB” at the bottom of the screen, and press ENTER.

• To exit the list of thumbnails, press

MENU.

OP

EN

OP

ER

AT

E

F

OF

ON

HO

LD

PH

ON

ES

B

A

AU

DI O

IN/

OUT

VI DE

O

IN/

OUT

DC

IN

9.5

V

INPUT

SELECT

To stop slideshow

Press x to return to the list of files.

Press MENU to return to the list of thumbnails.

To pause slideshow

Press X.

USB jack

USB device

Playing a Slide Show

1

Press MENU.

The list of thumbnails appears.

2

Press C/X/x/c to select “Slide

Show” at the bottom of the screen, and press ENTER.

A slideshow starts.

To disconnect a USB device

1

Press INPUT SELECT to deselect

“USB.”

2

Disconnect the USB device.

About supported Sony USB devices

The following Sony USB Memory Stick reader/writer and USB flash drive “Micro

Vault” are supported: MSAC-US40,

USM-J series, USM-JX series, USM-J/B series, USM-L series, and USM-LX series.

b

• Do not disconnect the USB device while its access indicator is flashing. Doing so may cause data corruption or loss of data.

• USB devices which can connect to the player are flash memory and multiple card readers.

Other devices (digital still camera, USB hub, etc.) cannot be connected. When an unsupported device is connected, an error message appears.

19

20

Adjusting the Picture

Size and Quality

You can adjust the picture displayed on the

LCD screen.

VOL +/–

RETURN

C/X/x/c

ENTER

OPTIONS

VOL DISPLAY MENU RETURN OPTIONS

LCD Mode

LCD Aspect :

Backlight :

Contrast :

Hue :

Color :

Default

POWER CHARGE

1

Press OPTIONS.

The menu display appears.

2

Press X/x to select “LCD

Mode” and press ENTER.

The “LCD Mode” display appears.

items

Full

10

10

0

10

• Contrast: Adjust the difference between light and dark areas by pressing C/c or VOL +/–*

2

.

• Hue: Adjust the red and green colour balance by pressing C/c or VOL +/–

*

2

.

• Color: Adjust the richness of colours by pressing C/c or VOL +/–*

2

.

• Default: Return all settings to the factory defaults.

4

Press ENTER.

*

1

In “Normal,” pictures are displayed in their original configuration, retaining the aspect ratio. 4:3 pictures are displayed with black bands on both sides of the screen. 4:3 letter box pictures are displayed with bands on all sides of the screen.

In “Full,” pictures are adjusted to fill the entire screen. 16:9 pictures are displayed in their original configuration. (Black band recorded in a 16:9 picture cannot be erased.)

4:3 pictures appear stretched.

In “Zoom,” 4:3 pictures are displayed full width. The upper and lower areas of the picture will be slightly cut.

*

2

Operate with a single touch of + or – on the player. You can also adjust the level by sliding your finger along the touch slider. For

VOL +/–, see page 5.

To turn off the menu display

Press OPTIONS or RETURN twice.

b

Depending on the disc, the screen size you can select differs.

3

Press X/x to select items and

press ENTER.

• LCD Aspect: Change the picture size.

Select “Normal,” “Full” or “Zoom” by pressing X/x*

1

.

• Backlight: Adjust the brightness by pressing C/c or VOL +/–*

2

.

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project