Electrolux Eimed55iiw Use And Care Manual

14

Operating Instructions

Dryness Level (Auto Dry)

The appropriate dryness level will automatically be indicated when the cycle is selected.

To change the preset level, press the dryness button to scroll to the degree of dryness desired.

To protect your fabrics, not all dryness levels are available with every cycle. If a dryness level is not appropriate for the cycle, it cannot be selected and will not be lit by pressing the dryness button.

The dryness level selected for the cycle will be remembered and recalled each time that cycle is selected in the future.

NOTE

To change the dryness level once the cycle has begun, press the pause button, make the new selection and press start again.

Select the normal dryness level for most Auto Dry cycles.

Occasionally a load may seem too damp or overdried at the end of the cycle. To increase drying time for similar loads in the future, select max. For loads requiring less drying time, select less.

Select damp for items you wish to partially dry before hanging or ironing.

Drying Time (Time Dry)

Press the time dry button under the display window to select 15, 30, 45, 60 or 75 minutes of drying time. This button only operates with the time

dry cycle. If you press the time dry button while in an Auto Dry cycle, an error chime signal will sound.