User Guide

Add to my manuals
123 Pages

advertisement

User Guide | Manualzz

3.3.3 Smart Sync

To use Smart Sync:

1. Launch AiCloud, click Smart Sync > Go.

4. Enter your ASUS WebStorage account password and select the directory that you want to sync with WebStorage.

33

2. Follow the steps below to add, delete, or modify an account.

To create a new account:

a) Click to add new account.

b) In the Account and Password fields, key in the name and password of your network client. Retype the password to confirm. Click Add to add the account to the list.

34

To delete an existing account:

a) Select the account that you want to delete.

b) Click .

c) When prompted, click Delete to confirm the account deletion.

To add a folder:

a) Click .

b) Enter the folder name, and click Add. The folder that you created will be added to the folder list.

3. From the list of folders, select the type of access permission that you want to assign for specific folders:

R/W: Select this option to assign read/write access.

R: Select this option to assign read-only access.

No: Select this option if you do not want to share a specific file folder.

Using the FTP Share service

FTP share enables an FTP server to share files from USB disk to other devices via your local area network or via the Internet.

IMPORTANT:

• Ensure that you safely remove the USB disk. Incorrect removal of the USB disk may cause data corruption.

• To safely remove the USB disk, refer to the section Safely removing the

USB disk under 3.1.3 Monitoring your USB device.

35

36

To use FTP Share service:

NOTES:

Ensure that you have set up your FTP server through

AiDisk.

For more details, refer to the section 3.5.1 Using AiDisk.

1. From the navigation panel, click General > USB application

> Servers Center > FTP Share tab.

2. From the list of folders, select the type of access rights that you want to assign for specific folders:

R/W: Select to assign read/write access for a specific folder.

W: Select to assign write only access for a specific folder.

R: Select to assign read only access for a specific folder.

No: Select this option if you do not want to share a specific folder.

3. Click Apply to confirm the changes.

4. To access the FTP server, key in the ftp link

ftp://<hostname>.asuscomm.com and your user name and password on a web browser or a third-party FTP utility.

Miscellaneous setting

Miscellaneous setting allows you to configure other settings for the USB disk, including the maximum number of user logins, the device name, work group, and character set used on the FTP server.

To configure Miscellaneous settings:

1. From the navigation panel, click General > USB application

> Servers Center > Miscellaneous setting tab.

2. Configure the following settings:

• Maximum Login User

Set the maximum number of concurrent connections of the

Network Neighborhood or FTP Server.

NOTE: Some FTP clients may establish more than one connection. Setting this number too low will lead to login failures.

• Device Name

Assigns the name of the device as shown on the network.

For example, for a device with the name ABC, enter //ABC on the Internet Explorer address bar to access the Network Place service.

37

38

• Work Group

Assigns the name of the local CM-32 network as seen in

Network Neighborhood.

NOTE: For Device Name and Work Group, the standard input characters include letters (a-z, A-Z), digits (0-9), space, underscores(_), and hyphens(-). The first and last character should not contain any spaces. An invalid workgroup name makes it harder for other devices to find your device in the network.

• Character set on FTP Server

Select the appropriate encoding used during data exchange on the FTP server.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals