User Guide

Add to my manuals
123 Pages

advertisement

User Guide | Manualzz

Enable wildcard: Enable wildcard if your DDNS service requires one.

NOTES:

DDNS service will not work under these conditions:

• When the wireless router is using a private WAN IP address (192.168.x.x,

10.x.x.x, or 172.16.x.x), as indicated by a yellow text.

• The router may be on a network that uses multiple NAT tables.

4.3.6 NAT Passthrough

NAT Passthrough allows a Virtual Private Network (VPN) connection to pass through the router to the network clients.

PPTP Passthrough, L2TP Passthrough, IPsec Passthrough and RTSP

Passthrough are enabled by default.

To enable / disable the NAT Passthrough settings, go to the

Advanced Settings > WAN > NAT Passthrough tab. When done, click Apply.

69

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals