advertisement
▼
Scroll to page 2
of 154
8.4 Confirming Alarm Logs
8.4 Confirming Alarm Logs
You can view information about the last 50 image buffer triggers on the [Alarm Log] page.
1.
Click the [Maintenance] tab.
2.
On the left side of the screen under [Maintenance], click [Alarm Log].
3.
Confirm the desired information.
Note
•
When the camera is restarted, the alarm log content is deleted.
•
You can configure the camera to send a daily log by E-mail that reports the status of triggers 1–5 (see
122 Operating Instructions
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement
Table of contents
- 7 1 Camera Monitoring
- 7 Accessing the Camera
- 9 Viewing Live Camera Images
- 14 Using the Operation Bar
- 15 Aiming the Camera Lens
- 17 Limiting the Pan/Tilt Range
- 18 White Balance
- 19 Video Images (MJPEG and MPEG-4) and Image Refresh Rate
- 20 Zooming
- 21 Taking Snapshots
- 22 Registering and Changing Presets
- 23 Audio Features
- 24 Viewing Multiple Camera Images
- 26 2 Using Triggers to Buffer and Transfer Images
- 27 Configuring a Timer Trigger
- 30 Configuring a Sensor or Motion Detection Trigger
- 35 Disabling and Enabling a Trigger
- 36 Configuring the Camera to Transfer Images
- 37 Transferring Images by FTP
- 39 Transferring Images by E-mail
- 42 Transferring Images by HTTP
- 44 Configuring the Camera to Send Trigger Notifications
- 45 Sending Trigger Notifications by E-mail
- 48 Sending Trigger Notifications by HTTP
- 50 Viewing Buffered Images
- 54 Deleting Buffered Images
- 56 Adjusting Sensor Sensitivity
- 57 Adjusting Motion Detection Sensitivity
- 59 Sending Alarm Log Information
- 62 3 Mobile Phone Features
- 63 Accessing the Camera from Your Mobile Phone
- 64 Viewing Still Images on Your Mobile Phone
- 65 Viewing Alarm Logs on Your Mobile Phone
- 66 Enabling and Disabling Image Buffering Using Your Mobile Phone
- 67 4 Configuring the Camera for Access from the Internet
- 71 Configuring Port Forwarding
- 74 Configuring the Camera to Use a Dynamic DNS Service
- 75 Configuring the Camera to Use Viewnetcam.com
- 78 Configuring the Camera to Use a Third-party Dynamic DNS Service
- 80 Confirming Internet Access
- 81 5 Changing Camera Settings
- 81 Network Settings
- 82 Network (IPv4) Settings
- 87 Proxy Server Settings
- 88 Using the Camera in Wireless Mode (BL-C131A Only)
- 89 Configuring the Camera for Wireless Connection (BL-C131A Only)
- 93 Restarting the Camera in Wireless Mode (BL-C131A Only)
- 94 UPnP™ Settings
- 95 Setting the Date and Time
- 97 Changing Basic Camera Settings
- 98 Changing Audio Settings
- 99 Changing Video Streaming Settings
- 102 6 User Accounts
- 102 Understanding User Accounts
- 103 Changing the Administrator User Name and Password
- 104 General Users
- 107 Guest Users
- 109 The Login Tab
- 110 7 Advanced Settings
- 110 Changing Image Display Settings
- 113 Registering Multiple Cameras
- 115 Specifying Operation Times
- 117 Changing the Indicator Display
- 118 Privacy Mode
- 119 8 Camera Administration and Maintenance
- 119 Confirming Camera Status
- 120 Confirming Wireless Status (BL-C131A Only)
- 121 Confirming Session Status
- 122 Confirming Alarm Logs
- 123 Restarting the Camera
- 124 Updating the Camera Firmware
- 125 Saving Settings in a Configuration File
- 126 Restoring Settings from a Configuration File
- 127 Resetting the Camera
- 129 9 The [Support] Tab
- 130 10 Using IPv
- 131 Configuring Your Router for IPv
- 132 Configuring Your PC for IPv
- 133 Configuring Your Camera for IPv
- 136 Accessing the Camera in IPv6 Mode
- 137 11 PC Settings
- 137 Proxy Server Settings
- 140 Creating a Shortcut to the Camera
- 141 Changing the [Temporary Internet files] Setting
- 142 About the MPEG-4 Viewer Program
- 143 12 Using the Setup Program
- 146 13 Technical Information
- 146 Cleaning the Camera
- 147 ASCII Character Table
- 148 Internal Memory Specifications for Buffered Images
- 149 Default Setting List
- 153 Specifications