Shipping Contents. JET JWBS-14OS

Below you will find brief information for JWBS-14OS. The JWBS-14OS is a 14-inch woodworking band saw that is designed for cutting wood. It offers a cutting capacity of 6 inches in height and 13-1/2 inches in width, and can accommodate blades from 1/8 inch to 3/4 inch. The table can be tilted up to 45 degrees to the right and 10 degrees to the left. The band saw also features a 4-inch dust port.

PDF

Document

Key features

Cutting capacity: 6'' height, 13-1/2'' width
Accepts blades from 1/8'' to 3/4'' width
Table tilts 45° right, 10° left
3/4HP, 115/230V motor
Features a 4'' dust port

Frequently asked questions

Turn the blade tension knob clockwise to increase tension or counterclockwise to decrease it. Adjust the tension according to the blade size.

Loosen the blade tension, remove the table insert, open both wheel covers, and remove the blade from between the upper and lower blade guides and wheels.

Loosen the front and rear lock knobs, tilt the table to the desired angle (up to 45 degrees right or 10 degrees left), and then tighten the lock knobs.

The dust port diameter is 4 inches.