advertisement
E
N
G
L
I
S
H
21
Audio Settings
[SQ] (Sound Quality)
Turn [VOLUME]. (Press [VOL
}
] or
[VOL
{
] on the remote control unit.)
MUTE
SRC
PWR
VO
LU
M
E
L
SE
H
SQ
1 2
SCROLL
3
RANDOM
4
CQ-C5401W
SCAN
5
N
E
/T
R
AC
K
TILT/OPEN
DISC
BAND
APM
REPEAT
6
FO
CLOCK
LD
ER
DISP
Preset Buttons [2] to [6]
[DISP] (Return to the regular mode)
Volume
Default: 13
Setting range: 0 to 40
Press [VOLUME]
(PUSH SEL: select).
(Press [SEL] on the remote control unit.)
[[] []]
[{] [}]
[BAND]
Press [VOLUME] (PUSH SEL) to open the menu.
Bass/Treble
You can adjust the bass and treble sounds.
Default: BAS (bass) 0 dB
TRE (treble) 0 dB
Setting range: –12 dB to +12 dB (by 2 dB)
Press [VOLUME] (PUSH SEL).
Press [VOLUME] (PUSH SEL).
SQ Adjustment
You can adjust the characteristics of the currently selected sound type (SQ).
It is also possible to preset up to 5 different adjusted SQs.
Tone/SQ adjustable range: –12 dB to +12 dB (by 2 dB)
SQ Low/Bass : ± 12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid : ± 12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble : ± 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
¡ The bass/treble control frequency is fixed to the frequency that has been selected for SQ.
FTo return an adjusted SQ to the default setting q Press [SQ], and select the SQ which is to be returned to the default setting. (Only for main unit) w Press and hold [BAND] for more than 2 seconds.
Press [VOLUME] (PUSH SEL).
The SQ adjustment mode can be established also by pressing [SQ] for more than 2 seconds.
(Page 24)
22
CQ-C5401W/C5301W
Regular mode VOLUME BASS TREBLE
SQ SET
BALANCE SUBW LPF SUBW LEV FADER
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment, 10 seconds in the SQ adjustment), the display returns to the regular mode.
¡ The volume can also be adjusted directly using [VOLUME] on the main unit. ( a Page 9)
¡ Please refer to page 9 for calling up a preset SQ.
E
N
G
L
I
S
H
Turn [VOLUME].
q : Up w : Down
Turn [VOLUME].
q : Up w : Down
Turn [VOLUME].
q : Up w : Down
Note:
¡ You cannot save any SQ presetting value in [1] button.
¡ Any SQ adjustments will not change the call up screen names such as ROCK and JAZZ.
q
Press [[] or []] to select a frequency band (Low, Mid, High).
[[] : Higher frequency band
[]] : Lower frequency band
Turn [VOLUME] to select a frequency.
q: Higher frequency w: Lower frequency w
Press [}] or [{] to adjust the level.
[}]: Up
[{]: Down e
Press and hold one of the preset buttons from [2] to [6] for more than 2 seconds.
¡The adjusted SQ is preset in the number of the selected button, and return to the regular mode resumes.
Frequency
The selected frequency band blinks.
Level
¡When you suspend the SQ preset adjustment, each level remains your recent adjustment until a new SQ presetting operation is performed or you call up the SQ preset.
CQ-C5401W/C5301W
23
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project