ENGLISH 31
Problem
The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo".
11.2 Service data
Possible cause
The demo mode is activated.
Remedy
1. Deactivate the oven.
2. Press and hold the button .
3. The first digit on the display and Demo indicator start to blink.
4. Enter the code 2468 by pressing the buttons or to change the values and press to confirm.
5. The next digit starts to blink.
6. Demo mode deactivates when you confirm the last digit and the code is correct.
on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC)
Serial number (S.N.)
.........................................
.........................................
12. INSTALLATION
WARNING!
Refer to Safety chapters.