Unbranded MFI2500 is a 1400W Electric Masonry Fireplace Insert designed for use in indoor settings, offering a cozy and realistic fireplace experience without the hassle of a real fire. With its compact dimensions (24 in. W x 10.5 in. D x 19.5 in. H), it's ideal for smaller spaces and can be easily installed in an existing fireplace or used as a standalone unit.
The MFI2500 features a manual control for adjusting the flame intensity and heat output, allowing you to customize the warmth and ambiance to your liking. It comes with a realistic ember bed and grate, providing a lifelike and inviting fireplace effect.
advertisement
installation
1
Preparing the fireplace
WarninG: The MFI2500 electric masonry insert must be installed in an opening with the minimum dimensions 26 in. W (66 cm) x
21.5 in. H (54.6 cm) x 12.8 in. D (32.5 cm)
CaUTiOn: To prevent personal injury always used a licensed electrician to install new outlets or electrical circuits. Always use a professional to cap the chimney flue or cut a hole in the existing fireplace for wiring.
CaUTiOn: If returning your fireplace to its original use (ex. wood burning), it should be inspected by the local building department prior to use to reduce the risk of fire and personal injury.
□ Seal all drafts and vents with non-fibrous insulation materials to prevent chimney debris from falling onto the electric fireplace insert.
CaUTiOn: Do not install into an existing fireplace that is prone to dampness
□ Cap the top of the chimney flue and close the damper (if applicable) to prevent rain from entering the chimney.
2
Planning the electric power supply
□
Plan your electric power supply. A 15 amp, 120 volt circuit is required for this electric fireplace insert. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if after installation, the circuit breaker or fuse trips. Additional appliances may exceed the current rating of the circuit breaker or fuse.
□
Install an outlet into the existing fireplace. If an outlet is not installed into the existing fireplace the power cord can also run along the front of the hearth to an outlet near the fireplace.
12.8 in.
21.5 in.
26 in.
6
advertisement