Disconnecting the Hose. Simplicity s40p, S40

Add to my manuals
28 Pages

advertisement

Disconnecting the Hose. Simplicity s40p, S40 | Manualzz

AttACHMent CleAnInG

Cleaning Tools (continued)

Cleaning tools can also be attached to the curved handle for tasks where the wand is not needed.

• Disconnect the wand from the curved handle by pressing the Wand Release

Button (Fig. 1).

• Attach any of the cleaning tools directly to the curved handle.

Adjusting the Suction Power for

Tool Cleaning

Full suction power may be too strong for some cleaning situations. For example, reduced suction power would be appropriate for cleaning sheer curtains.

• On the curved handle, locate the Suction

Relief Valve and slide it backward (Fig. 2).

This reduces the suction power coming through the tool. Slide the valve forward when finished to restore full suction power.

Disconnecting the Hose

The hose can be disconnected from the vacuum by pressing the two buttons on the sides of the Hose Disconnect Cuff located low on the back of the vacuum (Fig. 3).

This allows you to attach an optional extension hose for longer reach and is also a method for removing debris from the hose.

12

Fig. 1

Fig. 2

Fig. 3

MAIntenAnCe AnD CARe

Annual Checkup

To keep your vacuum in peak operating condition, it is recommended you bring your vacuum to an Authorized

Simplicity Vacuum Retailer for an annual checkup. The Retailer will conduct a comprehensive examination to ensure your vacuum is in top operating condition.

Power Cord Care

• If the cord or plug has any apparent damage, refrain from using the vacuum.

Please visit an Authorized Simplicity

Vacuum Retailer for a new cord or plug.

• When the vacuum is in use, hold the cord to keep from running over it.

• Avoid obstructions and do not pull the cord around sharp edges or corners.

• Always keep the cord away from heated surfaces and never close doors on it as this may cause damage to the wiring.

• To unplug, always grasp the plug, not the cord.

When to Change the Vacuum Bag

The Full Bag Indicator Light is designed to show when the bag is full or when there is a clog in the vacuum.

Filter

Full Bag

Yellow Warning Light Indicates a Full Bag Condition

The light could also come on when vacuuming fine powders such as flour or drywall dust. These materials can quickly block the bag pores, significantly reducing airflow before the bag is actually full. The vacuum bag should still be changed.

The light may also come on during attachment cleaning. If the light goes off when attachments are no longer in use, the vacuum bag does not need to be changed.

Note: The vacuum bags are disposable and intended to only be used once.

Do not attempt to reuse the bag, as suction and filtration performance will be greatly reduced.

13

MAIntenAnCe AnD CARe

Replacing the Vacuum Bag

NOTE: Unplug the vacuum cleaner from the electrical outlet before changing the bag.

• To access the vacuum bag lift the bag compartment latch.

• Remove the used vacuum bag by pulling the yellow bag collar tab away from the vacuum (Fig. 1). Slide the used bag out of the holder which automatically seals the bag

(Fig. 2). Discard the used bag.

• To install a new bag, slide the bottom of the yellow bag collar into the bag holder until it

“snaps” into place (Fig. 3).

• Push the top of the bag collar upward until the bag holder “snaps” into place on the vacuum (Fig. 4).

• Tuck the bag corners into the bag compartment before replacing the bag compartment cover.

• Replace the cover and press down on the bag compartment latch to secure it into place.

Fig. 1

Fig. 2

Fig. 3

14

Fig. 4

When to Change the Filters

The filters on your Synergy vacuum should be replaced after 25 hours of operation. The

Synergy is equipped with a filter clock to monitor the actual hours of operation and will illuminate the change filter indicator light on the nozzle of your vacuum when 25 hours of operation have elapsed.

Note:

When the filters are replaced, reset the filter clock (while the vacuum is running) by removing the cap located above the direct air motor filter and pressing the reset button. The change filter indicator light will once again only illuminate after the next 25 hours of operation.

MAIntenAnCe AnD CARe

Filter

Full Bag

Replacing the HEPA Media Filter

• Locate the HEPA Media Filter on the side of the vacuum. (Fig. 1)

• Push down on the tab on the top to remove the used filter and discard it. (Fig. 2)

NOTE: Filters cannot be washed and reused.

• To insert a new filter, position the tabs on the bottom of the filter cartridge into the vacuum. Then snap it into place.

Fig. 1

15

Fig. 2

MAIntenAnCe AnD CARe

Replacing the Charcoal Filter

(S40 model only)

• Remove the bag compartment cover and locate the filter on the left side of the bag compartment.

• Pull the front tab away from the vacuum to remove the filter holder (Fig. 1).

• Remove and throw away the used charcoal filter (Fig. 2). NOTE: Filters cannot be washed and reused.

• Insert a new charcoal filter under the tabs in the holder (Fig. 3). Then align the back of the filter holder into the vacuum first and snap it into place behind the tab.

• Replace the cover and press down on the bag compartment latch to secure it into place.

Replacing the Granulated

Charcoal Filter

(S40P model only)

• Open the bag compartment lid and locate the filter on the left side of the bag compartment.

• Use the latch on the side to remove and discard the entire filter cartridge.

• Insert a new granulated charcoal filter cartridge and snap it into place behind the tab.

• Replace the cover and press down on the bag compartment latch to secure it into place.

16

Fig. 1

Fig. 2

Fig. 3

Replacing the Direct Air Motor Filter

• Press the handle release pedal with your foot, and tilt the handle back until it stops. Press the pedal again to lower the handle to the floor (Fig. 1).

• Pull the black filter cover latch to remove the filter cartridge (Fig. 2).

• Discard the used filter cartridge.

• Insert a new direct air motor filter cartridge and snap it into place.

• Return vacuum handle to its upright position.

Lifetime Belt

Your vacuum belt is covered with a lifetime warranty. Should the vacuum belt break, simply bring your vacuum to your Authorized Simplicity

Vacuum Retailer for a free replacement.

MAIntenAnCe AnD CARe

Fig. 1

Fig. 2

17

MAIntenAnCe AnD CARe

Jammed Brushroll

CAUTION! To Reduce the Risk of Injury From

Moving Parts, Unplug Before Servicing.

If an object, such as a throw rug or article of clothing is ever picked up into your vacuum, the vacuum will sense this jammed brushroll condition and turn off the brushroll. When this happens, the

Brushroll Jam Indicator on the top of the nozzle will light up in red.

• Turn off and unplug the vacuum.

• Remove the cause of the jam.

• Turn the vacuum back on.

• If the brushroll is free of obstructions and the Brushroll Jam Indicator is still lit, it’s likely the clogged condition is located in the vacuum motor fan. If so, please take your vacuum to an Authorized Simplicity

Vacuum Retailer for service.

Cleaning the Dirt Sensor Eye

(S40P model only)

If the amber lights run continuously, it may be the dirt sensor eye has become coated with moist dirt. To remedy this situation, simply vacuum up a small amount of uncooked rice which works to clean the eye. Repeat, if necessary. If the problem persists, contact your Authorized Retailer.

Brushroll

Red Warning Light Indicates a

Jammed Brushroll Condition

Amber Light Amber Light

18

Thermal Motor Protection

CAUTION! To Reduce the Risk of Injury From

Moving Parts, Unplug Before Servicing.

Your vacuum is equipped with a safeguard to recognize when the vacuum might overheat and shuts itself off. When this happens the headlights are still on but the motors shut off. Common reasons why a vacuum may overheat include operating with a full bag or when there is a clog in the vacuum.

If the Thermal Motor Protection System shuts off your vacuum, follow these steps:

• Unplug the vacuum.

• Inspect the vacuum for a full bag condition or a hose clog and correct the problem.

• Locate the Thermal Motor Protection Reset

Button on the back of the vacuum. Press the button and resume vacuuming.

If problem continues, contact your

Authorized Simplicity Vacuum Retailer.

MAIntenAnCe AnD CARe

Thermal Reset

1. Unplug machine

2. Locate problem source (clogged hose or full bag)

3. Correct problem

4. Press reset button

If problem persists, consult owner’s manual or contact retailer.

Thermal Reset

1. Unplug machine

2. Locate problem source (clogged hose or full bag)

3. Correct problem

4. Press reset button

If problem persists, consult owner’s manual or contact retailer.

19

PRoBleM solVInG GUIDe

Troubleshooting

Caution! To Reduce the Risk of Injury from Moving Parts, Unplug the Vacuum before Servicing.

Caution! To Reduce the Risk of Electric Shock, Do Not Handle Plug or Appliance with Wet Hands.

PROBLEM

Vacuum won’t turn on

POSSIBLE REASON

• Power cord not firmly plugged in.

• Blown fuse or tripped breaker.

• Needs service.

POSSIBLE SOLUTION

• Plug unit in firmly.

• Check house fuse or breaker.

Replace fuse/ reset breaker.

• Take to an Authorized

Simplicity Vacuum Retailer.

Vacuum won’t pick up or low suction

• “Carpet” button not on.

• Vacuum bag is full.

• Clogged filter(s).

• Hose clogged.

• Worn brushes.

• Broken belt.

• Tool Activation Dial turned “On”.

• Press “Carpet” button on – it will illuminate when it’s on.

• Replace bag.

• Replace filter(s).

• Remove obstacle.

• Replace brush strips.

• Take to an Authorized

Simplicity Vacuum Retailer.

• Turn Tool Activation Dial to “Off” position for carpet and bare floor cleaning.

Dust escaping from vacuum • Dust compartment cover not attached properly.

• Filters not installed correctly.

• Attach the dust compartment cover and secure latch.

• Review filter installation

(pages 15-17).

Any other service should be performed by an Authorized Simplicity Vacuum Retailer.

To locate your nearest Authorized Retailer, visit our website at

www.SimplicityVac.com or call 888-9-SIMPLY.

Key Replacement Parts

• Genuine HEPA Media Vacuum Bags:

SPH-6

• Genuine Filter Sets:

SF40 (HEPA media and charcoal)

SF40G (HEPA media and granulated charcoal)

For Best Performance

• Keep your vacuum clean and in good operating condition.

• Change the vacuum bag once a month or when the full bag light is illuminated to maximize cleaning performance.

• Always use genuine Simplicity vacuum bags and replacement parts. Use of other products may result in poor cleaning performance, potential vacuum cleaner damage and may void vacuum warranty. Genuine products are designed for maximum cleaning performance.

• Have your vacuum checked annually by your Authorized Simplicity Vacuum Retailer.

• Store your vacuum carefully in a dry area.

• For optimum cleaning performance and safety, follow your owner’s manual instructions.

20

WARRAntY

What is Covered:

This warranty covers any defects in material and workmanship in your new Simplicity vacuum and applies exclusively to the original purchaser.

How Long Coverage Lasts:

Warranty coverage for your S40P model lasts seven years. Warranty coverage for your S40 model vacuum lasts six years. Household models used commercially are only warranted for

90 days.

What is Not Covered:

• Damage to the vacuum which occurs from neglect, abuse, alterations, accident, misuse or improper maintenance.

• Normal replacement items: disposable bags, disposable filters and agitator brushes.

• Damage associated with or resulting from the use of non-genuine parts including normal replacement items.

What We Will Do:

This warranty provides, at no cost to you, all labor and parts to keep this vacuum in correct operating condition during the warranted period.

How to Get Service:

Warranty service can only be obtained by presenting the vacuum to an Authorized

Simplicity Vacuum Retailer. A proof-of-purchase and product serial number will be required before service is rendered. To locate your nearest Simplicity Vacuum Retailer, please call

888.9.SIMPLY or visit www.SimplicityVac.com.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES

WHETHER WRITTEN, ORAL, EXPRESSED OR IMPLIED, (INCLUDING ANY WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). THIS WARRANTY

DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

How State Law Applies:

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Register your warranty online at

www.SimplicityVac.com

21

oWneR’s WARRAntY InFoRMAtIon

keep this for your records…

Date of purchase

Serial number

Model number

Purchased from:

Store name

Address

City, State, Zip

Telephone

22

notes

24

©2015 Tacony Corporation www.

SimplicityVac.com

B503-8100 6.15

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement