3.10 Fastheading connection. Raymarine E90W, E120W, e140

3.10 Fastheading connection

If you wish to use MARPA (radar target acquisition) functions on a system without a SeaTalk ng autopilot then you will require a dedicated Fastheading connection. The connection uses

NMEA 0183 and can be made to either a compatible Raymarine autopilot or a dedicated Fastheading sensor. If your system includes a Raymarine SPX course computer connected using SeaTalk ng then you will not need the separate Fastheading connection.

Typical Fastheading from NMEA 0183 compatible autopilot

1 2

Note: The connection can be made into any NMEA 0183 port.

1.

Display

2.

Autopilot course computer

3.

Autopilot connected via NMEA 0183 (Fastheading and other relevant data)

4.

Autopilot controller

5.

Fluxgate compass

4

3

NMEA0183

5

D11220-2

Cables and connections 39