Patricia G.
What does a flash code of 9 mean on the Rascal Scooter?
A flash code of 9 on the Rascal Scooter indicates an internal error.
Below you will find brief information for Rascal 600 600T, Rascal 600 600F, Rascal 600 600C. The manual covers safety precautions, component identification, and operational controls like the fuel gauge, speed dial, and engager levers. Adjustments for seat, armrests, and handlebars ensure user comfort. Essential for maximizing the scooter's potential and lifespan, the manual also addresses battery charging, troubleshooting, and maintenance procedures. It highlights important aspects, from initial setup to long-term care.
Advertisement
Advertisement
Advertisement
ConvertAble design (can be configured as 3-wheel, 4-wheel scooter or indoor Powerchair)
Adjustable seat (armrest width, backrest angle, swivel position)
Digital controller with self-diagnostics
On-board battery charger
Hazard and turn signal lights (excluding 600C)
Quick Disconnect Drivetrain (QDDT)
If the fuel gauge indicator goes into the red area while operating your vehicle, the batteries need to be recharged as soon as possible.
Remove the nut and bolt on the hinge using the supplied wrench and allen key and reinstall the hardware into the desired seat back angle setting.
Turn the Scooter OFF as soon as it is safe to do so and report the incident to the Service department of Electric Mobility Corp.
What does a flash code of 9 mean on the Rascal Scooter?
A flash code of 9 on the Rascal Scooter indicates an internal error.
What does a flash code of 9X on a Rascal Scooter indicate?
A flash code of 9X on the Rascal Scooter indicates an internal error.
What does it mean when the status indicator lamp flashes nine times?
A status indicator lamp flashing nine times consecutively indicates an internal error.