TD-E Manual.xps

Add to my manuals
77 Pages


TD-E Manual.xps | Manualzz Page 28 Monday, August 31, 2015 4:30 PM


Chapter 2

Preparation for use

Connecting with an analog video source

Analog connection:


Connect a signal cable (VGA or YPbPr cable), to the VGA or AV IN connector.


Select AV, Component, or VGA using the SOURCE button on the LCD display, or the SOURCE button on the infrared remote control. Once selected, the audio automatically switches to [LINE IN].

Audio connection:

• Connect an audio cable (ø3.5-mm stereo mini) (commercially available), to the LINE IN connector. Because the audio automatically switches to [LINE IN], the audio is output simply by connecting the cable.

The display automatically distinguishes the timings shown in the table below, and sets the screen information. When a

PC or other device is connected, it automatically displays images properly. See “"Connecting with a digital video source"” on page 29.


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF


Table of contents