Nokia 2865 User`s Guide

9251716_2865_1_en_au_oth_v1.0.fm Page 58 Friday, September 1, 2006 10:18 PM

S e t t i n g s

If you select

Lock now

, you must enter your lock code before the phone will function normally. After the lock code is accepted, your phone functions normally.

Call not allowed

appears if you attempt to place a call while your phone is locked.

To answer a call with phone lock on, select

Answer

, or press the call key.

Allowed number when phone locked

With phone lock on, the only outgoing calls you can make are to the emergency number programmed into your phone and the numbers stored in the

Allowed no. when phone locked

location.

1. Select

Menu

>

Settings

>

Security

.

2. Enter the lock code, and select

OK

.

3. Select

Allowed no. if lock active

>

Assign

and one of the three slots.

4. Enter the phone number, or select

Search

to retrieve the number from the phone book; select

OK

.

To place a call to an allowed number when the phone is locked, enter the allowed number and press the call key.

Change lock code

When changing the lock code, avoid using codes similar to emergency numbers to prevent accidental dialling of an emergency number.

If you enter an incorrect lock code five times in a row, your phone may ask you for the security code. By default, the security code is the five-digit number,

12345.

To change the phone lock code, do the following:

1. Select

Menu

>

Settings

>

Security

.

2. Enter the current lock code, and select

OK

.

3. Select

Change lock code

.

4. Enter the new lock code (only 4 characters), and select

OK

.

5. Enter the new lock code again for verification, and select

OK

.

When you change your lock code, make sure to remember it. If necessary, write it down and store it in a safe place away from your phone.

Call restrictions

Call restrictions

allows you to block or permit numbers for incoming or outgoing calls.

1. Select

Menu

>

Settings

>

Security

.

2. Enter the lock code, and select

OK

.

58