advertisement
▼
Scroll to page 2
of 115
Firmware User
’s Manual V6.05.xx
ePTZ View Mode
ePTZ mode works as an optical PTZ (pan-tilt-zoom) function. You can change the viewing direction by moving the mouse over the Live View screen and clicking towards the direction you wish to view. The mouse cursor is represented by a red “
+
” mark.
If Miniature Fisheye-view is enabled, the current direction and scope of view is shown on the
Miniature Fisheye-view window with the red marking.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement
Table of contents
- 6 Connect the Equipment
- 6 Configure the IP Addresses
- 10 Access the Camera
- 12 Login
- 13 Live View
- 17 View Modes
- 18 ePTZ View Mode
- 19 Panorama View Mode
- 20 Fisheye View Mode
- 21 PTZ Control Panel (For PTZ and Zoom Cameras)
- 21 How to Use Pan/Tilt
- 22 How to Zoom the Camera In or Out
- 23 How to Set the Home Position
- 23 How to Set Serial Hex Command Protocol
- 23 How to Adjust the Focus
- 24 How to Set Touring Preset Points
- 24 How to Set and Enable Tours
- 26 Access the Setup Page
- 28 Date & Time
- 30 Network
- 30 IP Address Filtering
- 32 Port Mapping
- 34 HTTPS
- 35 IEEE 802.1X
- 37 SNMP Setting
- 41 Network (ToS, UPnP, Bonjour, ONVIF)
- 44 IP Settings
- 44 Connection Type
- 50 Video & Audio
- 50 Camera Options on Fisheye Cameras
- 51 Camera Options on 1.3MP Cameras
- 52 Compression
- 55 Motion Detection
- 60 Day/Night
- 61 Image
- 63 Exposure / White Balance
- 67 OSD/Privacy Mask
- 70 On-Screen Graphics
- 72 Audio
- 73 Event
- 73 Event Server
- 76 Event Configuration
- 83 Event List
- 86 Manual Event
- 87 Local Storage Management
- 88 Status
- 89 Utilities
- 94 Setup
- 95 File Management
- 101 Event Handler with Local Storage
- 108 System
- 108 User Account
- 109 System Info
- 110 Factory Default
- 111 Firmware Upload
- 112 Save & Reboot
- 113 Logout