Recording to a card. Panasonic HCV180EB, HCV180EP, HC-V180

HC-V180EP&EB-SQT1132_mst.book 13 ページ ２０１５年１０月２０日　火曜日　午後４時５９分

Preparation

Recording to a card

The unit can record still pictures or motion pictures to an SD card. To record to an SD card, read the following.

Cards that you can use with this unit

Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating for motion picture recording.

Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC

Memory Cards that can be used for motion picture recording on the following website.

http://panasonic.jp/support/global/cs/e_cam

(This website is in English only.)

≥ Keep the Memory Card out of reach of children to prevent swallowing.

Inserting/removing an SD card

When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 22) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored.

Caution:

Check that the access lamp has gone off.



Access lamp

[ACCESS] A

≥ When this unit is accessing the SD card, the access lamp lights up.





1

Open the SD card cover and insert (remove) the SD card into (from) the

card slot B.

≥ Face the terminal side C in the direction shown in the illustration and press it straight in as far as it will go.

≥ Press the centre of the SD card and then pull it straight out.

2

Securely close the SD card cover.

≥ Securely close it until it clicks.

13

(ENG) SQT1132