3-4. Setup – Device Mode. Active Vision SX-420 60 Pages
Active Vision SX-420 is a high-quality standalone 9/16 channel MPEG-4 Triplex DVR. It offers excellent video quality with a maximum frame rate of 120fps at 352x240 resolution in NTSC mode and 100fps at 352x288 resolution in PAL mode. The device supports continuous, scheduled, motion, sensor, and manual recording modes, providing flexible options for capturing footage. Additionally, it features advanced motion detection with customizable grid-based setup, allowing for precise monitoring of specific areas.
advertisement
User Guide
3-4. Setup – Device Mode
Set the values for device setting. Navigate through menu items by pressing the UP or DOWN button. User can change the value of the menu item by pressing the LEFT or RIGHT button.
Figure 3.4.1. Device mode setup screen
Table 3.4.1. Menu items in Device Setup screen
Item Description
ALARM-OUT
Set the sensor, motion, and video loss for each alarm.
PTZ
SPOT CHANNEL
SPOT EVENT DWELL
TIME
KEY TONE
Set the camera speed, number, type and ID
Select channel for spot monitoring.
Set the time of display the channel that the event is activated.
Enable/disable key tone.
25
advertisement
