<b>3-4-1. ALARM-OUT</b>. Active Vision SX-420 60 Pages
Active Vision SX-420 is a high-quality standalone 9/16 channel MPEG-4 Triplex DVR. It offers excellent video quality with a maximum frame rate of 120fps at 352x240 resolution in NTSC mode and 100fps at 352x288 resolution in PAL mode. The device supports continuous, scheduled, motion, sensor, and manual recording modes, providing flexible options for capturing footage. Additionally, it features advanced motion detection with customizable grid-based setup, allowing for precise monitoring of specific areas.
advertisement
Active Vision SX-420 User Guide
REMOTE CONTROL ID Select a ID of remote controller.
1. Select ID.
2. Press the same number as ID set in DVR on a remote controller.
3. Then icon will be displayed on Live screen of DVR that respond to the remote controller.
3-4-1. ALARM-OUT
Table 3.4.2. Menu item in ALARM-OUT Setup screen
Item Description
ALARM OUT
SENSOR IN
Select alarm from 1 to 8.
Enable setting up to 4 sensors of 16 sensors.
MOTION ON
Enable setting up to 4 cameras of 16 cameras.
VIDEO LOSS ON
Enable setting up to 4 cameras of 16 cameras.
ALARM DURATION
Set the dwell time of alarm from1 to 60seconds.
SENSOR
Select sensor from 1 to 16.
TYPE
Set the type of sensor for the specified channel from none, N/O
(normal open), and N/C (normal closed).
26
User Guide
Figure 3.4.2. Alarm-out setup screen
27
advertisement
