4-2. SEARCH Window. Active Vision SX-420 60 Pages
Active Vision SX-420 is a high-quality standalone 9/16 channel MPEG-4 Triplex DVR. It offers excellent video quality with a maximum frame rate of 120fps at 352x240 resolution in NTSC mode and 100fps at 352x288 resolution in PAL mode. The device supports continuous, scheduled, motion, sensor, and manual recording modes, providing flexible options for capturing footage. Additionally, it features advanced motion detection with customizable grid-based setup, allowing for precise monitoring of specific areas.
advertisement
User Guide
Button Description
SETUP
Launch the SETUP menu.
SEQ
Enable/disable the automatic sequential display in full or quad mode.
The channel display in quad mode is followed the settings in the setup menu.
PLAY/PAUSE
Launch the SEARCH window.
Use to select channel 1to 4 in full screen mode or to change the quad display in quad display mode by using the LEFT or RIGHT button. And use to select and highlight a channel to display in full display mode in 9 split display mode.
The channel display in quad display mode is followed the setting in the
SEL
ESC
setup menu.
Switch between full screen and current display mode.
No action
REC
Select for manual recording for all channels.
4-2. SEARCH Window
Press PLAY/PAUSE button in live mode to enter SEARCH window. The screen will appear as in figure 4.2.1. The SEARCH window is used to find the stored video. Within the SEARCH menu, 3 categories of search filters can be applied: DATE, CHANNEL, and TYPE. Use the SEL button to move down the categories and use the UP button to move up the categories. The ESC button will return user to the live screen.
39
Active Vision SX-420 User Guide
Figure 4.2.1. Search mode screen
Searching for an event:
1. Select a date of the video to begin searching, Use the LEFT or RIGHT button and UP or
DOWN button to navigate through the date.
2. Once you have selected the date, press the SEL button to move to the CHANNEL selector.
3. Use the LEFT or RIGHT button to change the channel selection from ALL to any of the nine available channels.
4. Once you have selected the channel, press the SEL button to move to the TYPE selector.
5. Use the LEFT or RIGHT button to change the type of recording to ALL, MOTION, SENSOR,
MANUAL, or CONTINUOUS.
6. Once you have selected the type of recording to search for, press the SEL button to see the list of recorded video.
7. To launch archiving function in playback mode, press the ARCH button.
8. Use the UP or DOWN button to scroll through the onscreen listings.
9. Use the LEFT or RIGHT button to display the event lists that happened previous or after the current list.
10. Once the desired event has been selected, press the SEL or PLAY/PAUSE button to play the selected video.
40
advertisement
