7-4-1. Main user interface. Active Vision SX-420 60 Pages
Active Vision SX-420 is a high-quality standalone 9/16 channel MPEG-4 Triplex DVR. It offers excellent video quality with a maximum frame rate of 120fps at 352x240 resolution in NTSC mode and 100fps at 352x288 resolution in PAL mode. The device supports continuous, scheduled, motion, sensor, and manual recording modes, providing flexible options for capturing footage. Additionally, it features advanced motion detection with customizable grid-based setup, allowing for precise monitoring of specific areas.
advertisement
7-4-1. Main user interface
Active Vision SX-420 User Guide
7-4-2. Main control panel
Button Description
Display of current time.
Display of current connected IP address
Click this icon to connect to the DVR
CONNECT
Once you click the connection icon, this pop up window appears. Enter the IP address (or Subdomain name) and a port number. And select the protocol type and enter password.
48
DISCONNECT
SEARCH
LIVE
LOCK
UNLOCK
User Guide
Click this icon to disconnect to the DVR
Click this icon to search for recorded videos.
Click this icon to see a live video.
Click this icon to lock all operations of client software
Click this icon to unlock all operations of client software.
Once you click the lock or unlock icon, this pop up window appears. You need to remember the pass word and enter the pass word when you try to operate the client software.
User can control PAN/TILT & ZOON FOCUS of remote camera.
PLAY
PAUSE
RECORD
Click this icon to play live video.
Click this icon to pause live video.
Enable or disable recording of live video to local disk which has set in setup menu
49
CAPTURE
Active Vision SX-420 User Guide
Click this icon to capture a still image
Once you click the capture icon, this pop up window appears. A still image is captured in bmp file format.
SETUP
Click this icon to setup configuration of client software.
Click this icon to terminate client software.
+
TERMINATE S/W
ROTATE CH
Alarm indicators for each channels.
Alarm relay can be controlled with this button
(1 time)
Full screen
Click 1ch division mode and camera channel in a row
Division screen
4 Division/ 9 Division/ 16 Division
Click this icon for Sequential display of each channel in full screen mode.
Use the volume control bar to set the audio level.
HDD storage Indicator of DVR
It shows information of client connection.
Maximize /Minimize /Exit of the client viewer
50
advertisement
