8-3. Using Client Program. Active Vision SX-420 60 Pages
Active Vision SX-420 is a high-quality standalone 9/16 channel MPEG-4 Triplex DVR. It offers excellent video quality with a maximum frame rate of 120fps at 352x240 resolution in NTSC mode and 100fps at 352x288 resolution in PAL mode. The device supports continuous, scheduled, motion, sensor, and manual recording modes, providing flexible options for capturing footage. Additionally, it features advanced motion detection with customizable grid-based setup, allowing for precise monitoring of specific areas.
advertisement
8-3. Using Client Program
[Step 1]
. Execute the Program.
. xxxxx.exe in desktop [Click]
[Step 3]
. Program will be executed.
. [Click]
[Step 2]
. Program will be executed.
User Guide
[Step 4]
. Insert registered values like below.
. IP Address : Domain Name(entel.esthub.co.kr) or
Static IP.
. Port No : 5445(Default Value)
. Protocol : TCP(Default Value)
. Password : xxxx(Network Password)
59
[Step 5]
. In Desttop of Windows.
Start -> Run -> CMD [Enter]
Active Vision SX-420 User Guide
[Step 6]
. In order to check the status is normal, Use Ping
Test
.
Ping entel.esthub.co.kr [Enter]
This picture shows 61.73.18.198 is bound to entel.esthub.co.kr in DDNS.
60
advertisement
