1

Using the Bookmark Function

The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you can quickly find the section at a later time.

Using the Bookmark Function (DVD/VCD)

1

During play, press the BOOKMARK button on the remote. The Bookmark icons will be displayed.

Use the LEFT/RIGHT buttons to move to the desired bookmark icon.

3

When you reach the scene you want to mark, press the ENTER button. The icon will change to a number (1, 2, or 3).

4

Press the BOOKMARK button to turn off the display.

Recalling a Marked Scene

During play, press the BOOKMARK button on the remote.

Use the LEFT/RIGHT buttons to select a marked scene.

Press the PLAY/PAUSE button to skip to the marked scene.

36

Clearing a Bookmark

During play, press the BOOKMARK button on the remote.

Use the LEFT/RIGHT buttons to select the bookmark number you want to delete.

Press the CLEAR button to delete a bookmark number. Press the BOOKMARK button to turn off display.

NOTE

• Up to three scenes may be marked at a time.

• When in VCD 2.0 mode (MENU

ON mode), this function does not work.

• Depending on the disc, the

Bookmark function may not work.

ENG

Using the Zoom & 3D Sound Functions

Using the Zoom Function (DVD/VCD)

1

During play or pause mode, press the ZOOM button on the remote. A square will be displayed on screen.

2

Use the UP/DOWN or LEFT/RIGHT button to select the part of the screen you want to zoom in on.

3

Press the ENTER button.

- During DVD play, press ENTER to zoom in

2X/4X/2X/Normal in order.

- During VCD play, press ENTER to zoom in

2X/normal in order.

Using the 3D Sound Function

The simulated surround effect depends on the disc contents. If you connect the unit to your stereo system, you can enhance sound quality and produce a greater surround effect. This feature is useful when you are using the DVD player with a two channel stereo through the analog outputs.

(Discs which are recorded with LPCM or DTS will not work. When the DIGITAL OUTPUT or MPEG-2 is set to BITSTREAM in the SETUP MENU, the 3D

Sound function will not work.)

During play, press the 3D button. The 3D

SOUND mark will be displayed on screen.

(Be sure the DIGITAL OUTPUT is set to PCM.)

Press the UP/DOWN buttons to turn the 3D

Sound feature on or off.

NOTE

• 3D Sound is possible only on discs recorded using DOLBY SURROUND or

DOLBY DIGITAL. However, some of these discs do not contain rear channel sound signals.

• Depending on the disc, the Zoom and

3D Sound function may not work.

37

ENG

Downloaded from www.Manualslib.com

manuals search engine

MP3 Play

When an MP3 Disc is inserted into the DVD PLAYER, the first song file of the first folder plays.

MP3 Play Function

1

Press STOP to stop playback of the first song file, then press RETURN to display the music folder menu on the right side of the screen. Up to 8 music folders can be displayed at a time. If you have more than 8 folders on a disc, press the LEFT/RIGHT buttons to bring them up on the screen.

2

Use the UP/DOWN buttons to select the desired music folder, the press ENTER. Use the UP/DOWN buttons again to select a song file. Press ENTER to begin playback of the song file.

Program/Random playback

Press the MODE button to switch between the RANDOM and PROGRAM modes. See page 27 for more information on these modes.

NOTE

• Press the REPEAT button to hear a song file repeatedly.

Press Repeat again to release the Repeat mode.

38

ENG

MP3 Play

CD-R MP3 disc requirements

When playing CD-R MP3 discs, please follow the recommendations below:

• Your MP3 files should be ISO 9660 or JOLIET format.

ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and with Apple's

Mac. These two formats are the most widely used.

• When naming your MP3 files do not exceed 8 characters, and place ".mp3" as the file extension.

General name format of: Title.mp3. When composing your title, make sure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).

• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.

Sound quality with MP3 files basically depends on the rate of compression/decompression you choose.

Getting audio CD quality sound requires an analog/digital sampling rate (conversion to MP3 format) of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better sound quality.

Conversely, files with sampling rates below 128 Kbps will not be played properly.

• Do not try recording copyright protected MP3 files.

Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are of the following types: Windows Media

TM

(registered trade mark of Microsoft Inc) and SDMI mark of The SDMI Foundation). You cannot copy such files.

TM

(registered trade

• Your DVD player only accepts one level of file directory.

Consequently you must choose:

-either to save all your MP3 recording files at the root of the disc;

-and/or create folders in the directory for each artist or music type (e.g.classical, rock, jazz, etc)

• Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings, or as an assurance of sound quality.

You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality and in some cases, inability of the player to read the files).

ENG

39

Downloaded from www.Manualslib.com

manuals search engine

Using the Setup Menu

The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have.

1

With the unit in Stop mode, press the SETUP button on the remote.

Player Menu :

Setup of the Display Language

Use the Player preference menu to select the language for the player’s on-screen displays.

Disc Menu :

Setup of the Menu Language

Use the Menu preference menu to select the language you want a

DVD’s disc menu to be displayed in.

Audio :

Setup of the Audio Language

Use the Audio preference menu to select the soundtrack language.

Subtitle :

Setup of the Subtitle Language

Use the Subtitle preference menu to select the language the disc’s subtitles are to be displayed in.

Parental :

Setup of the Parental Level

Allows users to set the level necessary to prevent children from viewing unsuitable movies such as those with violence, adult subject matter, etc.

Audio Options :

Setup of the Audio Options

Display Options :

Setup of the Display Options

Use to select which type of screen you want to watch and several display options.

2

Use the UP/DOWN buttons on the remote to access the different features.

3

Press the ENTER button to access the sub features.

To make the setup screen disappear after setting up, press the

SETUP button again.

NOTE

Depending on the disc, some

Setup Menu selections may not work.

40

ENG

Setting Up the Language Features

If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie.

Using the Player Menu Language

1

2

3

4

5

With the unit in Stop mode, press the

SETUP button.

Use the UP/DOWN buttons to select the

Player Menu.

Press the ENTER button.

Use the UP/DOWN buttons to select

‘English’.

Press the ENTER button.

- English is selected and the screen returns to SETUP

MENU.

- To make the SETUP MENU disappear, press the

RETURN button.

Using the Disc Menu Language

This function changes the text language only on the disc menu screens.

1

2

3

With the unit in Stop mode, press the

SETUP button.

Use the UP/DOWN buttons to select

Disc Menu.

Press the ENTER button.

Use the UP/DOWN buttons to select

‘English’.

- Select “Others” if the language you want is not listed.

5

Press the ENTER button.

- English is selected and the screen returns to SETUP

MENU.

ENG e.g

Setting up in English.

e.g

Setting up in English.

41

Downloaded from www.Manualslib.com

manuals search engine