Selector gain level. Macrom M-DSPA.401

Add to My manuals
16 Pages

advertisement

Selector gain level. Macrom M-DSPA.401 | Manualzz

APP overview

Selector gain level

1. Cancel, selection cancel.

2. Type the value for the level between -90 to + 5dB.

3. Cursor to change the value of the level.

4. OK, press to confirm the selection.

1

2

Selector frequency cuts

1. Cancel, selection cancel

2. Type the value of the selected cutoff frequency between 20Hz to 20,000Hz.

3. OK, press to confirm the selection.

1

2

Slope selector

1. Cancel, selection cancel

2. Slope selector of 6 dB / octava

3. Slope selector of 12dB / octava

4. Slope selector 18 dB / octava

5. Slope selector 24 dB / octava

6. Bypass Switch (band pass)

NOTE: no cutting or gradient applied to the selected section.

1

3

4

5

2

3

6

3

4

- 12 -

advertisement

Related manuals

Frequently Answers and Questions

What is the maximum power output of the M-DSPA.401?
The maximum power output is 150 Watts by 4 channels (76W RMS).
What is the operating frequency range of the M-DSPA.401?
The operating frequency range is from 20Hz to 20KHz.
What is the Signal to noise ratio of the M-DSPA.401?
The Signal to noise ratio is > 120dB.
What is the Dynamic range of the M-DSPA.401?
The Dynamic range is > 100dB.
What is the THD of the M-DSPA.401?
The THD is < 0.001% at 1KHz.
What is the Standby current of the M-DSPA.401?
The Standby current is < 0.1mA.
What is the Max current consumption of the M-DSPA.401?
The Max current consumption is 20A.
What is the Operation voltage range of the M-DSPA.401?
The Operation voltage range is from 9Volts to 15.5Volts.
What are the dimensions of the M-DSPA.401?
The dimensions are 195mm x 130mm x 38mm.
How do I connect the M-DSPA.401 to my mobile phone?
You can connect the M-DSPA.401 to your mobile phone via Bluetooth. Download the M-DSPA.401 APP from the Google Play or Apple store, install it on your phone, and then pair your phone with the M-DSPA.401.