SPT510-35PL X 4/6 Printheads Calibration and Maintenance

Chapter 3: Characteristics

„

SPT510_35pl x 6/4；

„ Resolution: 1080\720\360\180 DPI;

„ Colors：6/4 colors ;

„ Setting of multi-printing;

„ Automatically flash jetting：Automatically clean printheads by flash jetting during printing;

„ Home flash jet: Prevent nozzles of printheads block while not in printing state; distance from image;

„ Able to align printheads, step difference ,and bi-direction difference;

„ Able to print uni-direction or bi-direction and mirror ;

„ Edge feather: Lighten pass line;

„ Cleaning System: Setting of auto-cleaning with Solvent;

„ Individual Positive Pressure Cleaning System: Clean with ink for each color, and avoid the waste of ink;

5

Chapter 4: Software Installation

This software consist of printer driver, printing adjustment and picture printing functions. Running this software requires a certain hardware and software condition. Herein, you are going to be introduced the operating system environment required, software and hardware configuration and software installation

Please follow the following steps to install the software. below.

2) Then follow the above instruction, click “Next”, the following interface will show up, you have to enter the user and company name as well.

6

3) Click “Next”, installation path is available to choose.

Choose the directory to install.

4) By clicking “Next”, the installation progress will appear, then click “Confirm”, “configuration file options” dialog box will appear as shown below. Then, choose the

SPT5106_35pl.ini

file which corresponding to the print head.

7