BDP-150 BDP-150-K BDP-150-S

Add to my manuals
52 Pages

advertisement

BDP-150 BDP-150-K BDP-150-S | Manualzz

BDP-150_VXE8_IBD_EN.book 19 ページ 2012年3月12日 月曜日 午後4時10分

Chapter 3

Getting Started

Making settings using the Setup Navigator menu

Be sure to perform these settings when using the player in the following situations.

• When you use the player for the first time.

• After Initial Setup format.

• After updating the player’s software.

Caution

• Before turning on the power, check that the connections between the player and other devices are correct. Also, turn on the power of the devices connected to the player before turning on the player’s power.

• When using a Pioneer Flat Screen TV or front projector compatible with the Control function, set

Control to On on the connected device before turning on the player’s power.

3 Start Setup Navigator.

Press ENTER.

Setup Navigator starts.

4 Select the OSD language.

Use / to select, then press ENTER.

When a Pioneer Flat Screen TV that is compatible with

Control function is connected to this player’s HDMI OUT terminal, language settings are imported from the

Pioneer Flat Screen TV’s language settings before

Setup

Navigator begins.

5 Select the appropriate output resolution for the connected TV.

Use / to select, then press ENTER.

6 Select the appropriate aspect for the connected

TV.

Use

/ to select, then press ENTER.

7 Close the Setup Navigator menu.

Press ENTER.

Setup Navigator finishes and the setting is stored.

• Press screen.

RETURN to go back to the previous

Note

• When a Pioneer Flat Screen TV or front projector compatible with the Control function is connected to the player using an HDMI cable, the player is automatically set to the optimum picture quality for the connected device.

03

1 Turn on the TV’s power and switch the input.

See the TV’s operating instructions for the details of operating the TV.

2 Turn on the player’s power.

Press  STANDBY/ON.

Check that the Setup Navigator menu is displayed.

If the Setup Navigator menu is not

displayed

Press

HOME MENU to display the Home

Menu, select Initial Setup

Setup Navigator

Start, then press ENTER.

19

En

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents