BDP-150 BDP-150-K BDP-150-S

Add to my manuals
52 Pages

advertisement

BDP-150 BDP-150-K BDP-150-S | Manualzz

07_advanced_settings.fm 33 ページ 2012年3月26日 月曜日 午後5時25分

Chapter 7

Advanced settings

Changing the settings

Operating the Initial Setup screen

1 When playback is stopped, display the Home

Menu screen.

Press HOME MENU.

2 Select and set Initial Setup.

Use

/ to select, then press ENTER.

3 Select the item and change the setting.

Use /// to select, then press ENTER.

Closing the Initial Setup screen

Press HOME MENU or RETURN.

07

Note

• The items that can be selected depend on the player’s status.

• In Options, the factory default settings are indicated in bold.

Setting

TV Screen

Options

16:9 Full

16:9 Normal

4:3 Pan&Scan

Explanation

Select this when connecting to a wide (16:9) TV.

Select this when connected to a wide (16:9) TV. 4:3 pictures are displayed with vertical black bars along the sides.

Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The video will be played with the left and right sides of the image cut off to display on the 4:3 screen. (This function works if the disc is labeled for 4:3PS.)

Video Adjust

Sharpness

4:3 Letterbox Select this when connecting to a 4:3 screen TV and playing a 16:9 video. The video will be played with black bands at the top and bottom.

The quality of the playback picture can be adjusted according to the TV you are using (page 37).

High

Middle

Choose the level of sharpness.

Video Mode

Low

Standard

Vivid

Cinema

Choose the video output mode.

Custom

• CTI (Color Transient Improvement): Provides images with clearer color contours.

Noise Reduction Choose the level of noise reduction.

0

1

2

3

33

En

07_advanced_settings.fm 34 ページ 2012年3月23日 金曜日 午前11時10分

07

Setting

Digital Output

DTS Downmix

Options

Bitstream

PCM

Reencode

Off

Stereo

Explanation

Select this to output digital audio signals directly.

Select this to output digital audio signals converted to PCM audio signals.

When a BD containing secondary audio and interactive audio is played, the two audio signals are mixed and converted to Dolby Digital audio or DTS audio for output.

Select this to output audio signals other than digital audio signals.

DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or

DTS Digital Surround audio signals converted to linear PCM audio signals are converted into 2-channel (stereo) signals for output.

Lt/Rt DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or

DTS Digital Surround audio signals converted to linear PCM audio signals are converted into 2-channel signals compatible with Dolby Surround for output (when the connected AV receiver or amplifier, etc., is compatible with

Dolby Pro Logic, the AV receiver or amplifier outputs the linear PCM audio signals as surround audio signals).

Select this when playing a disc recorded with a sampling frequency of 48 kHz. Downsampling

48k

96k

192k

Select this when playing a disc recorded with a sampling frequency of 96 kHz.

Select this when playing a disc recorded with a sampling frequency of 192 kHz.

Select this to output audio signals without using the DRC function.

DRC (Dynamic Range

Control)

Off

On

Auto

Select this to adjust the range between the loudest and softest sounds

(dynamic range) for playback at average volume. Use this when it is hard to hear dialog or when watching movies at midnight.

Select to switch the DRC setting On/Off automatically according to the input audio signal from the disc. This only affects Dolby TrueHD signals.

• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.

• DRC affects audio signals output from the following audio output terminals:

– Analog audio signals output from the AUDIO OUT terminals

– Linear PCM audio signals output from the DIGITAL OUT or HDMI OUT terminals

• Depending on the disc, the effect may be weak.

• The effect may differ depending on the speakers, the AV amplifier settings, etc.

34

En

07_advanced_settings.fm 35 ページ 2012年3月23日 金曜日 午前11時10分

Setting

Color Space

Resolution

Connection Test

Internet Connection

BD-Live Connection

DLNA

Options

RGB

YCbCr

YCbCr 422

Full RGB

Auto

Explanation

Select this to output the video signals as RGB signals. Choose this if the colors seem too faint and the black seems too bright.

Select this to output the video signals as YCbCr 4:4:4 signals.

Select this to output the video signals as YCbCr 4:2:2 signals.

Select this to output the video signals as RGB signals. Choose this if the colors seem too dense and all the dark colors are displayed in a uniform black.

Select this to choose the resolution of the video signals output from the

HDMI OUT terminal automatically.

Output the video signals from the HDMI OUT terminal with the selected resolution.

The resolution can be changed by pressing HDMI, but Auto cannot be selected.

HDMI Audio Out

HDMI 3D

3D Notice

IP Setting

Proxy Server

Information

480I/576I

480P/576P

720P

1080I

1080P

Bitstream

PCM

Reencode

Select this to output HDMI audio signals directly.

Select this to output HDMI audio signals converted to 2-channel audio signals.

When a BD containing secondary audio and interactive audio is played, the two audio signals are mixed and converted to Dolby Digital audio or DTS audio for output.

Control

Off

On

Select this when you do not want to output the audio signal from the HDMI output terminal.

Select this to control the player with the remote control of the connected AV device using an HDMI cable. Also refer to page 13.

Off Select this when you do not want to control the player with the remote control of the connected AV device using an HDMI cable.

To use Sound Retriever Link and Stream Smoother Link (page 14), Control must be set to On.

HDMI Deep Color 30bits Select this when outputting the video signals with 30-bit color.

Select this when outputting the video signals with 36-bit color.

HDMI 1080P 24Hz

36bits

Off

On

Select this when outputting the video signals with normal 24-bit color.

Select this when Resolution is set to Auto or 1080P and outputting 1080p/24 video signals to a TV compatible with 1080p/24.

Off Select this when Resolution is set to 1080P and outputting 1080p/60 video signals to a TV compatible with 1080p/60.

With 3D discs, the disc is played with 3D images.

Auto

Off

Yes

No

3D images are not played.

This sets whether or not to display the 3D notice when playing 3D images.

Select this to set the IP address of the player and DNS server (page 37).

Only set the proxy server if so instructed by your Internet service provider (page 38).

Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server

(primary) and DNS server (secondary).

Select this to test the network connection (page 38).

Enable

Select this when connecting to the Internet.

Disable Select this when not connecting to the Internet.

All discs are allowed to connect to BD-LIVE.

Permitted

Partial Permitted

Prohibited

Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.

No disc is allowed to connect to BD-LIVE.

Enable

Disable

Select this when connecting to DLNA server.

Select this when not connecting to DLNA server.

07

35

En

BDP-150_VXE8_IBD_EN.book 36 ページ 2012年3月12日 月曜日 午後4時10分

07

Setting

OSD

Options Explanation

available languages Choose a language for the on-screen displays from the listed languages.

Audio

* For some discs, it may not be possible to change to the selected language.

available languages Choose a language from the listed languages to set the default audio language for BD-ROM and DVD-Video playback.

If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.

Subtitle

* For some discs, it may not be possible to change to the selected language.

available languages Choose a language from the listed languages to set the default subtitle language for BD-ROM and DVD-Video playback.

If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.

Menu

* For some discs, it may not be possible to change to the selected language.

available languages Choose a language from the listed languages to set the default language for

BD-ROM and DVD-Video menus.

If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected for playback.

Angle Mark

On

Select this to display the angle mark on the TV screen (page 22).

Off Select this if you do not want to display the angle mark on the TV screen.

PIP Mark

Secondary Audio Mark

Netflix Information

DivX(R) VOD DRM

On

Off

Select this to display the PIP mark on the TV screen.

Select this if you do not want to display the PIP mark on the TV screen.

On

Off

Select this to display the secondary audio mark on the TV screen (page 25).

Select this if you do not want to display the secondary audio mark on the TV screen.

Activate and deactivate your Netflix information. Also check your Netflix ESN.

Registration Code Displays the player’s registration code required to play DivX VOD files

(page 9).

Internet Setting

Disc Auto Playback

Last Memory

PBC (Play Back Control)

Setup Navigator

Change Password

Permitted

Partial Permitted

Prohibited

On

Off

On

Web contents can be watched without entering the password.

The password must be entered to watch web contents.

No web contents can be watched.

Discs are played automatically after they are loaded.

Loaded discs do not start playing automatically.

Select this to save the point at which you last stopped playback, even after the disc tray is opened or you switch to the standby mode.

Select this when you want to use only Continue Viewing Play (page 26).

Off

On

Select this to play Video-CDs (version 2.0) compatible with PBC using the disc menu.

Off Select this to play Video-CDs (version 2.0) compatible with PBC without using the disc menu.

Start making the settings using the Setup Navigator menu. For details, see page 19.

Parental Control

Country Code

Register (change) the password for parental lock settings or for unlocking to play DVD-Videos with the parental lock feature (page 38).

Change the player’s parental lock level (page 39).

Change the Country/Area code (page 39).

36

En

BDP-150_VXE8_IBD_EN.book 37 ページ 2012年3月12日 月曜日 午後4時10分

Setting

Screen Saver

Auto Power Off

Quick Start

Update

Load Default

System Information

Disc Auto Update

BUDA

Options

Off

1 min

2 min

3 min

Off

Explanation

The screen saver is not activated.

The screen saver will be activated if no operation has been performed for more than one minute/two minutes/three minutes. Operating the remote control can deactivate the screen saver.

10 min

20 min

30 min

On

Off

Disc

Select this if you do not want the power to turn off automatically. This is the default setting for models other than European models.

The power will be automatically turned off if no operation has been performed for more than 10 minutes/20 minutes/30 minutes. The default setting for

European models is 30 minutes.

Select to shorten the required time to boot up.

Select to perform normal bootup.

Select the method of software updating. (page 39)

USB Storage

Network

Restore the settings to the factory default.

Check the system version number.

On

Display the software update screen when the disc with the player’s update file is loaded.

Off The software update screen must be displayed manually. (page 39)

BUDA Information Display and set up the BUDA data on the connected USB device.

BUDA Setup

Adjusting the video

1 Select and set Display Setting

Video Adjust

Next Screen.

Use / to select, then press ENTER.

2 Select the item and change the setting.

Use

/ to select the item, then use / to change the setting. Once the setting is completed, press

RETURN to close the settings screen.

Item

Brightness

Contrast

Hue

Saturation

Description

Select this to adjust the TV screen’s brightness.

Select this to adjust the TV screen’s contrast.

Select this to adjust the color (green and red) balance of the TV screen.

Select this to adjust the TV screen’s saturation.

Setting the IP address

1 Select and set Network

IP Setting Next

Screen.

Use / to select, then press ENTER.

2 Set IP address.

Use

/// to set the IP address of the player or DNS server, then press ENTER.

Auto Set IP Address

On – The player’s IP address is obtained automatically. Select this when using a broadband router or broadband modem that has a DHCP

(Dynamic Host Configuration Protocol) server function. This player’s IP address will automatically be allocated from the DHCP server.

Off – The player’s IP address must be set manually.

Use the number buttons (0 to 9) to input the IP address, subnet mask and default gateway.

Note

• For information on the DHCP server function, refer to the operating instructions for the network device.

• You may need to contact your Internet service provider or network administrator when inputting the

IP address manually.

07

37

En

BDP-150_VXE8_IBD_EN.book 38 ページ 2012年3月12日 月曜日 午後4時10分

07

Setting the proxy server

Only set the proxy server if so instructed by your Internet service provider.

1 Select and set Network

Proxy Server Next

Screen.

Use / to select, then press ENTER.

2 Select and set Use or Not use at Proxy Server.

Use

/ to change, then press .

Use – Select this when using a proxy server.

Not use – Select this when not using a proxy server.

If you have selected

Use, proceed to step 3.

3 Select and set Server Select Method.

Use

/ to change, then press .

IP Address – Input the IP address.

Server Name – Input the server name.

4 Input IP Address or Server Name.

Use the number buttons (0 to 9) to input the number if you select IP address in step 3. Use / to move the cursor.

When Server Name is selected in step 3, use the number buttons (0 to 9) to launch the software keyboard. Now use

/// to select characters and items, then press

ENTER to input.

5 Input Port Number.

Press , then use the number buttons (0 to 9) to input the number.

6 Press ENTER to set.

Displaying the network settings

Select and set Network Information Next

Screen.

Use

/ to select, then press ENTER.

The MAC address, IP address, subnet mask, default gateway and DNS server (primary and secondary) settings are displayed.

When Auto Set IP Address is set to On, the values obtained automatically are displayed.

Note

• “0.0.0.0” is displayed when each IP address has not been set.

Testing the network connection

Select and set Network Connection Test

Start.

Use / to select, then press ENTER.

“Network is OK.” is displayed once the test is completed.

If any other message is displayed, check the connections and/or settings (pages 17 and 37).

Changing to other language at

language setting

1 Select and set Language.

Use

/ to select, then press ENTER.

2 Select and set OSD, Audio, Subtitle or Menu.

Use / to select, then press ENTER.

3 Select and set the desired language.

Use

/ to select, then press ENTER.

Note

• If a language not recorded on the BD/DVD is set, one of the recorded languages is automatically selected and played.

Erasing data that has been added to

BDs and application data

Use this procedure to erase data that has been added to

BDs (data downloaded with the BD-LIVE function and data used with the BONUSVIEW function) and application data.

Caution

• Some time is required to erase the data.

• Do not unplug the power cord while data is being erased.

1 Select and set BUDA

BUDA Setup.

Use / to select, then press ENTER.

2 Select and set Fmt buda.

Press ENTER.

Registering or Changing the

password

Use this procedure to register or change the code number required for the Parental Lock settings.

About default password of this unit

The default password is “0000”.

• This unit might ask you to enter a password when you change the password.

• If you reset this unit, your password is simultaneously changed to the default setting.

1 Select and set Security

Change Password

Next Screen.

Use / to select, then press ENTER.

2 Input the password.

Use the number buttons (0 to 9) to input the number, then press ENTER to set.

Use

/ to move the cursor.

38

En

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents